Essence WeR@Home Manuale utente
Quick Setup Guide
2
Quick Setup Guide
Legal Notice
Usage of this document, and all information (including product information) provided within, are
subject to the following terms and conditions, and all applicable laws. If you do not agree with
these terms, please do not access or use the remainder of this document.
This document contains highly confidential information, which is proprietary to Essence Security
International (E.S.I.) Ltd. and/or its affiliates (hereafter, “Essence”). No part of this document’s
contents may be used, copied, disclosed or conveyed to any third party in any manner whatsoever
without prior written permission from Essence.
The information included in this document is intended for your knowledge and for negotiation
purposes only. Essence makes no implicit representations or warranties with respect to such
information.
The information included in this document is subject to change without notice. Any decision
to rely on the information contained herein shall be at your sole responsibility, and Essence will
not accept any liability for your decision to use any information or for any damages resulting
therefrom.
Certain laws do not allow limitations on implied warranties or the exclusion or limitation of certain
damages. If these laws apply to you, some or all of the above disclaimers, exclusions, or limitations
may not apply to you.
By using the information contained herein, you agree that the laws of the State of Israel, without
regard to principles of conflict of laws, will govern any dispute of any sort that might arise between
you and Essence regarding the information contained herein, and any such dispute shall be settled
exclusively in the competent courts of Tel Aviv-Jaffa, Israel.
All registered or unregistered trademarks, product names, logos and other service marks
mentioned within this document are the property of Essence, or their respective owners. Nothing
contained herein shall be construed as conferring by implication, estoppels, or otherwise any
license or right, either express or implied, under any patent or trademark of Essence or any third
party. No use of any trademark may be made without the prior written authorization of Essence.
This document and all of its contents are protected intellectual property of Essence. Any copying,
reprinting, reuse, reproduction, adaptation, distribution or translation without the prior written
permission of Essence is prohibited.
Please check your End User License Agreement (EULA) for terms and conditions.
© 2015 All rights reserved to Essence Security International (E.S.I.) Ltd.
3
Quick Setup Guide
WeR@Home™ Home Monitoring and Management System
Quick Setup Guide
WeR@Home™ is a self-monitoring Smart Home solution that allows
you to control and manage your home with an easy, Do-It-Yourself
(DIY) installation, as described in this document. WeR@Home™ offers
complete peace of mind by enabling you to monitor and manage your
home from remote locations using mobile devices. With the Z-Wave®
Extender and Smart Rules, you will be able to fully automate your home
and enjoy an integrated Connected Home Experience.
This Quick Setup Guide describes the installation process and daily
usage of your WeR@Home™ System.
If you experience any problems with this process or need further
information, please go to: www.essence-grp.com/contact
NOTE: Internet access is required as part of this installation process.
Peace of Mind
24x7
4
Quick Setup Guide
Except as prohibited by local law, the manufacturer’s total liability in connection with this product is limited, in any event, to direct damages in an amount not exceeding the amount
you actually paid for the product. See your EULA for terms and Conditions. Please address any technical inquiries or complaints to the product’s local service provider.
5
Quick Setup Guide
Hub
(Panel)
Camera
(IPD)
Accessories
Remote Control
battery
Remote
Control Unit
Hub backup
battery
Siren
Ethernet
LAN Cable
Motion Detector Power
Supply
Door/Window
Sensor
Inspect Kit Contents, Materials and Tools
●Make sure you have a free LAN port for the Internet connection, such as a router with a
RJ-45 connector.
●Ten 1.5v, AA-size alkaline batteries for the peripheral devices.
●The 8-character serial number , found on labels in the battery compartment and on the
bottom of the base of the Hub.
●Please record the serial number here:
17
6
8
910
23
45
1
6
Quick Setup Guide
The WeR@Home™ Hub is the gateway between the
Internet and the WeR@Home™ peripheral devices,
installed in your home. The WeR@Home™ Hub enables the
automatic interaction between connected home devices.
Communications Requirements:
If your Service Provider supports GSM communications
and your Hub has the SIM-card option, you have a choice
of external communication channels.
Choose one of the following as your external
communications channel to the Internet:
●Home network - Requires an Ethernet LAN cable 7
●A Cellular Channel - Requires a SIM-card.
Essence recommends the Ethernet channel for its
reliability.
NOTE: If both the SIM-card and LAN cable are installed, the
cellular channel is used as backup.
Positioning:
The Hub should be installed on a flat surface in a central
home or office location with:
●Adequate cellular coverage, if cellular communication
is used.
●A flat surface near the router or LAN connection you
plan to use, if Internet communications is used.
The WeR@Home™ Hub
2
7
Quick Setup Guide
Hardware Installation:
1. Remove the back cover of the Hub,
2. Do one of the following, according to your choice of
external communications channel:
●Insert the SIM-card , if your HUB supports GSM
Communications.
●Attach an Ethernet LAN cable between the port on
the back of the Hub and a free socket in your Internet
modem or router.
NOTE: If you choose to install both the SIM-card and LAN
cable, the cellular channel is used as backup.
3. Insert the backup battery 10 over the SIM-card with
the contacts facing downwards and towards the base
and return the back cover of the Hub.
4. Plug a power cord into the mini-USB socket on the back of
the Hub and plug the cube into a power outlet. The Hub
LED lights up Red. The LED switches to Orange when the
Hub connects to the network.
5. Wait for the front panel LED to turn Green. It should
take about a minute.
The WeR@Home™ Hub
2.1
8
Quick Setup Guide
Prerequisite: Make sure you have a PC connected to the Internet, running
browser application software, such as Microsoft™ Internet Explorer® 8 or
higher or Google Chrome™.
1. Registration Step 1: Access the WeR@Home™ Web Application by entering
the Service Providers’ server address, using the web browser on your PC.
2. Click the button for the First Time Registration procedure.
3. Click the
Go to first time registration >>
option.
4. Enter the Hub’s 8-digit serial number. You can locate the serial number in
the Materials and Tools section. Click the button to continue. The
First Time Registration Step “2 of 2” window appears.
Login Window
Extension at Bottom of the Login Window
Hub First Time Registration Window
First Time Registration of the Hub using
the WeR@Home™ Web Application
3
9
Quick Setup Guide
First Time Registration Step 2 Window
5. Registration Step 2: Enter your personal details as registration information, as follows:
●Email - Enter the Email address to use during Login,
in standard email address format: ‘xxxx@yyyy.zzz’.
This is the email address to which you want the system
messages and notifications sent.
●Password - Enter a Password of at least 6 characters
(case-sensitive) to use during Login.
●Confirm Password - Re-enter the same Password from
the previous field.
●Name - Enter your name or the name with which to
identify the Hub (case-sensitive).
●Mobile# - Enter your mobile telephone number, in
International telephone number format.
●Country - Select your Country for the location where
you are installing the WeR@Home™ System.
●Time Zone - Select the Time-Zone for the Country you
selected in the previous field.
●Terms & Conditions - Check to accept Terms &
Conditions.
WeR@Home™ Web Application Home Page
6. Click the button. The WeR@Home™ Web Application Home Page appears.
10
Quick Setup Guide
Adding Users
If you want to add a user, perform the following procedure:
1. Log in to the WeR@Home™ Web Application.
2. Click the tab to access the Users module and click the button.
3. Enter the new user’s personal information in the New User - Properties pane.
Add New Users Page
3.1
Altri manuali per WeR@Home
3
Indice
Altri manuali Essence Sistema di sicurezza
Essence
Essence Care@Home Emergency Pendant Plus Manuale utente
Essence
Essence Care@Home C7000 Series Manuale utente
Essence
Essence Care Home Manuale utente
Essence
Essence We.R Manuale utente
Essence
Essence Care@Home VPD Manuale utente
Essence
Essence Care@Home C7000 Manuale utente
Essence
Essence CareHome ES700EPP Manuale utente
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente