EtherWAN 72128A Manuale utente

72128A, 72129A Hardened Managed Ethernet Switch

This quick installation guide describes how to install and use the 72128A and 72129A hardened Managed

Gigabit Ethernet Switch. This is the switch of choice for harsh environments constrained by space.

Physical Description

The Port Status LEDs and Power Inputs

LED State Indication

10/100Base-TX, 100Base-FX

Steady A valid network connection established.

Link/ACT Flashing Transmitting or receiving data.

ACT stands forACTIVITY.

Steady Communication speed is 100Mbps.

10/100 Off Communication speed is 10Mbps.

10/100/1000Base-TX, 1000Base-SX/LX

Steady A valid network connection established.

Link/ACT

Flashing Transmitting or receiving data.

ACT stands forACTIVITY.

Steady Communication speed is 1000Mbps.

1000 Off Communication speed is 10/100Mbps.

Power Input Assignment

＋24VDC

Power

－Power

Ground

Earth Ground

Terminal

Block

Functional Description

•Meets NEMA TS1/TS2 Environmental requirements such as temperature, shock, and vibration for

traffic control equipment.

•Meets EN61000-6-2 EMC Generic Standard Immunity for industrial environment.

•Manageable via SNMP, Web-based, Telnet, and RS-232 console port.

•Support 802.3/802.3u/802.3ab/802.3z/802.3x. Auto-negotiation: 10/100/1000Mbps, full/half-duplex;

Auto MDI/MDIX.

•1000BaseSX/LX: Multi mode or Single mode SC type; WDM Single mode SC type.

•Support 8192 MAC addresses. Provides 256K Bytes memory buffer.

•Operating voltage and Max. current consumption: 0.625A @ 24VDC. Power consumption: 15W

Max.

•Power Supply: DC Terminal Block power input.

•-40 to 75 (℃℃-40℉to 167℉) operating temperature range.

Tested for functional operation @ -40 to℃85 (℃-40℉to 185℉).

•Supports Din-Rail, Panel, or Rack Mounting installation.

Console Configuration

•Connect to the switch console:

Connect the DB9 null-modem or cross over cable to the RS-232 serial port of the device and the

RS-232 serial port of the terminal or computer running the terminal emulation application. Direct

access to the administration console is achieved by directly connecting a terminal or a PC equipped

with a terminal-emulation program (such as HyperTerminal) to the switch console port.

•Configuration settings of the terminal-emulation program:

Baud rate: 115,200bps

Data bits: 8

Parity: none

Stop bit: 1

Flow control: none.

•Press the “Enter” key. The Command Line Interface (CLI) screen should appear as below:

•Logon to Exec Mode (View Mode):

At the “switch_a login:”prompt just type in “root” and press <Enter> to logon to Exec Mode (or View

Mode). And the “switch_a>” prompt will show on the screen.

1 V2

72128A, 72129A Hardened Managed Ethernet Switch

•Logon to Privileged Exec Mode (Enable Mode):

At the “switch_a>” prompt just type in “enable” and press <Enter> to logon to Privileged Exec Mode

(or Enable Mode). And the “switch_a#” prompt will show on the screen.

•Logon to Configure Mode (Configure Terminal Mode):

At the “switch_a#” prompt just type in “configure terminal” and press <Enter> to logon to Configure

Mode (or Configure Terminal Mode). And the “switch_a(config)#” prompt will show on the screen.

Web Configuration

•Login the switch:

Specify the default IP address (169.254.1.1) of the switch in the web browser.A login window will be

shown as below:

•Enter the factory default login ID: root.

Enter the factory default password (no password).

Then click on the “Login” button to log on to the switch.

2 V2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EtherWAN Router di rete

EtherWAN

EtherWAN EX42300 series Manuale utente

EtherWAN

EtherWAN EX35000 series Manuale utente

EtherWAN

EtherWAN EX41922-T Manuale utente

EtherWAN

EtherWAN EX42011 Manuale utente

EtherWAN

EtherWAN EX26262 Manuale di programmazione

EtherWAN

EtherWAN EX49122A-05T Manuale utente

EtherWAN

EtherWAN EX42200 Manuale utente

EtherWAN

EtherWAN InfraGreEn IG5 Manuale utente

EtherWAN

EtherWAN EX34000 Manuale utente

EtherWAN

EtherWAN EX46000 Manuale utente

EtherWAN

EtherWAN EX17008 Manuale utente

EtherWAN

EtherWAN C4G-S-1P3M Istruzioni per l'installazione

EtherWAN

EtherWAN EX42017-XY Manuale utente

EtherWAN

EtherWAN EX94000 Manuale utente

EtherWAN

EtherWAN 5-Port and 8-Port Pocket Size Fast Ethernet... Manuale utente

EtherWAN

EtherWAN EX16916 Manuale utente

EtherWAN

EtherWAN EX38000A Manuale utente

EtherWAN

EtherWAN EX47026-10B Manuale utente

EtherWAN

EtherWAN EX49000 Manuale utente

EtherWAN

EtherWAN C4G-M-4P6M Istruzioni per l'installazione

EtherWAN

EtherWAN EX17008 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza