eufy Security T8210 Manuale utente
Anker Innovations Limited. All rights reserved. eufy Security and eufy
Security Logo are trademarks of Anker Innovations Limited, registered in the
United States and other countries. All other trademarks are the property of
their respective owners.
51005002735 V04
QUICK
START GUIDE
Video Doorbell 2K (Battery-Powered) Set
English 01
English 01
Deutsch 30
Nederlands 58
Français 86
Italiano 96
Español 106
Português 106
116
TABLE OF
CONTENTS
What’s Included 02
Product Overview 04
How The System Works 06
Connecting The Homebase 07
Setting Up The System
08
Determining The Power Option 09
Finding A Mounting Spot 11
13 Mounting The Bracket
16 Mounting The Doorbell
17 Detaching The Doorbell
18 Recharging The Doorbell
19
Powering The Doorbell With Existing
Doorbell Wires
27 Notice
02 English English 03
WHAT’S INCLUDED
For Video Doorbell Installation
QSG
Video Doorbell 2K
(Battery Powered)
Model: T8210
Screw Packs (Spare
screws and anchors are
included)
Quick Start Guide
Screw Hole Positioning
Card
Doorbell Detaching
Pin
15° Mounting Wedge
(Optional)
Mounting Bracket
Extension Wires and
Wire Nuts (Optional)
FCC ID: 2AOKB-T8210
IC: 23451-T8210
USB Charging
Cable
For Wi-Fi Doorbell Chime Installation
Note: Power plug may vary in different regions.
Model: T8020 Power Plug
FCC ID: 2AOKB-T8020
IC: 23451-T8020
QSG
04 English English 05
PRODUCT OVERVIEW
Video Doorbell 2K (Battery Powered)
Front view:
1
3
5
7
2
4
6
1. Motion Sensor
2. Microphone
3. Camera Lens
4. Ambient Light Sensor
5. LED Ring
6. Doorbell Button
7. Speaker
Rear View:
1
2
3
4
1. Micro USB Charging Port
2. SYNC/RESET Button
3. Power Terminals for Existing
Doorbell Wire (Optional)
4. Detaching Mechanism
Operation How-to
Power on Press and release the SYNC button
Add doorbell to HomeBase Press and hold the SYNC button until you hear a beep
Power off the doorbell Quick-press the SYNC button 5 times in 3 seconds.
Reset the doorbell Press and hold the SYNC button for 10 seconds.
HOW THE SYSTEM WORKS
How the System Works
The video doorbell system includes 2 parts. One is the video doorbell at your door.
The other is the Doorbell Chime in your house.
The video doorbell detects motion at your porch and allows you to answer the door
anytime and anywhere. The Doorbell Chime stores video clips on its built-in storage.
Doorbell Chime
Video Doorbell
06 English English 07
STEP 1 POWERING ON THE WI-FI
DOORBELL CHIME
Connect the Wi-Fi Doorbell Chime to the Internet
1. Fix the power connector toWi-Fi Doorbell Chime.
①Place the power connector over Wi-Fi Doorbell Chime in the direction the
arrows indicate.
②Align the raised slots of the power connector with the notch on the base of
the doorbell chime.
③Rotate clockwise to lock the power connector in place.
12 3
2. Extend Wi-Fi Doorbell Chime’s antennas.
3. Plug Wi-Fi Doorbell Chime into an AC power supply at your desired location.The
LED indicator turns solid green when the doorbell chime is ready for setup.
08 English English 09
STEP 2 SETTING UP THE SYSTEM
Download the App and Set up the System
Download the Eufy Security app from the App Store (iOS devices) or Google Play
(Android devices).
Sign up for a Eufy Security account, then follow the onscreen instructions to
complete the setup.
STEP 3 DETERMINING THE POWER
OPTION
Option 1 - Battery Powered
1. If you don’t have existing doorbell wiring at the front door, use the built-in
battery. You are free to determine the doorbell position and the mounting is easy
and quick.
2. When the doorbell battery level is low, you need to detach and charge it.
3. If you choose this option, please jump to STEP 4 FINDING A MOUNTING
SPOT.
6 months
Note: The battery life varies depending on usage. In most common cases, a
doorbell may have up to 10 events per day and each recording lasts 20 seconds on
average. Under this scenario, the doorbell battery life can last up to 6 months.
10 English English 11
Option 2 - Doorbell Wire Powered
1. If you have existing and working doorbell wiring at the front door, the doorbell
will be powered by the wires constantly. So you don’t need to detach and charge
it after installation.
2. Since the doorbell is connected to the wires, the mounting position is limited.
3. If you choose this option, please jump to Appendix 3 Powering the Doorbell
with Doorbell Wires.
8 - 24V AC Doorbell Wiring
STEP 4 FINDING A MOUNTING SPOT
Find a Mounting Spot
Take the video doorbell to your front door and check the live view on the App at
Consider the below factors:
1. Check if you can reuse the existing holes and anchors on the wall or door frame.
2. If you want to place the doorbell close to a side wall, make sure the wall doesn’t
will become blurry.
3.
mounting height is 48" / 1.2 m from the ground.
4. Use the 15° mounting wedge as a supplementary mounting bracket if you wish to
1.76m(5’9”)
1.2m (48")
0.3m
(12")
1m
(40")
15°
Without 15° Mounting wedge With 15° Mounting wedge
Door Door
Video Doorbell Video Doorbell
12 English English 13
Place the Screw Hole Positioning Card against the wall to mark the position. STEP 5 MOUNTING THE BRACKET
Mount the Doorbell on a Wooden Surface
If you’re mounting the doorbell on a wooden surface, you don’t need to pre-drill
pilot holes. Use the provided screws to secure the Mounting Bracket on the wall,
The Screw Hole Positioning Card indicates the position of the screw holes.
What is required: Screwdriver, Mounting Bracket, 15° Mounting Wedge (Optional),
Screw Packs
Phillips-Head Screwdriver
(not provided)
Wall Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.)
Without 15° Mounting Wedge With 15° Mounting Wedge
1
14 English English 15
Mount the Doorbell on Surfaces Made Out of Hard
Materials
1. If you’re mounting the doorbell on a surface made out of hard materials, like
brick, concrete, stucco, drill 2 holes through the Screw Hole Positioning Card
with a 15/64”(6mm) drill bit.
2. Insert the provided anchors, and then use the provided long screws to secure the
Mounting Bracket on the wall.
What is required: Power Drill, 15/64”(6 mm) Drill Bit, Mounting Bracket, 15°
Mounting Wedge (Optional), Screw Packs
Power Drill
(not provided) 15/64”(6 mm) Drill Bit
Mounting Bracket
(Attached to 15° Mounting
Wedge)
15° Mounting
Wedge (Optional)
Screw Packs (Spare screws
and anchors are included.) 2 2
Wall Wall
Mounting
Bracket
Mounting
Wedge
Mounting
Bracket
Without 15° Mounting Wedge With 15° Mounting Wedge
16 English English 17
STEP 6 MOUNTING THE DOORBELL
Mount the Doorbell
Align the doorbell on top and then snap it on the bottom. Press it down until it clicks
into place.
You’re all set!
If you want to detach the doorbell or recharge it, please refer to the following
sections.
APPENDIX 1 DETACHING THE DOORBELL
Detach the Doorbell
1. Use the doorbell detaching pin provided if you wish to detach the doorbell from
the Mounting Bracket.
2. Press and hold the hole on the bottom of the doorbell and then lift its bottom to
take it off.
What is required: Doorbell Detaching Pin
Doorbell
Detaching Pin
Indice
Altri manuali eufy Security Accessori
eufy Security
eufy Security T8213 Manuale utente
eufy Security
eufy Security HomeBase 2 Manuale utente
eufy Security
eufy Security T8740 Manuale utente
eufy Security
eufy Security T8900 Manuale utente
eufy Security
eufy Security T8221 Manuale utente
eufy Security
eufy Security T8900 Manuale utente
eufy Security
eufy Security 2K Manuale utente
eufy Security
eufy Security T8200 Manuale utente
eufy Security
eufy Security T8222 Manuale utente
eufy Security
eufy Security T8910 Manuale utente
