Eteros Mobius M9 Manuale utente
M9 USER GUIDE
©2022 ETEROS TECHNOLOGIES INC. ALL RIGHTS RESERVED | MOBIUSTRIMMER.COM
TABLE OF
CONTENTS
4
5SAFETY INSTRUCTIONS
General Safety and Disclaimers
6SAFETY PRECAUTIONS
Safety Checklist
7
OPERATIONS
CLEANING MAINTENANCE
GET TO KNOW YOUR SORTER
SPECIFICATIONS
SPECIFICATIONS
Control Panel Overview & Machine Start up
Operating The Controls
Sorter Parts Identification
Preventative Maintenance
Machines Specs & Dimensions
8
12
13
14
15
16
WELCOME
Mobius M9 Sorter
SERVICES & REPAIRS
SETUP
ETEROS TECHNOLOGIES Contact List
Initial Assembly & Inspection
1.866.874.6244 | INFO@MOBIUSTRIMMER.COM | MOBIUSTRIMMER.COM
INTRO
This User Guide is a comprehensive manual covering the operation and maintenance of
the M9 Sorter machine as of the date of publication. ETEROS TECHNOLOGIES reserves the
right to make updates to the machine from time to time. In the event of an update, this
User Guide will remain appropriate for the safe operation and maintenance of your unit.
This User Guide, as well as any documentation supplied by component manufacturers,
are to be considered the information package associated with this device. Every operator
must read and understand the User Guide. The manual should be located within easy
access for periodic review.
WELCOME TO THE
MOBIUS M9 SORTER
5
DISCLAIMER
To ensure operator safety while in use, this device includes decaling, guarding, and other
safety features. Operators are encouraged to use caution and best judgment when using
equipment. Equipment should be serviced when required.
To avoid possible damage to the machine and risk of injury to the operator, consult with
an ETEROS TECHNOLOGIES representative to answer any questions.
All operators must read and understand this User Guide and be trained in safe opera-
tion and use of the M9 SORTER. We recommend the owner of this equipment develop
a standard operating procedure specific to each worksite to address any local hazards
or other conditions not outlined in this User Guide. The M9 SORTER must be inspected
regularly for damage, component failure, and wear. Results of inspection activity should
be documented.
ETEROS TECHNOLOGIES makes every effort to ensure the M9 SORTER is compliant with
all current safety standards. It is the responsibility of the owner to ensure all municipal,
provincial, state, county, territorial, and federal codes, regulations and standards have been
met in each working location.
Do not lend or rent your machine without providing the User Guide. A first-time operator
should receive practical instruction before using the machine.
This machine is not to be used for any purpose other than those expressly stated in the
User Guide, advertising literature, or other ETEROS TECHNOLOGIES written material
pertaining to the M9 SORTER.
ETEROS TECHNOLOGIES recognizes that the M9 Sorter is a purpose-built machine for
processing cannabis by licensed producers. Please check all municipal, provincial/state,
and federal laws and regulations before using the M9 Sorter. ETEROS TECHNOLOGIES
does not promote or condone the use of processing equipment in any way that may be
deemed illegal.
ETEROS TECHNOLOGIES recognizes that our equipment can be used for processing herbs,
hops, flowers and many other products. It is not the responsibility of ETEROS TECHNOLOGIES
to confirm alternative applications for our equipment.
SAFETY INSTRUCTIONS
6
SAFETY PRECAUTIONS
GENERAL
Safety Precaution Checklist
READ and become familiar with the entire User Guide. LEARN the equipment
applications, limitations, and possible hazards.
POWER DOWN AND DISCONNECT EQUIPMENT before washing, servicing
and when changing accessories.
CHECK FOR DAMAGED PARTS PRIOR TO OPERATION. The equipment should
be inspected prior to use to ensure proper operation in performing its intended
function. Check for alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions that may affect its
operation. Any damaged part including guards should be properly repaired
or replaced.
1
6
7
2
3
4
8
5
DO NOT USE THE DEVICE IN A DANGEROUS ENVIRONMENT or damp or wet
locations. Never expose the control panel directly to rain or water. Keep the
work area well illuminated.
DO NOT use the device in the presence of flammable liquids or gases.
KEEP WORK AREA CLEAN. Cluttered areas and workspaces invite accidents.
ALWAYS WEAR EYE PROTECTION.
WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may get caught in moving parts. Non-slip
footwear is recommended. Wear protective hair covering to contain long hair.
1.866.874.6244 | INFO@MOBIUSTRIMMER.COM | MOBIUSTRIMMER.COM
Repairs may only be carried out by Eteros Technologies or a designated authorized agent
(service technician).
Should the need arise, please notify us:
ETEROS TECHNOLOGIES
26 Industrial Ave. Carleton Place, Ontario, Canada K7C 3T2
www.eteros.com
1.866.874.6244
Improper interfacing, improper repair, or unauthorized modification could result in void
warranty claims.
SERVICES & REPAIRS
8
Initial Assembly & Inspection
Inspect the crate and crate contents to ensure no damage occurred during
shipping.
1
2
3
4
5
6
i
ii
iii
iv
v
vi
vii
Carefully remove M9 Sorter from crate.
Insert hopper Pins into Adjustment Blocks to lock hopper in position. The
blocks are mounted on the opposite side of their intended position for
shipping purposes.
Attach Shelf on the outfeed side of the Sorter by inserting holes on shelf onto
pins and pushing down on shelf to wedge in place.
Attach Slide-Outs by hooking them onto the edge of the Slide Out Table. This
will allow Slide-Outs to be adjustable.
Once initial assembly is complete, inspect the M9 Sorter to confirm that it is
ready to operate:
Confirm the power cord is in good condition.
Ensure the sorter belts are placed properly within pulley grooves.
Ensure rear tailgate is properly closed.
Ensure casters are in the locked position.
Attach Slide-Outs to desired distance for sorting into totes.
Ensure polycarbonate end covers are in place and safety sensors activated.
Place a tote under Slide-Outs and on the outfeed shelf to collect sorted
material.
INITIAL
SETUP
1.866.874.6244 | INFO@MOBIUSTRIMMER.COM | MOBIUSTRIMMER.COM
This support is to ensure no sagging while shipping in the inner plate
Inspect the crate and crate contents to ensure no damage occurred during
shipping.
1
2
3
4
Carefully remove M9 Sorter from crate.
The support will need to be removed on either end of the Sorter by removing
the hex bolts.
If the supports aren't removed, the operator will not be able to disassemble
the belts off for cleaning.
1.866.874.6244 | INFO@MOBIUSTRIMMER.COM | MOBIUSTRIMMER.COM
Remove and Install Belts and Rollers
Unplug the machine.1
2
3
4
5
Remove the overflow shelf and side panels.
Locate the belt tensioner on the infeed side of the M9.
Pull out the adjustment plunger and move the entire tension assembly up to
the maximum height. This will take the tension off the belts.
Move to the back side of the Sorter and open the tailgate by releasing the two
compression latches.
Indice
Altri manuali Eteros Attrezzature industriali
