Eshine ELP606DC Manuale utente
LED Puck Lights with Hand Wave Sensor
Dimmable
60mm/2.36″6 pack
2
Thank you for choosing a product of the brand EShine. Before
starting up the lights read through the instructions and store it for
future reference.
Packaging content:
· 6 x LED lights
· 24 x Wire Clips
· 6 x 3M double-sided stickers
· 14 x Screws
· 1 x IR sensor switch
· 1 x 12W 12V DC power supply
Technical specifications
Dimensions 60mm/2.36″x 8mm/0.32″(D/H)
Material Plastic and Aluminum
Operating voltage 12V DC
Power Consumption 6 x 2W, Total 12W
Dimmable Yes, touchless dimming
Color temperature Warm White (3000K) or Cool White (6000K)
Rated life > 30,000 hours
Switching cycles > 15,000
Nominal luminous flux 6 x 150lm, total 900lm
CRI >82
Angle 120 °
Water and Dust Proofing Rating IP20
Protection class III
Operating temperature -20 ° C to + 45 ° C
Precautions
· Please check the LED lights carefully before installing.
· Ensure the power is off before wiring and installing.
· This LED panels must be operated with 12V DC voltage.
· Please do not retrofit the lamp within warranty period.
· Please use this product for indoor only!
· Warning! The packaging contains small parts. Not for children.
3
1.Use screws or 3M double-sided stickers to fasten lights to the
installation location.
To use screws, you need to remove top cover of the light by
unscrewing the outer ring of the lampshade and remove lamp
shade than pass two screws through the screw holes and then fix
the lamp to the installation location (see pic. 1).
You can stick the lights and hand wave sensor switch directly to
the installation location via the double sided 3M adhesive tape
(see pic.2)
Pic.1 Installation with screws
Pic.2 Installation with adhesive
4
2. Connect the main plug of the 12V power supply to the hand
wave switch and then connect to the lights. (see Pic.3).
Pic.3: Connection
Note: Maximum allowed lights in one chain is 6 for 12W 12V
power supply and 12 for 24W 12V power supply
5
3.To turn all lights on/off simply wave your hand under the
sensor.
Hold your hand under the sensor for more than 1 sec to adjust
brightness of all lights from 10% to 100% level. When you turn
lights on/off, it will remember your last used brightness level.
The sensing distance is 6-8 cm from IR sensor.
If you prefer not to use hand wave switch, you can remove it and
use regular switch to turn it ON/OFF or change it to motion sensor
switch or rotary dimmer switch (available at our store).
6
4. To ensure better lighting, please clean the lights at regular
intervals.
Before you clean the LED lights ensure that the power is off.
Absolutely avoid when cleaning the lights wearing metallic or
conductive jewelry such as bracelets, necklaces, rings etc.
A soft dry cloth is recommended for cleaning.
Please do not install the LED lights close to heat sources or on
open fires.
5. With the 12W 12V DC power supply included in the kit, you can
use additional LED bars or puck light based on the information
below:
7" bar - 2W+/-10%
12" bar - 3W+/-10%
20" bar - 5W+/-10%
40" bar - 10W+/-10%
Puck light - 2W+/-10%
The power supply can handle MAX 12W load.
Power supply comes with the 4.9ft cord.
Connector specification: 3.5mm (Outer Diameter) x 1.35mm (Inner
Diameter).
IMPORTANT: Never overload power supply. Before purchase please
make sure you have 12V DC compatible LED bars.
7
6.EShine LED Lighting Kit comes with Limited 3-Year Warranty.
What does this limited warranty cover?
This Limited Warranty covers any defects in material or
workmanship under normal use during the Warranty Period.
What will we do to correct problems?
During the Warranty Period, we will repair or replace, at no
charge, products or parts of a product that proves defective
because of improper material or workmanship, under normal use
and maintenance.
How long does the coverage last?
The Warranty Period for this LED lighting kit is 3 year from the
date of purchase.
What does this limited warranty not cover?
This Limited Warranty does not cover any problem that is caused
by:
● conditions, malfunctions or damage not resulting from defects in
material or workmanship
What do you have to do?
To obtain warranty service, you must first contact us to determine
the problem and the most appropriate solution for you.
EShine®
Web: www.eshinestore.com
Absolutely avoid when cleaning the lights wearing metallic or
8
Gracias por elegir un producto de la marca EShine. Antes de
encender las luces lea este manual y guárdelo para su futuro uso.
Contenido del paquete:
· 6 x Luces LED
· 24 x Ganchos de Alambre
· 6 x 3M Cintas adhesivas de doble cara
· 14 x Tornillos
· 1 x Interruptor de sensor infrarrojos
· 1 x Fuente de Alimentación 12W 12V DC
Especificaciones técnicas
Dimensiones 60mm/2.36″x 8mm/0.32″(D/A)
Material Plástico y Aluminio
Tensión de funcionamiento 12V DC
Consumo de energía 6 x 2W, total 12W
Regulable Si, atenuación sin contacto
Temperatura de color Cálido (3000K) o Frío (6000K)
Vida útil > 30,000 hora
Ciclos de conmutación > 15,000
Flujo luminoso nomina 6 x 150lm, total 900lm
IRC >82
Ángulo 120 °
Protección IP20
Clase de protección III
Temperatura de funcionamiento -20 ° C hasta + 45 ° C
Precauciones
· Compruebe las luces LED con cuidado antes de su instalación.
· Asegúrese de que la alimentación esté apagada antes de
realizar el cableado y la instalación.
· Estos paneles LED deben operar con una tensión de 12V CC.
· Por favor no modifique la lámpara dentro del período de garantía
· Por favor use este producto solo para interiores.
· ¡Advertencia! Contiene piezas pequeñas. No para niños.
9
1.Use tornillos o cintas adhesivas de doble cara de 3M
para fijar las luces al lugar de instalación (vea la imagen 1).
Para usar los tornillos, debe quitar la cubierta superior de la luz,
desatornillando el anillo exterior de la pantalla de la lámpara y
quitar ésta. Luego pase dos tornillos a través de los orificios de los
tornillos y fije la lámpara al lugar de instalación (vea la imagen 1).
Puede colocar las luces y el interruptor del sensor de movimiento
de mano directamente en el lugar de instalación mediante el uso
de la cinta adhesiva de doble cara de 3M. (vea la imagen 2).
Imagen 1 Instalación con tornillos
Imagen 2 Instalación con adhesivo
10
2. Conecte el enchufe principal de la fuente de alimentación de
12V al interruptor de movimiento de mano y luego conéctelo a las
luces. (vea la imagen 3).
Imagen 3: Conexión
Nota: El Máximo de luces permitidas en una cadena para una
fuente de alimentación de 12W 12v es 6 y para una fuente de
alimentación de 24W 12v es 12.
Indice
Lingue:
Altri manuali Eshine Apparecchio di illuminazione
Manuali Apparecchio di illuminazione popolari di altre marche
Emos
Emos CLASSIC ZY1431T Manuale utente
Westinghouse
Westinghouse Outdoor Lighting Fixture Manuale utente
Hedler
Hedler C 12 silent Manuale utente
Blizzard Lighting
Blizzard Lighting Puck: CSI Manuale utente
Energetic Lighting
Energetic Lighting ELYSL-5004 Series Manuale utente
Lightmaxx
Lightmaxx Shaft 5R Manuale utente
Cooper Lighting
Cooper Lighting Halo L3232E Manuale utente
Stageline
Stageline ODW-2410RGBW Manuale utente
Light Sky
Light Sky Tornado Series Manuale utente
Lightolier
Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente
Lightolier
Lightolier Lytespan 83ED17S Manuale utente
Lightolier
Lightolier Calculite CS8226 Manuale utente