ESS SYNTECH B-615 Manuale utente

Bravo Series

B-615 / B-615S / B-815

Version 1.0

User Manual

About this Manual

Thank you for purchasing Bravo Series Touch Terminal. This terminal offers highly enhanced

features, with easy connection to various optional devices for optimal performance. This user

manual describes how to setup and connect your terminal.

are distributed under licenses restricting their use, copying, and distribution. No part of this

documentation may be reproduced in any form by any means without prior written authorization of

the manufacturer and its licensors, if any.

Safety Information

Before you Proceed:

• Read the safety notices and the User Manual carefully before using the product.

• Keep the box and packaging in case the product needs to be shipped in the future.

• Follow the product and warning label instructions.

• Anychangesormodicationsthatdonotfollowtheinstructionsinthismanualwillvoidthis

product’s warranty.

Power Supply Safety Notes:

• To avoid electric shocks, disconnect the power cord from the electrical outlet before

relocating the system.

• Make sure the voltage of the power outlet conforms within voltage range of the terminal.

Failure to comply may cause the electric shock or damage to the terminal. If you are not

sure of the electricity voltage that you are using, consult your local electricity company.

• Toavoidreorelectricshocks,donotoverloadelectricpoweroutlets.

• Protect the power cord from being walked on or pinched particularly at plug, convenience

receptacles, and the point where they exit from the apparatus.

Operating Instructions

• Keep this manual for future reference.

• Keep this equipment from moisture and dust.

• Place the equipment on a stable surface before setting it up.

• Ifthereisanyofthefollowingsituationarise,notifyaqualiedservicetechnician

immediately:

◊The power cord or plug is damaged.

◊Liquid has been spilt on to the equipment.

◊The equipment has been dropped and damaged.

◊The equipment does not function normally.

• Do not block any ventilation openings to prevent the equipment from overheat.

• Do not leave the equipment in a non air-conditioned environment where the storage

temperature may go above 70°C (158°F), as this can cause damage to the equipment.

Maintenance

• Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.

• Do not apply pressure to the screen while cleaning.

• Do not spray any liquid directly onto the screen or the casing of the terminal.

• Chemical cleaners have been reported to cause damage on the screen of the terminal.

Warning and Attention

• Thetechnicaldescriptionsandspecicationsoftheequipmentaresubjecttochangewithout

notice.

• For safety reasons, wear gloves when assembling the product.

• Risk of explosion if battery is replaced by an incorrect type.

• Dispose of used batteries according to the instructions.

Patent

Patent pending.

CE Statement

• A Class III equipment with an enclosure made of HB material and using a non-special

connector for the a.c./d.c. input has to have a marking stating the following: “Use only

power supplies listed in the user instructions” or “For applicable power supplies see user

instructions”. This statement shall also be in the user-instructions.

• If product with laser module, the class of laser should be mentioned. The warning as

attachment.

Federal Communications (FCC Statement)

ThisdevicecomplieswithFCCRulesPart15.Operationissubjecttothefollowingtwoconditions:

• This device may not cause harmful interference.

• This device must accept any interference received including interference that may cause

undesirable operation.

This equipment has been tested and found to comply within the limit of a Class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the manufacturer’s instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by switching the equipment on and off, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the interference receiving antenna.

• Increase the distance of separation between the equipment and interference receiver.

• Connect the equipment to a power outlet on a circuit different from that to which the

interference receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning

The use of shielded cables for connection of the monitor to the graphics card is required to assure

compliancewithFCCregulations.Changesormodicationstothisunitnotexpresslyapprovedby

the party responsible for compliance could void the user’s authority to operate this equipment.

CB/LVD Statement

• A Class III equipment with an enclosure made of HB material and using a non-special

connector for the a.c./d.c. input has to have a marking stating the following: “Use only

power supplies listed in the user instructions” or “For applicable power supplies see user

instructions”. This statement shall also be in the user-instructions.

• If product with laser module, the class of laser should be mentioned. The warning as

attachment.

CCC Statement

此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰

采取切实可行的措施。

BSMI Statement

•接螢幕與顯示卡所使用的防磁纜線必須確實遵守FCC規範。未獲廠商明確同意而擅自變更或修

改本裝置，可能導致使用者的使用權限失效，而無法繼續操作本設備。

•警告使用者：這是甲類的資訊產品，在居住的環境中使用時，可能成射頻干擾，在這種情況

使用者會被要求採取某些適當的對策。

WEEE Notice

The WEEE logo (shown at the left) on the product or on its box indicates that this product must

not be disposed of or dumped with your other household waste. You are liable to dispose of

allyourelectronicorelectricalwasteequipmentbyrelocatingovertothespeciedcollection

point for recycling of such hazardous waste. Isolated collection and proper recovery of your

electronic and electrical waste equipment at the time of disposal will allow us to help conserving

natural resources. Moreover, proper recycling of the electronic and electrical waste equipment

will ensure safety of human health and environment. For more information about electronic and

electrical waste equipment disposal, recovery, and collection points, please contact your local

city center, household waste disposal service, shop from where you purchased the equipment, or

manufacturer of the equipment.

Contents

Chapter 1: Introduction............................................................ 8

Package Contents.................................................................................... 8

Overview of Bravo Series........................................................................ 9

Front View ...................................................................................................9

Rear View..................................................................................................10

Physical Dimensions .................................................................................11

Specications......................................................................................... 12

TouchTerminalSpecications ...................................................................12

PeripheralsSpecications .........................................................................14

Chapter 2: Preparing For the Installation............................. 17

System Default Settings........................................................................ 17

Main Board Jumpers and Connectors ................................................ 18

Signal Convergence Board Connector ................................................ 28

Power Switch Board Connector ........................................................... 29

Voltage Output Denition...................................................................... 30

Cash Drawer Controller Register ........................................................ 32

RS232 Control (B-615 / B-615S)...............................................................32

GPIO Control (B-615S / B-815).................................................................32

Calibrating the Touch Screen in Windows .......................................... 33

Setting the LCD Brightness Control .................................................... 35

Chapter 3: Hardware Installation .......................................... 40

Installing/Removing the Power Adapter .............................................. 40

Installing the Network Cable................................................................. 43

Installing/Removing the System Stand................................................ 44

Installing the Customer Display (Optional) ......................................... 46

Installing the Secondary LCD Display (Optional) ............................... 49

Installing the MSR Module (Optional) .................................................. 51

Installing the VESA Mount (Optional) .................................................. 53

Installing the Laser Scanner (Optional) ............................................... 55

Connecting to POS Peripherals............................................................ 56

Chapter 4: Maintenance Procedures .................................... 58

Replacing the System Core Engine ..................................................... 58

Replacing the Hard Disk Drive.............................................................. 60

Chapter 5: Frequently Asked Questions (FAQ) ................... 61

INTRODUCTION

Chapter 1

Introduction

Congratulations on your purchase of this Touch Terminal. Your easy-to-use POS terminal is

designedtohelpyouenhanceyourbusinessexibilitybyofferingsuperiorcustomerexperience.

Package Contents

Before setting up your Touch Terminal, check that the package contains the following items. If any

of the items is missing or damaged, contact your vendor immediately.

Touch Terminal 2nd LCD Customer Display

(optional) Customer Display (optional)

Laser Scanner (Optional) 2-in-1 Identication Reader Power Cable

Driver CD

INTRODUCTION

Overview of Bravo Series

Theguresinthissectionillustratethecomponents(includinginputandoutputports)locatedat

the front and rear of your Touch Terminal.

Front View

B-615

B-615S/B-815

USB

USBDK

COM6

VGAK/B

COM1

COM2COM4

LAN

USB

USBDK

COM1

VGAK/B

COM3

COM4COM5

LAN

USB

INTRODUCTION

Rear View

Without Stand With Stand

No. Description

1 VESA holes

2 MSR module compartment

3 Speakers

4 VESA routing plate

5 Control panel

a. 2*USB ports

b. Power button

c.Brightnesscontrolbuttons(forspecicmodels)

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Terminale touch popolari di altre marche

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuale utente

Ingenico

Ingenico AXIUM EX4000 Manuale utente

Heisei Electronics

Heisei Electronics Q-POS 815 Manuale utente

Amano

Amano MTX-15 Manuale utente

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuale utente

Demco

Demco SP7 Manuale utente

Lathem

Lathem PC600 Series Manuale utente

Partner

Partner MF-2352 Manuale utente

NCR

NCR RealPOS 7460-2 Manuale

Simrad

Simrad MS50 Istruzioni per il montaggio

Unitech

Unitech MR350 MKII Guida rapida

Jungheinrich

Jungheinrich WMT 210 Manuale utente

Motorola

Motorola MTP850 Manuale utente

YASKAWA

YASKAWA 62H-MDC0 Manuale utente

MVG industries

MVG industries NeptuLink Manuale utente

Price Industries Limited

Price Industries Limited FDC Manuale di istruzioni

Honeywell

Honeywell TemaKey Manuale utente

EBN

EBN BPC65-B-A16G Manuale utente