Eshine Single Panel with IR sensor Manuale utente

USER MANUAL

Single Panel with IR sensor (No Power

Supply)

30cm/11.8

Thank you for choosing a product of the brand EShine. Before

starting up the lights read through the instructions and store it for

future reference.

Packaging content:

· 1 x LED bar with IR sensor (this bar will act as a controller for the

chain if you add more LED bars without sensor )

· 1 x Connection cable

· 1 x Connector

· 2 x Wire Clips

· 1 x 3M double-sided sticker

· 2 x Screws

· 2 x Screw caps

Technical specifications

Dimensions (mm):

28.6x9.6x300 (WxHxL)

Material:

Plastic and Aluminum

Input Voltage:

100 –240V AC

Operating voltage:

12V DC

Power:

Dimmable:

Yes, touchless dimming

Color temperature:

Warm (3000K) or Cool (6000K)

Rated life:

> 25,000 hours

Switching cycles:

> 15,000

Nominal luminous flux:

230lm

Angle:

120°

Water and Dust Proofing Rating:

IP20

Protection class:

III

Operating temperature:

-20°C to + 45°C

Precautions

· Please check the lamp carefully before installing.

· Ensure the power is off before wiring and installing.

· This LED strips must be operated with 12V DC voltage.

· Please do not open the LED strips.

· Please do not retrofit the lamp within warranty period

· Please use this product for indoor only!

· Warning! The packaging contains small parts. Not for children.

· The LED under cabinet light is equipped with IR sensor a so-

called " Hand wave on/off ". The LED lights turn on/off by waving

your hand under IR sensor, which built in the middle.

Important tip before installing your lighting system

1. Use screws or 3M double-sided stickers to fasten lights to

the installation location (see Pic.1).

Pic.1 Installation with screws Pic.1a Installation with 3M

2. You can use connections cables or connectors to install

additional lights (see Pic.2, 3). If you use cables, wire clips

included for comfortable installation.

Pic.2 Connection cables Pic.3 Connectors

3. The main plug of the 12V power supply must be connected to

a specially marked side of LED strip with IR sensor.

This strip is labeled with the following note: "Connect power". On

the marked side, please connect the power cord (see Pic.4).

Pic.4: Connection of the power plug to the bar with IR sensor

Note: If you connect the power cord on the wrong side or wrong

led bar, which is not marked, NO IR sensor (“hand wave on/off”)

will be functional, but light can be operated with regular switch or

just plug/unplug adapter.

4. After connecting the power cord, to turn on the light wave your

hand under IR sensor. (see Pic.5)

The sensing distance is 6-8 cm from IR sensor.

Pic.5 On/Off function

IMPORTANT: Make sure there are no objects within 4 inches from

the sensor (wall, wood board, any supplies, cabinet lip etc). If you

install LED bar with the IR closer to the lip or wall, it will block the

sensor and LED bar will not operate properly.

5. Hold your hand under the sensor for more than 1 sec to adjust

brightness of all lights from 10% to 100% level. When you turn

lights on/off it will remember your last used brightness level.

Pic.6 Dimmable function

6. To ensure better lighting, please clean the lamp at regular

intervals.

Before you clean the LED lights ensure that the power is off.

Absolutely avoid when cleaning the lights wearing metallic or

conductive jewelry such as bracelets, necklaces, rings etc.

A soft dry cloth is recommended for cleaning.

Please do not install the LED lights close to heat sources or on

open fires.

7. With the 12W 12V DC power supply included in the kit, you can

use additional LED bars based on the information below:

7" bar - 2W+/-10%

12" bar - 3W+/-10%

20" bar - 5W+/-10%

40" bar - 10W+/-10%

Puck light - 2W+/-10%

The power supply can handle MAX 12W load.

Power supply comes with the 4.9ft cord.

Connector specification: 3.5mm (Outer Diameter) x 1.35mm (Inner

Diameter).

IMPORTANT: Never overload power supply. Before purchase

please make sure you have 12V DC compatible LED bars.

8.EShine LED Lighting Kit comes with Limited 3-Years Warranty.

What does this limited warranty cover?

This Limited Warranty covers any defects in material or

workmanship under normal use during the Warranty Period.

What will we do to correct problems?

During the Warranty Period, we will repair or replace, at no

charge, products or parts of a product that proves defective

because of improper material or workmanship, under normal use

and maintenance.

How long does the coverage last?

The Warranty Period for this LED lighting kit is 3 years from the

date of purchase.

What does this limited warranty not cover?

This Limited Warranty does not cover any problem that is caused

by:

● conditions, malfunctions or damage not resulting from defects in

material or workmanship

What do you have to do?

To obtain warranty service, you must first contact us to determine

the problem and the most appropriate solution for you.

EShine®

Web: www.eshinestore.com

Email: [email protected]

Gracias por elegir un producto de la marca EShine. Antes de

encender las luces lea las instrucciones y guárdelas para futuras

consultas.

Contenido del paquete:

· 1X luz LED con sensor IR (esta luz actúa como una unidad de

control para el resto de luces en la cadena)

· 1X Cables de Conexión

· 1X Conectores

· 2X Ganchos de Alambre

· 1X 3M Pegatinas adhesivas de doble cara

· 2X Tornillos

· 2X Tapones de rosca

Especificaciones técnicas

Dimensiones (mm):

28.6x9.6x300 (AxAxL)

Material:

Plástico y Aluminio

Voltaje de entrada:

100 - 240V AC

Tensión de uncionamiento:

12V CC

Potencia:

Regulable:

Si, atenuación sin contacto

Temperatura de color:

Cálido (3000K) or Frío (6000K)

Vida útil:

> 25,000 hora

Ciclos de conmutación:

> 15,000

Flujo luminoso nominal:

230lm

Ángulo:

120°

Grado de la impermeabilización del agua y del polvo: IP20

Clase de protección:

III

Temperatura de funcionamiento:

-20°C hasta + 45°C

Indice

Lingue:

Altri manuali Eshine Apparecchio di illuminazione

Eshine

Eshine ELP606DC Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente