EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN DO 1500 Manuale utente

CyberComm Pro 2.4

Data Acquisition Software

Installation & User Guide

CyberScan DO 1500

Bench Dissolved Oxygen Meter

Techno

ade

68X292341

Rev.0 01/04

PREFACE

Thank you for selecting the CyberScan DO 1500 bench meter. This meter comes with the CyberComm Pro

DAS Software which allows you easy access and communication via a computer with connection to the

meter.

The instruction manual serves to explain the use of the CyberComm Pro step-by-step installation and user

guide to help you familiarize with the software’s features and functions. It is structured sequentially with

illustration of active software screens and diagrams that explains the various functions and menus available.

This manual is written to cover as many anticipated applications and uses of the CyberComm Pro software

along with CyberScan DO 1500 bench meter only. If there are doubts in the use of the software, please do

not hesitate to contact Technical Support at [email protected] or call us at (65) 6778-6876 for

assistance.

CyberComm Pro software is FREE for all customers who have purchased our bench meters. Please

download the latest CyberComm Pro version via our website at www.eutechinst.com/cybercomm-

software.htm

Eutech Instruments reserves the rights to change, make improvement and modify specifications without prior

notice and cannot accept any responsibility for damage or malfunction to the instrument caused by improper

use.

Eutech Instruments Pte. Ltd.

Rev. 0 01/04

TABLE OF CONTENTS

1Data Acquisition in windows Version 1

1.1 The CyberComm DAS Package 1

1.2 System Requirements 1

1.2.1 Setting the Communication Parameters 1

2Installation of CyberComm Data Acquisition Software (DAS) 2

2.1 Loading of CD-ROM 2

2.2 User Name and Organisation Entry 3

2.3 Splash Screen 4

3Cybercomm Pro Main Menu 5

3.1 Communication Settings (File) 5

3.2 Data Log Options (File) 6

3.3 Connect to Meter (File) 6

4Main Window (After connecting Meter to Computer) 7

4.1 CyberComm Professional Manuals (Help) 7

4.1.1 File Options (File) 8

4.1.2 About CyberComm Pro (Help) 8

4.2 Sub menus & Function Icons on the CyberComm Program 9

4.2.1 Function Icons 10

4.2.2 Measurement Mode 13

4.2.3 Show Cursor 13

4.2.4 Information 13

4.2.5 Data Reading 13

4.2.6 Temperature Reading 13

4.2.7 Mode Drop down Menu 13

4.2.8 Store, Recall & Clear Memory 13

4.3 To quit CyberComm Program 14

5Retrieve Recorded Data 15

6Export Data Readings 17

6.1 Steps to export data readings from CyberComm Professional: 17

6.2 Paste data in Microsoft Word

6.3 Paste data in Microsoft Excel

, WordPad and Notepad 18

7Print Readings 20

7.1 Printing using a serial printer 20

7.2 Setting up the Printer 20

7.3 Connecting the Cable to the Computer 20

Instruction Manual CyberComm DO 1500

1 DATA ACQUISITION IN WINDOWS VERSION

1.1 The CyberComm DAS Package

The CyberComm Data Acquisition Software (DAS) package is a user-friendly data acquisition package that

provides a convenient way to capture data for future analysis. This CyberComm Pro is only able to run on

Windows

Operating System (refer to 1.2 System Requirements for details). Communication between your

meter and PC is bi-directional as the meter functions can be remotely controlled by the DAS. Data type

stored is in the ASCII format.

Windows is the registered trademark of Microsoft Corporation

1.2 System Requirements

To run the CyberComm Pro DAS software, the following items are required:

1 IBM Compatible PC Pentium and above

2 Windows Operating Systems 95 and above

3 VGA/SVGA Monitor

4 RS232C Serial Communication Cable

1.2.1 Setting the Communication Parameters

The meter is capable of different communication configurations for baud rate, parity and stop bits. The

values chosen for these parameters of the meter must match those chosen for the computer, same goes for

the serial printer if it is connected.

Instruction Manual CyberComm DO 1500

2 INSTALLATION OF CYBERCOMM DATA ACQUISITION SOFTWARE (DAS)

2.1 Loading of CD-ROM

See Figure 1.

Before running the program, check that the CyberScan DO1500 meter is properly connected to the

computer. It is preferable to connect to either one of the COM (serial) ports available on a computer. Note

the number of the COM port that you have connected to the meter as this will be required in setting up the

CyberComm DAS later.

a) Turn on the computer (PC).

b) Insert the CD-ROM provided into a CD-ROM drive of your PC.

c) To install the DAS, use the My Computer to view the file contents in your CD_ROM drive. Locate and

click onto the SETUP file under the CyberComm directory. Double-click again on this file and the

program automatically starts installation. Alternatively you can use the Add/Remove Programs feature in

Control Panel to install the CyberComm and follow the instruction accordingly. If in doubt, please refer to

your Microsoft Operating Manual for further details.

Figure 1: CyberComm Pro Installation/ Welcome Screen

Instruction Manual CyberComm DO 1500

2.2 User Name and Organisation Entry

The CyberComm program (as below) prompts you to enter the name of the user and organization.

See Figure 2.

Follow the instruction in the subsequent menu for your desired location of this file to be saved. Make relevant

changes until the setup is completed (shown below). Click on the Finish button.

See Figure 3.

“Launch the program file” if you wish to use it instantaneously. Note: The file is now stored in your

designated hard-disk location. Create a shortcut of this file later if you wish.

Figure 2: CyberComm Pro Installation/ User Information

Figure 3: CyberComm Pro Installation/ Setup Complete

Instruction Manual CyberComm DO 1500

2.3 Splash Screen

See Figure 4.

Upon clicking the Finish button, a splash screen pops up (shown below). The meter’s communication

protocol setting i.e. baud rate, parity and stop bits must be properly set before you power the meter on. DO

NOT press any key on the meter while the program is running.

Go to the URL stated to download the latest FREE version of the CyberComm Pro software.

Figure 4: Start up Menu

Click OK to go to the following CyberComm Pro Main Menu.

Instruction Manual CyberComm DO 1500

3 CYBERCOMM PRO MAIN MENU

Figure 5: CyberComm Main Menu

See Figure 5. Select Communications Settings and set the appropriate requirements before connecting the

meter.

3.1 Communication Settings (File)

See Figure 6.

To make changes, use the drop-down menu of each parameter to set to desired values to match the meter’s

settings. After selecting proper communication parameters, select OK button to proceed. Otherwise click

CANCEL if no change is made. To restore to factory default settings, click onto the Restore Defaults.

Figure 6: Communications Settings

a) Connect Using

Select COM Port from the drop down menu; 1, 2, 3, 4 or 5 depending on the port connected with the

meter.

b) Baud Rate

Select Baud Rate from the drop down menu. 4800, 9600, 19200 and 38400.

c) Parity

Select Parity from the drop down menu: None (0), Odd (1)or Even (2).

d) Stop Bits

Select Stop Bits from the drop down menu; 1 or 2.

Instruction Manual CyberComm DO 1500

3.2 Data Log Options (File)

See Figure 7.

a) Time between successive readings (1-3600 sec). Default is 10 sec.

Select the time lag preferred between each successful reading using the arrow keys.

b) Length of Time to Capture Data. Default is 0min. (0= indefinitely, units = min)

Select the total length of time preferred to capture data using the arrow keys.

The data capture will automatically stop upon reaching the set amount of time.

Maximum default time is 10080 minutes (1 week).

Figure 7: Data Log Options

Click OK to exit and save settings. The screen will return to the Main Menu (Figure 5).

After matching the Communication Settings and setting the Data Log Options between your computer and

the CyberScan DO 1500 meter using CyberComm Professional, you can now capture data into your

computer for analysis and storage purposes.

See Section 5: Retrieve Recorded Data to retrieve Recorded Data Readings.

3.3 Connect to Meter (File)

See Figure 10.

From the Main Menu, select Connect to Meter to start the link between your computer and the meter. The

complete main window the CyberComm Professional will start after connection to the meter:

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EUTECH INSTRUMENTS Software

EUTECH INSTRUMENTS

EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN CON 1500 Manuale utente

EUTECH INSTRUMENTS

EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN PH 2500 Manuale utente

EUTECH INSTRUMENTS

EUTECH INSTRUMENTS CYBERCOMM PRO FOR CYBERSCAN PH 2100 Manuale utente

EUTECH INSTRUMENTS

EUTECH INSTRUMENTS CYBERCOMM 5000 FOR CYBERSCAN 5000 Manuale utente

Manuali Software popolari di altre marche

COMPRO

COMPRO COMPROFM Manuale utente

Muratec

Muratec OFFICEBRIDGE ONLINE Manuale utente

Oracle

Oracle Contact Center Anywhere 8.1 Manuale utente

Adobe

Adobe 65007312 - Photoshop Lightroom Manuale

Avaya

Avaya NULL One-X for RIM Blackberry Manuale utente

HP ProLiant BL420c Manuale utente

PS Audio

PS Audio PowerPlay Manuale del proprietario

Brady

Brady LOCKOUT PRO 3.0 Manuale di servizio

Avaya

Avaya Interaction Center Manuale utente

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuale

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuale utente

Oracle

Oracle Application 9i Manuale utente

Acer

Acer RDM Manuale utente

Canon

Canon Vixia HF21 Manuale utente

Canon

Canon ZR950 Manuale utente

Samsung

Samsung Auto Backup Manuale utente

Polycom

Polycom Vortex EF2201 Istruzioni per l'installazione e il funzionamento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuale utente