ESD electronic XMC-CPU/2041 Manuale utente

XMC-CPU/2041

XMC/PMC Quad Core PowerPC™ CPU

with FPGA

Hardware Manual

to Product V.2029.01

XMC-CPU/2041 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 Page 1 of 29

esd electronic system design gmbh

Vahrenwalder Str. 207 • 30165 Hannover • ermany

http://www.esd.eu

Phone: +49 (0) 511 3 72 98-0 • Fax: +49 (0) 511 3 72 98-68

N O T E

The information in this document has been carefully checked and is believed to be entirely reliable.

e d makes no warranty of any kind with regard to the material in this document, and assumes no

responsibility for any errors that may appear in this document. In particular descriptions and

technical data specified in this document may not be constituted to be guaranteed product features

in any legal sense.

e d reserves the right to make changes without notice to this, or any of its products, to improve

reliability, performance or design.

All rights to this documentation are reserved by e d. Distribution to third parties, and reproduction

of this document in any form, whole or in part, are subject to e d's written approval.

esd electronic system design gmbh

Vahrenwalder Str. 207

30165 Hannover

Germany

Phone: +49-511-372 98-0

Fax: +49-511-372 98-68

E-Mail: [email protected]

Internet: www.esd.eu

Trademark Notices

PowerPC™ and the PowerPC logo™ are trademarks of IBM in the United States and/or other countries.

VITA™ is a trademark of the VMEbus International Trade Association in the United States and other countries.

PCI Express® is a registered trademark of PCI-SIG.

Linux® is the registered trademark of Linus Torvalds in the United States and/or other countries.

VxWorks® is a registered trademark of Wind iver Systems, Inc.

QNX® is a registered trademark of QNX Software Systems Limited, and are registered trademark and/or used in certain

jurisdictions.

All other trademarks, product names, company names or company logos used in this manual are reserved by their

respective owners.

Page 2 of 29 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 XMC-CPU/2041

Document file: I:\Texte\Doku\MANUALS\PMC-XMC\XMC-CPU2041\Englisch\XMC-CPU2041_Manual_en_14.odt

Date of print: 2015-06-23

Document type

number: DOC0800

Hardware ver ion: 1.0

Document Hi tory

The changes in the document listed below affect changes in the hardware as well as changes in

the description of the facts, only.

Revi ion Chapter Change ver u previou ver ion Date

1.0 - First English manual 2014-03-13

1.1 7.1 Note to bootloader source changed 2014-03-14

1.2 - Notes “Conformity” and “Data Safety” inserted in Safety Instructions 2014-12-01

1.3

1. Block circuit diagram new, description of options deleted

2015-04-15

3. Description of o-ring mounting inserted

4.1 Maximum absolute power inserted

4.2 Values of EEP OM and DD 3 AM changed

4.3 Description of optional interfaces deleted,

4.12 Chapter Software Support, Chapter Serial Interfaces via P14 (Option) deleted

8. Order Information revised

1.4

2.2 Figure 2 new

2015-06-23

2.3 Figure 3 new

5.6 New chapter, description of X900 adapters

5.7 New chapter, description of X400 adapter

8. Order Information, adapters inserted

Technical details are subject to change without further notice.

XMC-CPU/2041 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 Page 3 of 29

Safety In truction

● When working with the XMC-CPU/2041 follow the instructions below and read the manual carefully to protect yourself

from injury and the XMC-CPU/2041 from damage.

● The device is a built-in component. It is essential to ensure that the device is mounted in a way that cannot lead to

endangering or injury of persons or damage to objects.

● The device has to be securely installed in the control cabinet before commissioning.

● Protect the XMC-CPU/2041 from dust, moisture and steam.

● Protect the XMC-CPU/2041 from shocks and vibrations.

● The XMC-CPU/2041 may become warm during normal use. Always allow adequate ventilation around the XMC-

CPU/2041 and use care when handling.

● Do not operate the XMC-CPU/2041 adjacent to heat sources and do not expose it to unnecessary thermal radiation.

Ensure an ambient temperature as specified in the technical data.

● Do not use damaged or defective cables to connect the XMC-CPU/2041.

● In case of damages to the device, which might affect safety, appropriate and immediate measures must be taken, that

exclude an endangerment of persons and domestic animals and property.

● Current circuits which are connected to the device have to be sufficiently protected against hazardous voltage (SELV

according to EN 60950-1).

● The XMC-CPU/2041 may only be driven by power supply current circuits, that are contact protected.

A power supply, that provides a safety extra-low voltage (SELV or PELV) according to EN 60950-1, complies with this

conditions.

Attention !

Electro tatic di charge may cau e damage to electronic component .

To avoid this, please perform the steps described on page 10 before you touch the XMC-

CPU/2041, in order to discharge the static electricity from your body.

Qualified Per onal

This documentation is directed exclusively towards personal qualified in control and automation engineering.

The installation and commissioning of the product may only be carried out by qualified personal, which is authorized to

put devices, systems and electric circuits into operation according to the applicable national standards of safety

engineering.

Conformity

This device is a sub-assembly intended for incorporation into an apparatus by a manufacturer and NOT by the end user.

The manufacturer of the final system must decide, whether additional EMC or EMI protection requirements are

necessary.

Data Safety

This device is equipped with an Ethernet or other interface which is suitable to establish a connection to data networks.

Depending on the software used on the device, these interfaces may allow attackers to compromise normal function, get

illegal access or cause damage.

esd does not take responsibility for any damage caused by the device if operated at any networks. It is the responsibility

of the device's user to take care that necessary safety precautions for the device's network interface are in place.

Intended U e

The intended use of the XMC-CPU/2041 is the operation as XMC/PMC Quad Core PowerPC™ CPU with FPGA.

The guarantee given by esd does not cover damages which result from improper use, usage not in accordance with

regulations or disregard of safety instructions and warnings.

● The XMC-CPU/2041 is intended for installation on a base board according to IEEE 1386.1-2001 (PMC) or Vita 42.3

(XMC).

● The operation of the XMC-CPU/2041 in hazardous areas, or areas exposed to potentially explosive materials is not

permitted.

● The operation of the XMC-CPU/2041 for medical purposes is prohibited.

Service Note

The XMC-CPU/2041 does not contain any parts that require maintenance by the user. The XMC-CPU/2041 does not

require any manual configuration of the hardware.

Di po al

Devices which have become defective in the long run have to be disposed in an appropriate way or have to be returned

to the manufacturer for proper disposal. Please, make a contribution to environmental protection.

Page 4 of 29 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 XMC-CPU/2041

Table of content 
Overview...................................................................................................................................... 6
XMC-CPU/2041 View with Connectors and LEDs........................................................................7
1 PCB Top Layer View with Connectors and LEDs...................................................................7
2 PCB Bottom Layer View with LEDs, JTAG and Debug Interface...........................................8
2.1 Indication of CON Activity (LED 1222) and USB PW  (LED1230) ...............................8
3 Front Panel View with Connectors and LEDs........................................................................9
3.1 LED0-4 Indication of the TriColor LEDs ........................................................................9
Hardware Installation..................................................................................................................10
Technical Data...........................................................................................................................11
1 General Technical Data.......................................................................................................11
2 CPU and Memory................................................................................................................12
3 Ethernet Interface................................................................................................................12
4 USB, USB Host Interface.....................................................................................................12
5 CON, USB Device Interface.................................................................................................13
6 PMC Interface......................................................................................................................13
7 XMC Interface ..................................................................................................................... 13
8 I²C Interface.........................................................................................................................14
9  eal-Time Clock ( TC)........................................................................................................14
10 Digital In-/Outputs..............................................................................................................14
11 Health................................................................................................................................15
12 Software Support...............................................................................................................15
Connector Assignments.............................................................................................................16
1 USB, (USB Host, X1200).....................................................................................................16
2 CON, (USB Device, X1220).................................................................................................16
3 Ethernet ETH0, ETH1..........................................................................................................17
4 PMC Connectors..................................................................................................................18
4.1 PMC P11 Connector...................................................................................................18
4.2 PMC P12 Connector...................................................................................................19
4.3 PMC P14 I/O Connector..............................................................................................20
5 P15 PCI Express Interface...................................................................................................22
6 JTAG X900.......................................................................................................................... 23
6.1 XMC-CPU/2041-ADAPTE -BDI..................................................................................23
6.2 XMC-CPU/2041-ADAPTE -NXP................................................................................24
7 Debug Interface X400..........................................................................................................25
7.1 XMC-CPU/2041-ADAPTE -FPGA .............................................................................25
FPGA......................................................................................................................................... 26
Bootloader..................................................................................................................................27
1 License................................................................................................................................ 27
2 Configuration and Console Access......................................................................................27
Order Information....................................................................................................................... 29
XMC-CPU/2041 Hardware Manual • Doc. No.: V.2029.21 /  ev. 1.4 Page 5 of 29

Overview

1. Overview

Figure 1: Block circuit diagram

The XMC-CPU/2041 is an XMC PowerPC Host CPU.

It is a equipped with a PMC and an XMC interface.

The powerful FreescaleTM PowerPCTM QorIQ P2041 with 1.2 GHz is built on Power Architecture®

technology, bringing high-end architectural features pioneered in the P4 platform into the mid

range quad core space.

The local memory bus is 64 bits wide plus 8 bits ECC with an overall capacity of 512 Mbyte.

16 Mbyte SPI Flash for boot loader and 32 Kbit I²C EEP OM for U-Boot environment offer non-

volatile memory spaces.

The XMC-CPU/2041 is equipped with a second 16 Mbyte “fallback” SPI Flash that is used for

system recovery, if a system crash occurs during a firmware update.

The Xilinx® FPGA Spartan® 6 is connected to the CPU by local bus for low latency data exchange.

For high bandwidth data exchange the FPGA is additionally connected via PCI Express to the

CPU. 62 LVTTL-I/Os of the FPGA are routed to the PMC-P14 connector.

The XMC interface comes with 4-lane PCIe bus and is designed according to VITA 42.3.

The PMC interface supports 32 bit / 66 MHz PCI bus according to PCI Local Bus Specification 3.0,

3.3 V voltage level (5 V tolerant) and PCI bus master capability.

The XMC-CPU/2041 is equipped with two Gigabit Ethernet interfaces accessible at the front panel,

which give an excellent base for EtherCAT® applications.

The USB host port supports USB 2.0.

Page 6 of 29 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 XMC-CPU/2041

Memory Bus 64 bit

+ 8 bit ECC

PEX 1x

Pericom

PCIe to PCI

Bridge

PI7C9X111SL

PCI 32 bit 66 MHz

PEX 4x

PMC P11

PMC P12

XMC P15

FPGA - ear I/O

62x LVTTL (3.3 V)

PEX 1x

16Mbyte

Serial Flash

Muxed Local Bus + DMA

1 Gbyte

NAND Flash

GB Ethernet

Phy

Transformer

J45

GMII

GB Ethernet

Phy

Transformer

J45

USB 2.0

Serial

FTDI

USB / Serial

Converter

Mini A/BMini B

Bus Power

DD 3 AM

128 Mbyte

SPI

Health

I²C

SPI-Boot Order

A/D

Converter

Main Power

1.2V

1.5V

1.0V

CPU Temp.

T4 I²C

T3T2T1

Temp. Sensors

PMC P14

Xilinx

Spartan 6

XC6LXT-45T

Freescale

Power PC

P2041

1200 MHz

Digital

Isolator

Electrical Isolation

GMII

I²C

DD 3 AM

512 Mbyte

16bit

8bit

XMC-CPU/2041 View with Connector and LED

2. XMC-CPU/2041 View with Connector and LED

2.1 PCB Top Layer View with Connector and LED

Figure 2: PCB top view

See also page 16 and following for signal assignments of the connectors.

The JTAG connector and the Debug interface connector have to be connected on the PCB bottom

side of XMC-CPU/2041 (see Figure 3 for the position of the connectors and pins).

XMC-CPU/2041 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 Page 7 of 29

XMC-CPU/2041 View with Connector and LED

2.2 PCB Bottom Layer View with LED , JTAG and Debug Interface

Figure 3: PCB bottom view

The Debug interface and the JTAG interfaces have to be connected from the bottom side of the

XMC-CPU/2041. See also page 16 and following for signal assignments of the connectors.

esd offers special adapters as accessories, see “Order Information” on page 29.

2.2.1 Indication of CON Activity (LED 1222) and USB PWR (LED1230)

LED Colour Indication De cription (LED on)

LED name

in schematic

diagram

CON Activity green Activity Data transfer on terminal interface CON LED1222

USB PWR green Power 5 V power supply voltage of USB interface on LED1230

Table 1: LEDs CON Activity and USB PW

Page 8 of 29 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 XMC-CPU/2041

XMC-CPU/2041 View with Connector and LED

2.3 Front Panel View with Connector and LED

Figure 4: Front panel view

2.3.1 LED0-4 Indication of the TriColor LED

Five TriColor LEDs are equipped in the front panel.

LED Colour De cription

Signal name

in schematic

diagram

LEDX

green

User-defined via FPGA and driver

LED10XG

red LED10X

blue LED10XB

(X = 0-4)

Table 2: LEDs 0 - 4

XMC-CPU/2041 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 Page 9 of 29

Hardware In tallation

3. Hardware In tallation

Read the afety in truction at the beginning of thi document carefully, before

you tart with the hardware in tallation!

Danger!

Electric shock risk. Never carry out work while power supply voltage is switched on!

Attention !

Electrostatic discharges may cause damage to electronic components.

To avoid this, please discharge the static electricity from your body before you touch

the XMC-CPU/2041.

Procedure:

1. Switch off your system and all connected peripheral devices (monitor, printer, etc.).

2. Discharge your body as described above.

3. Disconnect the system from the mains.

If the system does not have a flexible mains cable, but is directly connected to mains,

disconnect the power supply via the safety fuse and make sure that the fuse cannot switch

on again unintentionally (i.e. with caution label).

Danger!

Never carry out work while power supply voltage is switched on!

4. Open the case if necessary.

5. For sufficient EMC shielding the XMC-CPU/2041 should make contact to the system's

enclosure nearly completely around its front panel. For this purpose a conductive O-ring is

contained in the product package of the XMC-CPU/2041 module. Mount the conductive O-

ring on the front panel of the XMC-CPU/2041. Additionally or instead of it use shielding

material as for example conductive shielding gasket.

6. emove the carrier board (if already installed) and plug the XMC-CPU/2041 carefully on the

carrier board. Pay attention that the XMC-CPU/2041 is correctly installed on the carrier

board.

Fix the XMC-CPU/2041 with the screws on the carrier board. Use the four M 2.5 x 6 mm

screws which are contained in the product package of the module.

7. Install the carrier board in your system.

8. Close the case again (if necessary).

9. Connect the Ethernet and the USB interfaces via the connectors in the front panel of the

XMC-CPU/2041.

10. Connect the system to mains again (mains connector or safety fuse).

11. Switch on the system and the peripheral devices.

12. End of hardware installation.

Set the interface properties in your operating system. efer to the documentation of the

operating system.

Page 10 of 29 Hardware Manual • Doc. No.: V.2029.21 / ev. 1.4 XMC-CPU/2041

Indice

Altri manuali ESD electronic Hardware per computer

ESD electronic

ESD electronic CAN-PCI/331 Manuale di istruzioni

ESD electronic

ESD electronic CPCI-HD/2 Manuale utente

ESD electronic

ESD electronic CAN-CBM-SIO1 Manuale utente

ESD electronic

ESD electronic EPPC-405-HR Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente