EtherWAN EX49000 Manuale utente

EX49000 HardenedWeb-SmartPoEEthernetSwitch www.etherwan.com

This quick start guide describes how to install and use the Hardened Web-Smart PoE (Power over

Ethernet) Ethernet Switch. Port and LED number will vary on different models. This user's manual will

only use EX49162 to cover all models.

Physical Description

The Port Status LEDs and Power Inputs

LED State Indication

Steady Power on.

Power1

Power2 Off Power off.

Steady Power redundant system failure occurred.

Fault Off Power redundant system failure is not occurred.

10/100Base-TX

Steady A valid network connection established.

Link/ACT Flashing Transmitting or receiving data.

ACT stands forACTIVITY.

Steady Valid port connection at 100Mbps.

10/100 Off Valid port connection at 10Mbps.

Steady Powered device (PD) is connected.

PoE Off Powered device (PD) is disconnected.

LED State Indication

Gigabit Ethernet

Steady A valid network connection established.

Link/ACT Flashing Transmitting or receiving data.

ACT stands forACTIVITY.

Steady A valid TX connection established.

TX Off No valid TX connection established.

Steady A valid SFP connection established.

SFP Off No valid SFP connection established.

DC Terminal Block Power Inputs: There are two pairs of power inputs can be used to power up this switch.

Redundant power supplies function is supported.

Power Input Assignment

＋47-57VDC

Power2 －Power Ground

＋47-57VDC

Power1 －Power Ground

Earth Ground

Terminal Block

Relay Output Rating 1A @ 24VDC

The 10/100Base-TX (PoE) and Gigabit Ethernet Connectors

The 10/100Base-TX (PoE) Connections

The following lists the pinouts of 10/100Base-TX ports.

Pin Signal Name Signal Definition

1 TD＋Output Transmit Data ＋

2 TD－Output Transmit Data －

3 RD＋Input Receive Data ＋

4 PoE Positive (VCC＋)

5 PoE Positive (VCC＋)

6 RD－Input Receive Data －

7 PoE Negative (VCC－)

8 PoE Negative (VCC－)

70G-EX49000Q1

EX49000 HardenedWeb-SmartPoEEthernetSwitch www.etherwan.com

2 70G-EX49000Q1

Login the switch:

Specify the default IP address (192.168.1.10) of the switch in the web browser. A login window will be

shown as below:

Enter the factory default user name: admin. Enter the factory default password: admin.

Then click on the “OK” button to log on to the switch.

Web Configuration

Meets NEMA TS2 Environmental requirements such as temperature, shock, and vibration for

traffic control equipment.

The 1000Base-T Connections

The following lists the pinouts of 1000Base-T ports.

Pin Signal Name Signal Definition

1 TP0＋Transmit and Receive Data 0 ＋

2 TP0－Transmit and Receive Data 0 －

3 TP1＋Transmit and Receive Data 1 ＋

4 TP2＋Transmit and Receive Data 2 ＋

5 TP2－Transmit and Receive Data 2 －

6 TP1－Transmit and Receive Data 1 －

7 TP3＋Transmit and Receive Data 3 ＋

8 TP3－Transmit and Receive Data 3 －

The SFP Socket Connections

The SFP socket for Gigabit fiber optic expansion.

The 1000Base-SX/LX Connections

The fiber port pinouts

The Tx (transmit) port of device I is connected to the Rx (receive) port of device II,

and the Rx (receive) port of device I to the Tx (transmit) port of device II.

The WDM 1000Base-BX Connections

The fiber port pinouts

Only one optical fiber is required to transmit and receive data.

Meets EN61000-6-2 & EN61000-6-4 EMC Generic Standard Immunity for industrial environment.

1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex. Auto-Negotiation, Auto-MDI/MDIX.

Supports IEEE802.3at Power over Ethernet (PoE) Power Sourcing Equipment (PSE).

Device power consumption: 15W Max. (without PoE). PoE power budget: 480W Max.

Supports 4096 MAC addresses. Provides 2.25M bits memory buffer.

Power Supply: Redundant 55VDC Terminal Block power inputs.

Up to Max. 16 IEEE802.3at compliant PoE PSE (30W) ports.

-40 to 75 (℃℃-40℉to 167℉) operating temperature range.

Alarms for power and port link failure by relay output.

Manageable via Web browser interface.

Functional Description

Supports Rack Mounting installation.

2 Gigabit SFP combo ports.

Indice

Altri manuali EtherWAN Router di rete

EtherWAN

EtherWAN 72128A Manuale utente

EtherWAN

EtherWAN EX46000 Manuale utente

EtherWAN

EtherWAN EX35000 series Manuale utente

EtherWAN

EtherWAN C4G-M-4P6M Istruzioni per l'installazione

EtherWAN

EtherWAN EX49122A-05T Manuale utente

EtherWAN

EtherWAN EX17008 Manuale utente

EtherWAN

EtherWAN EX94000 Manuale utente

EtherWAN

EtherWAN C4G-S-1P3M Istruzioni per l'installazione

EtherWAN

EtherWAN EX26262 Manuale di programmazione

EtherWAN

EtherWAN InfraGreEn IG5 Manuale utente

EtherWAN

EtherWAN EX41922-T Manuale utente

EtherWAN

EtherWAN EX47026-10B Manuale utente

EtherWAN

EtherWAN EX42011 Manuale utente

EtherWAN

EtherWAN EX17008 Manuale utente

EtherWAN

EtherWAN EX42300 series Manuale utente

EtherWAN

EtherWAN EX38000A Manuale utente

EtherWAN

EtherWAN EX42017-XY Manuale utente

EtherWAN

EtherWAN EX16916 Manuale utente

EtherWAN

EtherWAN EX34000 Manuale utente

EtherWAN

EtherWAN 5-Port and 8-Port Pocket Size Fast Ethernet... Manuale utente

EtherWAN

EtherWAN EX42200 Manuale utente

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza