EUROPRO X-PRO E70 Manuale utente
EUROPE PROJECTION - 228, avenue Olivier Perroy 13790 ROUSSET - Tél : +33 (0)4 42 29 08 96 – Fax : +33 (0)4 42 53 44 36
SAS au capital de 400 000 € - RCS Aix-en-Provence B 394 961 510 - NAF 2892 Z - Intracom : FR 54 394 961 510
X-PRO E70
Réf. 30960
User manual
Edition of 18/03/2022
More information on www.euromair.com
User manual - X-PRO E70 202203-573-ENGP2
You just acquired one of our
machines and all the team
of Europe Projection thanks
you for the condence
you have granted us.
Manufacturer of professional
equipments for paint and
llers, we have put our
know-how for 25 years
at the service of the
users of our machines.
Our technical & commercial
team is at your disposal
for any further information
you may need about the
machine you just acquired.
EUROPE PROJECTION
228, avenue Olivier Perroy
13790 ROUSSET
Tél : +33 (0)4 42 29 08 96
contact@euromair.com
SUMMARY
1. USER MANUAL............................................................. p. 3
1.1. Importance of the manual .........................................p. 3
1.2. Receivers of the manual............................................p. 3
2. WARNING .................................................................... p. 4
2.1. Safety .....................................................................p. 4
2.2. Transport ................................................................p. 6
2.3. End-of-life of the product ..........................................p. 7
3. YOUR MACHINE ........................................................... p. 8
3.1. Description..............................................................p. 8
3.2. Technical characteristics ...........................................p. 8
3.3. Identication of the components ................................p. 9
4. USE OF THE MACHINE ................................................. p.11
4.1. Machine prerequisites...............................................p.11
4.2. Machine starting up .................................................p.12
4.3. High pressure washer prerequisites ............................p.13
4.4. High pressure washer starting up ...............................p.14
4.5. Water doser.............................................................p.15
5. DEFECTS AND REMEDIES............................................. p.16
6. MAINTENANCE............................................................. p.17
7. SAFETY CARD RUNNING............................................... p.18
8. VOLUME SCHEME ........................................................ p.21
9. ELECTRICAL SCHEMES................................................. p.22
10. DECLARATION OF CONFORMITY ................................. p.29
11. WARRANTY CONDITIONS............................................ p.30
202203-573-ENG User manual - X-PRO E70 P3
1. USER MANUAL
1.1. IMPORTANCE OF THE MANUAL
This manual is a key part for the use of your machine. It summarizes the procedures of starting-up, cleaning
and maintenance of the device and also the safety instructions you need to observe.
Read carefully all the working and safety instructions and the warnings included in this manual before
starting your machine.
Most of the accidents are caused by the non-compliance of the safety standards and rules.
This manual must be kept near the machine, within reach of the user and held in good condition until the
nal destruction of the machine.
In case of loss or deterioration of the manual, you can ask the machine manufacturer mentioned on page
4 for a copy at any moment.
1.2. RECEIVERS OF THE MANUAL
This manual is intended to any staff which will manipulate the machine :
- people in charge of the transport of the machine
- people in charge of the use of the machine
- people in charge of the cleaning and maintenance of the machine
- people in charge of the nal destruction of the machine
User manual - X-PRO E70 202203-573-ENGP4
2. WARNING
2.1. SAFETY
Using the machine in an incorrect way or in non-compliance of the safety instructions indicated in
this manual can cause death or serious injuries.
Read carefully all the working and safety instructions and the warnings contained in this manual
before starting your machine.
• Respect all the safety standards before running the equipment.
• Use the equipment only for the applications specied in the manual.
• Always remain alert when using the equipment.
• Transport the machine using the handles or the appropriate grips.
• During the breaks, disconnect electrically the machine.
• Run the equipment to its nominal voltage.
• Let at least 50 cm of free space between the equipment and any obstacle so that the air ow
is not blocked.
• Know how to quickly stop the equipment in case of necessity.
• Never use the equipment while it is running abnormally or it is defective.
• Do not direct a water jet or ammable liquid on the machine.
• Never direct an air jet or product jet on a person or an animal.
• Do not touch warm surfaces of the equipment.
• Always wear adequate body protections (glasses, gloves, overall and mask) and pay attention
to long hair.
• Never touch moving parts.
• Do not insert any object or the hands inside the protection grids to avoid any accident or
damage to the machine.
• For any outside job, only use appropriate extension cords.
• Maintain the equipment carefully and clean it properly after every use.
• Disconnect the equipment before any intervention.
• Avoid absolutely to unscrew any connection while the machine is under pressure.
• Check the damaged parts.
• Do not clean the plastic parts with solvant.
• In case of needed After-Sale Service, always specify the machine model and its serial number.
• For any replacement of parts, only use genuine parts.
• Do not modify the machine.
• Do not cut or dismantle the protection grids.
• Do not open the electric box.
202203-573-ENG User manual - X-PRO E70 P5
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
2. WARNING (continued)
2.1. SAFETY (continued)
WORKSPACE
• Maintain the workspace clean and clear.
• Ambient operating temperature must be from 5°C and 35°C.
• Do not use the equipment in a potentially explosive area.
• Do not place any potentially inammable objects in close proximity to the machine.
• Take away every not qualied person from the working area of the machine, as well as children and
animals.
• Do not install the equipment on an inclined surface to avoid the risks of unexpected moves or falls.
HOSES
• Always use hoses and connections adapted to the used product (genuine parts), do not try to x it.
• Do not walk on the hoses, do not bend them.
• Do not use the hoses to pull the machine.
STORAGE
• Keep the equipment in a clean and clear area in which the temperature does not exceed +35°C.
• After every use, necessarily grease the pump with a mixture of water + storage liquid to avoid it blocking
up. The storage of a not greased pump can damage it seriously.
User manual - X-PRO E70 202203-573-ENGP6
IN CASE OF NECESSITY, WE SAVE OURSELVES THE RIGHT TO MAKE ANY USEFUL
MODIFICATION WITHOUT ADVANCED NOTICE.
2. WARNING (continued)
2.1. SAFETY (continued)
SAFETY SYSTEMS
This machine has been designed to allow working with the maximum safety.
So safety sensors and emergency stop has been setted on your machine without complicating your work.
We are insisting on your caring to maintain them in good condition and above all not to remove them.
In case of malfunction, please contact immediately your dealer.
HYDRAULIC
This machine is equipped with high pressure hydraulic circuits (200 bar).
The following insctructions are essential for your safety:
• Never tighten a hydraulic connection while the machine is working.
• Never try to wipe an oil drop on a hose or hydraulic component with your nger while the machine
is working.
• Take care of the good condition of the plumbing (a damaged or blistered rubber must be changed
immediately).
• Check regularly if the circuit does not have any leak.
• In any case, do not touch hydraulic parts (even when the machine is not working) because the
components shall be hot and there is a burn risk.
SAFETIES AND PROHIBITIONS
• The mixer grid rising up causes the mixer movement stop.
• The hopper grid rising up causes the screw movement stop.
• Stop of the projection stops compressed air consumption and pump rotation.
• As soon as the work is recovered, air release allows the pump restart.
• Emergency stop is located on the machine hood. Do not hesitate to use it if needed, this will immediately
stop the motor. To restart the machine after emergency stop button pushed, follow this procedure:
- Put the command handles in central position.
- Rearm emergency stop.
- Place the contact key on the ON position.
- Command panel lights must be lighted-up (green = correct / red = default).
- Resume sraying procedure.
202203-573-ENG User manual - X-PRO E70 P7
2. WARNING (continued)
2.2. TRANSPORT
• This machine was the object of a road homolagation (n°e2*2007/46/0673). As such, it must be
registered and can be thus dragged normally on the road network.
• The adjustable jockey wheel easily allows you to x the helm to the harness of your vehicle.
• The adjustable helm gives you the possibility of adjusting the machine horizontally.
• An electric cable provided with a grip allows you to link the device of lighting of the trailer with the
tractor truck.
• A cable of break allows to bind the device of harness of your vehicle with the machine in case of hanging
problem of the helm during a travel.
It is imperative to collide this cable on the harness of the vehicle.
Before any road travel:
• Check the pressure of the pneumatics which has to be 2.8 bar max.
• Check the tightening of the nuts of wheels.
• Check the tightening of the nuts of the articulated helm and the presence of pins.
• Clean reectors.
• Clean and check the functioning of the device of lighting.
• Collide the cable of break.
2.3. END OF LIFE OF THE PRODUCT
At its end-of-life, the machine must not be eliminated with the other household waste. The
uncontrolled elimination of waste can harm the environment or human health. Individuals are
invited to contact the distributor which sold them the product or to inquire with their city hall
to know where and how to get rid of the product so it can be recycled while respecting the
environment.
For any further information, please contact our hotline +33 4 42 29 08 96 or conseil@euromair.com.
Only are exempted from the obligation of brakes the only trailers under the double condition
that their total weight authorized in load does not exceed 750 kg nor half of the pure weight
of the truck tractor.
X-PRO E70 is not a transport trailer, it is strictly forbidden to transport people or products
related to the application of the machine.
User manual - X-PRO E70 202203-573-ENGP8
3. YOUR MACHINE
3.1. DESCRIPTION
X-PRO E70 is equipped with an electrical engine that drives a double gear pump that provides the hydraulic
ows required by the equipment.
The 400 L/min, 4 bar compressor is positioned on a plate for easy adjustment of the drive belt tension.
The screw and mixer rotation drives are driven by two orbital type motors and the hydraulic distribution by
industrial components whose controls are manual.
The components have been selected according to strict quality criteria.
The safety devices comply with the standards in place and the hydraulic circuits are protected against
possible blockages of the rotating elements. An air cooler ensures that the oil temperature is maintained
within the correct range.
3.2. TECHNICAL CHARACTERISTICS
Noise level 95 Lwa
Motorization 15 kW - 400 V - 32 A - 50 & 60 Hz
Hydraulic reservoir capacity 28 L
Screw pressure 200 bar
Mixer pressure 150 bar
Washer pressure 150 bar
Lifting jack pressure 60 bar
Mixer
capacity 200 L
hydraulic drive with two directions of rotation
mixer stop safety at grid opening
loading height of 87 cm
Hopper
hydraulic drive with two directions of rotation
screw stop safety at the grid opening
drain plug for cleaning
Centralized control panel includes starting up of the various functions (pump, mixer, lift)
adjustment of pump and mixer speeds
Compressor with pistons set at 4 bar
Compressor ow-rate 400 L/min
Screw pump standard : from 0 to 60 L/min max. at 40 bar max.
optional: up to 167 L/min
High pressure washer 11 L/min at 140 bar
Weight 700 kg
Delivered with
- a MAP 11 pump
- a Ø35 x 13,30 m product hose M50 x F35
- a Ø35 x 13,30 m product hose M35 x F35
- a Ø25 x 5 m hose M35 x M25
- a Ø10 x 33 m air hose
- a spraying lance
- eight nozzles (Ø8, 10, 12, 14, 16, 18, 20 & 22)
- three grouting nozzles (Ø10, 12 & 14)
- two Ø30 cleaning balls and two Ø50 cleaning balls
- a greasing pump with a grease cartridge
- a pressure controller with adapter
- a complete high pressure washer lance
- a 10 m high pressure washer hose
- a storage carry-case
- a suspension strap
1
9
12
2 3
4 5 6 7
8 10 11 14
13
202203-573-ENG User manual - X-PRO E70 P9
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS
1Hydraulic oil level 8Cylinder shaft lubricator
2Compressor oil level 9Jockey wheel
3Electric circuit breaker 10 Product pressure control manometer
4Hopper bearing lubricator 11 Pump outlet
5Mixer bearing lubricator 12 Hood clips
6Motor bearing lubricator 13 Emergency stop
7Mixer grid roller lubricator 14 Air valve
19
18
17
16
20
21
25
24
23
22
15
User manual - X-PRO E70 202203-573-ENGP10
3. YOUR MACHINE (continued)
3.3. IDENTIFICATION OF THE COMPONENTS (continued)
15 ON / OFF contact key
16
Power-on indicator light
Green = undervoltage
Red = fault
17 AUTO / MANU switch
18 Screw hopper circuit pressure manometer
Maximum pressure 200 bar.
19 Mixer circuit pressure manometer
Maximum pressure 150 bar.
20
Mixer rotation speed controller
Clockwise rotation: increase speed.
Counter-clockwise rotation: decrease speed.
21
Hopper screw speed controller
Clockwise rotation: increase speed.
Counter-clockwise rotation: decrease speed.
22
Product pump rotation control handle
Reverse: left position with spring return to the centre.
Stop: centre position.
Forward: right position maintained.
23
Mixer lifting handle
Rising: left position with spring return to the centre.
Stop: centre position.
Descent: right position with spring return to the centre.
24 Handle On (right position) / Off (left position) HP
washer
25
Mixer rotation control handle
Reverse: right position maintained.
Stop: centre position.
Forward: left position maintained.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali EUROPRO Spruzzatore di vernice
EUROPRO
EUROPRO Compact-Pro Joint 20 Manuale utente
EUROPRO
EUROPRO Minijet 80 110 V Manuale utente
EUROPRO
EUROPRO Jetmix 100-70 Manuale utente
EUROPRO
EUROPRO AC-65-G Manuale utente
EUROPRO
EUROPRO JETPRO 100-7 Manuale utente
EUROPRO
EUROPRO AC-50-G Manuale utente
EUROPRO
EUROPRO EUROHVT1 Manuale utente
EUROPRO
EUROPRO MIXPRO 14 Manuale utente
EUROPRO
EUROPRO COMPACT-PRO 60 Manuale utente
EUROPRO
EUROPRO DropPro 30P Manuale utente
EUROPRO
EUROPRO Compact-Pro 120 Manuale utente
EUROPRO
EUROPRO Eurospray S Manuale utente
EUROPRO
EUROPRO 150TH-V Manuale utente
EUROPRO
EUROPRO Compact-Pro 30 Manuale utente
EUROPRO
EUROPRO 4P Manuale utente
EUROPRO
EUROPRO Compact-Pro Joint 10 Manuale utente
EUROPRO
EUROPRO Compact-Pro 55 Manuale utente
EUROPRO
EUROPRO Compact-Pro 70 Manuale utente
EUROPRO
EUROPRO JETPRO 80 Manuale utente
EUROPRO
EUROPRO JETPRO 100-7 Manuale utente
