Product label / GS1-128
The barcode label contain EAN number,
serial number and production date.
Warning labels and Symbols
Symbols used on the product, explained in more
detail:
Product identification
General
CE declaration
The product, and its related accessories, described in this instruction for use (IFU),
is in compliance with the regulation (EU) 2017/745 of 5. April 2017 – as a medical
device, risk class I.
The product has been tested and approved by a third party according to standards
IEC 60601-1, IEC 60601-1-2 and EN/ISO 10535:2006.
Any serious incident that occurs in relation to the device should be reported to
the manufacturer and the competent authority of the Member State in which the
user and/or patient is established.
Conditions for Use
Lift and transfer of a person will always pose a certain risk and only trained personnel are allowed to use
the equipment and accessories covered by this user manual.
Modifications and use of components made by other manufacturers.
We recommend only using Etac Molift components and spare parts. Declaration of conformity is not
valid and Etac is not responsible for warranty if any modifications are made to the product. Etac shall not
be liable for faults or accidents that can occur when using components made by other manufacturers.
Only certified personnel are allowed to open lifter or accessories to perform service
or repair. Risk of injury from rotating parts and electric shock.
The lifter shall not be operated by the person being lifted.
Warranty notice
Two-year warranty against defects in workmanship and materials of our products.
One-year warranty for batteries.
Please refer to www.etac.com for terms and conditions.
Type BF applied part Charging indicator
CE marked Double isolation symbol
Refer to user manual Manufacturer
Indoor Use only
Date of manufacture
Do not dispose in
general waste Catalogue number
Emergency lowering Serial number
Service indicator Medical Device
Battery indicator
6
Molift QuickRaiser 205 / www.etac.com
