EUROPRO COMPACT-PRO 60 Manuale utente

USER MANUAL

COMPACT-PRO 60 & 80

EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET

Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36

SAS au capital de 400 000€ - SIREN 394 961 510 – NAF 2892 Z

Edition of 05/02/2019

User manual - COMPACT-PRO 60 & 80 201902-340-ENGP2

201902-340-ENG User manual - COMPACT-PRO 60 & 80 P3

SUMMARY

1. INTRODUCTION...........................................................p. 4

2. USER MANUAL ...........................................................p. 5

2.1. Importance of the manual .................................................p. 5

2.2. Receivers of the manual ..................................................p. 5

3. WARNING.................................................................p. 6

3.1. Safety ...................................................................p. 6

3.2. Transport ................................................................p. 9

3.3. End-of-life of the product ..................................................p. 9

4. YOUR MACHINE ..........................................................p. 9

4.1. Description ..............................................................p. 9

4.2. Technical characteristics ..................................................p. 9

4.3. Identication of the components ...........................................p.10

5. USE OF THE MACHINE....................................................p.13

5.1. Machine prerequisites ....................................................p.13

5.2. Machine starting up.......................................................p.14

5.3. High pressure washer prerequisites ........................................p.15

5.4. High pressure washer starting up ..........................................p.16

5.5. Water doser..............................................................p.17

6. MAINTENANCE ...........................................................p.18

7. FAILURES AND REMEDIES................................................p.19

8. SAFETY CARD RUNNING .................................................p.22

9. DECLARATION OF CONFORMITY .........................................p.33

10. WARRANTY .............................................................p.34

10.1. Warranty conditions .....................................................p.34

10.2. Warranty certicate ......................................................p.35

User manual - COMPACT-PRO 60 & 80 201902-340-ENGP4

1. INTRODUCTION

You just acquired a COMPACT-PRO spraying machine and all the team of Europe Projection thanks

you for the condence you have granted us.

Manufacturer of professional equipments for paint and llers, we have put our know-how for 20 years

at the service of the users of our machines.

Our technical and commercial team is at your disposal for any further information you may need about

the machine you just acquired.

EUROPE PROJECTION

228, avenue Olivier Perroy 13790 ROUSSET

Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36

SAS au capital de 400 000€ - SIREN 394 961 510 – NAF 2892 Z

201902-340-ENG User manual - COMPACT-PRO 60 & 80 P5

2. USER MANUAL

2.1. IMPORTANCE OF THE MANUAL

This manual is a key part for the use of your machine. It summarizes the procedures of starting-up,

cleaning and maintenance of the device and also the safety instructions you need to observe.

Read carefully all the working and safety instructions and the warnings included in this manual before

starting your machine.

Most of the accidents are caused by the non-compliance of the safety standards and rules.

This manual must be kept near the machine, within reach of the user and held in good condition until

the nal destruction of the machine.

In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on

page 4 for a copy at any moment.

2.2. RECEIVERS OF THE MANUAL

This manual is intended to any staff which will manipulate the machine :

- people in charge of the transport of the machine

- people in charge of the use of the machine

- people in charge of the cleaning and maintenance of the machine

- people in charge of the nal destruction of the machine

User manual - COMPACT-PRO 60 & 80 201902-340-ENGP6

3. WARNING

3.1. SAFETY

Using the machine in an incorrect way or in non-compliance of the safety instructions

indicated in this manual can cause death or serious injuries.

Read carefully all the working and safety instructions and the warnings contained in this

manual before starting your machine.

• Respect all the safety standards before running the equipment.

• Use the equipment only for the applications specied in the manual.

• Always remain alert when using the equipment.

• Transport the machine using the handles or the appropriate grips.

• During the breaks, turn the machine off.

• Run the equipment to its nominal voltage.

• Let at least 50 cm of free space between the equipment and any obstacle so that the air

ow is not blocked.

• Know how to quickly stop the equipment in case of necessity.

• Never use the equipment while it is running abnormally or it is defective.

• Do not direct a water jet or ammable liquid on the machine.

• Never direct an air jet or product jet on a person or an animal.

• Do not touch warm surfaces of the equipment.

• Always wear adequate body protections (glasses, gloves, overall and mask) and pay

attention to long hair.

• Never touch moving parts.

• Do not insert any object or the hands inside the protection grids to avoid any accident or

damage to the machine.

• For any outside job, only use appropriate extension cords.

• Maintain the equipment carefully and clean it properly after every use.

• Disconnect the equipment before any intervention.

• Avoid absolutely to unscrew any connection while the machine is under pressure.

• Check the damaged parts.

• Do not clean the plastic parts with solvant.

• In case of needed After-Sale Service, always specify the machine model and its serial

number.

• For any replacement of parts, only use genuine parts.

• Do not modify the machine.

• Do not cut or dismantle the protection grids.

• Do not open the electric box.

201902-340-ENG User manual - COMPACT-PRO 60 & 80 P7

3. WARNING (continued)

3.1. SAFETY (continued)

WORKSPACE

• Maintain the workspace clean and clear.

• Ambient operating temperature must be from 5°C and 35°C.

• Do not use the equipment in a potentially explosive area.

• Do not place any potentially inammable objects in close proximity to the machine.

• Take away every not qualied person from the working area of the machine, as well as children

and animals.

• In case of installation of the machine on scaffolding or a plan above ground level, attach the machine

to avoid any fall while operating.

• Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.

HOSES

• Always use hoses and connections adapted to the used product (genuine parts), do not try to x it.

• Do not walk on the hoses, do not bend them.

• Do not use the hoses to pull the machine.

STORAGE

• Keep the equipment in a clean and clear area in which the temperature does not exceed +35°C.

• After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it

blocking up. The storage of a not greased pump can damage it seriously.

IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL

MODIFICATION WITHOUT ADVANCED NOTICE.

User manual - COMPACT-PRO 60 & 80 201902-340-ENGP8

3. WARNING (continued)

3.1. SAFETY (continued)

SAFETY SYSTEMS

This machine has been designed to allow working with the maximum safety.

So safety sensors and emergency stop has been setted on your machine without complicating your

work.

We are insisting on your caring to maintain them in good condition and above all not to remove them.

In case of malfunction, please contact immediately your dealer.

HYDRAULIC

This machine is equipped with high pressure hydraulic circuits (200 bar).

The following insctructions are essential for your safety:

• Never tighten a hydraulic connection while the machine is working.

• Never try to wipe an oil drop on a hose or hydraulic component with your nger while the machine

is working.

• Take care of the good condition of the plumbing (a damaged or blistered rubber must be changed

immediately).

• Check regularly if the circuit does not have any leak.

• In any case, do not touch hydraulic parts (even when the machine is not working) because the

components shall be hot and there is a burn risk.

SAFETIES AND PROHIBITIONS

• The mixer grid rising up causes the mixer movement stop.

• The hopper grid rising up causes the screw movement stop.

• Stop of the projection stops compressed air consumption and pump rotation.

• As soon as the work is recovered, air release allows the pump restart.

• Emergency stop is located on the machine hood. Do not hesitate to use it if needed, this will

immediately stop the motor.

• To restart the machine after emergency stop button pushed, follow this procedure:

- Put the command handles in central position.

- Rearm emergency stop.

- Command panel lamps must be lighted-up.

- Engage the starter with the contact key.

- Resume projection procedure.

201902-340-ENG User manual - COMPACT-PRO 60 & 80 P9

3. WARNING (continued)

3.2. TRANSPORT

Article R. 80 of the trafc rules:

Only are exempted from the obligation of brakes the only trailers under the double condition

that their total weight authorized in load does not exceed 750 kg nor half of the pure weight

of the truck tractor.

• This machine was the object of a road homolagation (n°e2*2007/46/0673). As such, she must be

registered and can be thus dragged normally on the road network.

• The adjustable stand in height easily allows you to x the helm to the harness of your vehicle.

• The adjustable helm in height gives you the possibility of adjusting the machine horizontally.

• An electric cable provided with a grip allows you to link the device of lighting of the trailer with the

tractor truck.

• A cable of break allows to bind the device of harness of your vehicle with the machine in case of

hanging problem of the helm during a travel.

It is imperative to collide this cable on the harness of the vehicle.

Compact-Pro 60 & 80 are not a trailers intended for transport. It is formally forbidden

to transport people, ller...

Before every road travel:

• Check the pressure of the pneumatics which has to be 2.8 bar max.

• Check the tightening of the nuts of wheels.

• Check the tightening of the nuts of the articulated helm and the presence of pins.

• Clean reectors.

• Clean and check the functioning of the device of lighting.

• Collide the cable of break.

3.3. END OF LIFE OF THE PRODUCT

At its end-of-life, the machine must not be eliminated with the other household waste. The

uncontrolled elimination of waste can harm the environment or human health. Individuals are

invited to contact the distributor which sold them the product or to inquire with their city hall

to know where and how to get rid of the product so it can be recycled while respecting the

environment.

For any further information, contact our hotline +33 4 42 29 08 96 or conseil@euromair.com.

User manual - COMPACT-PRO 60 & 80 201902-340-ENGP10

4. YOUR MACHINE

4.1. DESCRIPTION

Compact-Pro 60 & 80 are equipped with diesel engine with cooling liquid which pulls a double pump

with gearings which supplies the hydraulic ows necessary for the equipment.

The compressor of 400 L/min, 4 bar, is positioned on a deck allowing an easy regulation of the tension

of the belt of training.

The trainings in rotation screw and mixer are realized by two engines of orbital type and the hydraulic

distribution by industrial components of which the commands are manual.

Components were selected according to strict quality criteria.

The safeties are in accordance with existing standards and hydraulic systems are protected against the

possible blockings of elements in rotation. A cooling tower insures the temperature preservation of oil

in the suitable range of use.

4.2. TECHNICAL CHARACTERISTICS

COMPACT-PRO 60 COMPACT-PRO 80

Sound level Lwa 101 dB

Motorization

3 cylinders Kohler motor with

cooling liquid LDW 1003 used at

2500 rpm.

4 cylinders Kohler motor with

cooling liquid LDW 1404 used at

2500 rpm.

Electric starting up 12V battery - 50Ah - 400A

Air lter cartridge

Diesel reservoir capacity 25 L

Hydraulic reservoir capacity 28 L

Screw pressure 200 bar

Mixer pressure 150 bar

Cleaner pressure 150 bar

Lifting jack 60 bar

Mixer

200 L capacity

hydraulic drive with 2 rotation directions

mixer-stop safety at grid opening

Load height: 87 cm

Hopper

hydraulic drive with 2 rotation directions

screw-stop safety at grid opening

draining plug for cleaning

Centralized control panel includes

motor control panel

start of the various features (pump, mixer, lift)

set-up of the pump and mixer speed

set-up of the heat motor speed

Compressor with pistons, set-up on 4 bar

Compressor ow-rate 400 L/min

Screw pump

standard: from 0 to 60 L/min max

at 40 bar max

optional: up to 10 m3/h

standard: from 0 to 80 L/min max

at 40 bar max

optional: up to 12 m3/h

High pressure washer 11 L/min at 140 bar

Weight 720 kg (reservoir full of diesel, level of oil

made)

735 kg (reservoir full of diesel, level of oil

made)

Altri manuali per COMPACT-PRO 60

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EUROPRO Spruzzatore di vernice

EUROPRO

EUROPRO 4P Manuale utente

EUROPRO

EUROPRO Compact-Pro 70 Manuale utente

EUROPRO

EUROPRO AC-50-G Manuale utente

EUROPRO

EUROPRO MINIJET 80 Manuale utente

EUROPRO

EUROPRO EUROPROPULVE V5 Manuale utente

EUROPRO

EUROPRO Mini-Sandblaster 10L Manuale utente

EUROPRO

EUROPRO EUROHVT1 Manuale utente

EUROPRO

EUROPRO Compact-Pro Joint 10 Manuale utente

EUROPRO

EUROPRO Compact-Pro 55 Manuale utente

EUROPRO

EUROPRO JETPRO 80 Manuale utente

EUROPRO

EUROPRO Compact-Pro 120 Manuale utente

EUROPRO

EUROPRO Eurospray S Manuale utente

EUROPRO

EUROPRO Compact-Pro Joint 20 Manuale utente

EUROPRO

EUROPRO JETPRO 100-7 Manuale utente

EUROPRO

EUROPRO DropPro 30P Manuale utente

EUROPRO

EUROPRO MIXPRO 14 Manuale utente

EUROPRO

EUROPRO Minijet 80 110 V Manuale utente

EUROPRO

EUROPRO Compact-Pro 30 Manuale utente

EUROPRO

EUROPRO 4P Manuale utente

EUROPRO

EUROPRO X-PRO E70 Manuale utente

EUROPRO

EUROPRO 150TH-V Manuale utente

EUROPRO

EUROPRO Jetmix 100-70 Manuale utente

EUROPRO

EUROPRO JETPRO 100-7 Manuale utente

EUROPRO

EUROPRO AC-65-G Manuale utente

Manuali Spruzzatore di vernice popolari di altre marche

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Manuale utente

Graco

Graco 246737 Manuale per l'uso e la cura

Binks

Binks SV100 Manuale utente

Fimco

Fimco LG-4-3-1 Manuale utente

AG SPRAY

AG SPRAY FS-ATV-25BL Manuale utente

Nordson

Nordson MicroMax 2 Manuale utente

Bonide

Bonide 051 Manuale operativo

zogics

zogics Z-DAS Manuale utente

KISANKRAFT

KISANKRAFT KK-KBS-165 Manuale utente

Matrix

Matrix SG 650 Manuale utente

Anest Iwata

Anest Iwata SGA-3 Guida rapida

paasche

paasche VV Scheda tecnica

Carlisle

Carlisle DeVilbiss JGA-510 Manuale utente

Gardena

Gardena 11120 Manuale utente

Conrad

Conrad Hobby Airbrush K3 Manuale utente

wiwa

wiwa 14025 R/F Manuale utente

Graco

Graco EM 390 Manuale operativo

DeVilbiss

DeVilbiss LUNA2i Manuale utente