Everest AP300 Manuale utente

205 Ravendale Drive, Mountain View, CA 95054 (408) 300 9236 www.everestnetworks.com

INSTALLATION GUIDE

AP300

Wireless Access Point

Model Number: AP23I300

Release Number: 2.5.0

Page | 2

www.everestnetworks.com

INSTALLATION GUIDE

AP300

SAFETY WARNINGS ...................................................................................................................................... 1

General Safety ................................................................................................................................................................................... 1

Working Aloft Warning ...................................................................................................................................................................... 1

Lightning Activity Warning ................................................................................................................................................................ 1

Explosive Device Proximity Warning .................................................................................................................................................. 1

Antenna Placement Warning ............................................................................................................................................................. 1

Grounding Warning ........................................................................................................................................................................... 1

Power Installation Warning ............................................................................................................................................................... 1

Solar Irradiation and High Temperature Protection ........................................................................................................................... 1

OVERVIEW ................................................................................................................................................... 2

DEPENDENCIES ............................................................................................................................................................................................ 2

AP 1002 OI PACKAGE CONTENTS ................................................................................................................................................................... 2

ADDITIONAL ITEM ........................................................................................................................................................................................ 2

ITEM IDENTIFICATION .................................................................................................................................................................................... 3

RELATED DOCUMENTATION ............................................................................................................................................................................ 4

Access Point Installation Guides ...................................................................................................................................................... 4

Controllers Installation Guides ........................................................................................................................................................ 4

Systems User’s Guides .................................................................................................................................................................... 4

INSTALLING AP300 ....................................................................................................................................... 5

AP300 INSTALLATION USING MOUNTING BRACKET ............................................................................................................................................ 5

CONFIGURING AP300 ................................................................................................................................... 8

LOGGING INTO BASECAMP ............................................................................................................................................................................. 8

CONFIGURING AP300 .................................................................................................................................................................................. 8

Configuring the Country Code ............................................................................................................................................................ 9

Configurating the Operational Mode .............................................................................................................................................. 11

CONFIGURING AP300 TO WORK WITH DISCOVERY PROTOCOL ............................................................................................................................ 12

REGULATORY DECLARATIONS ..................................................................................................................... 13

FEDERAL COMMUNICATION COMMISSION (FCC) INTERFERENCE STATEMENT .......................................................................................................... 13

FCC RADIATION EXPOSURE STATEMENT: ........................................................................................................................................................ 14

EUROPEAN UNION (EU) INTERFERENCE STATEMENT: ......................................................................................................................................... 15

EU RED ARTICLE 10 STATEMENT .................................................................................................................................................................. 15

EU RADIATION EXPOSURE STATEMENT: .......................................................................................................................................................... 15

TECHNICIAL SPECIFICATIONS ...................................................................................................................... 17

MECHANICAL SPECIFICATIONS ....................................................................................................................................................................... 17

LEDS ...................................................................................................................................................................................................... 17

OPERATIONAL REQUIREMENTS ...................................................................................................................................................................... 17

ENVIRONMENTAL REQUIREMENTS .................................................................................................................................................................. 18

RELIABILITY ............................................................................................................................................................................................... 18

PERFORMANCE .......................................................................................................................................................................................... 18

TRANSMIT POWER ..................................................................................................................................................................................... 19

STANDARDS .............................................................................................................................................................................................. 19

TABLE OF CONTENTS

Page | 1

www.everestnetworks.com

INSTALLATION GUIDE

AP300

The AP300 Wireless Access Point installation must be performed by certified technicians only

and in compliance with all local/state/federal safety requirements. All warnings and information in

this manual should be read and understood before proceeding with installation. Any noncompliance

by the installer or end user voids the warranty of the product.

General Safety

You can be killed or injured if performing antenna installation near electrical power lines.

Carefully read and follow all instructions in this guide. Ensure that there are no high voltage or

electrical fields nearby.

Working Aloft Warning

When working on tower or roof, individuals must wear safety belts. Tools must be tied to the

individual using them. Workers below must wear safety helmets.

Lightning Activity Warning

Make sure not to connect or disconnect cables during periods of lightning activity. A surge

protective device should be installed to prevent potential damage from very high surges, for

instance, the peak surges caused by lightning.

Explosive Device Proximity Warning

Do not operate network devices close to explosive merchandise or in explosive environments,

for example, in the vicinity of a gas station.

Antenna Placement Warning

Do not install any antenna near overhead power lines or other electric light, or where the

antenna can come into contact with such circuits.

Grounding Warning

Protect your AP300 Wireless Access Point by installation of grounding lines. The ground

connection must be complete before connecting power to the AP300 Wireless Access

Point

enclosure.

The

requirement

grounding

make

sure

the

resistance

less

than



5 ohms between

the ground termination point to grounding tier.

Power Installation Warning

The installation of the power switch must be performed by a certified technician. The power

switch is not supplied with the AP300 Wireless Access Point. The power cord must be assembled

by a certified technician, and the final assembly must comply with related requirements.

Solar Irradiation and High Temperature Protection

Pay attention to the level of sunlight, which can increase the working temperature of the

AP300 Wireless Access Point to higher than specifications allow.

SAFETY WARNINGS

Page | 2

www.everestnetworks.com

INSTALLATION GUIDE

AP300

OVERVIEW!

This document provides information and procedures required to install and configure the AP300

Wireless Access Point (model number AP23I300) into a WLAN installation and is intended for

certified system installers, system administrators, and network operators.

The WLAN system is designed for high density deployments. It comprises of the following main

components:

•

AP300 Wireless Access Point (AP)

•

Access Controller (AC)

•

BaseCamp™ Wireless Management System

Dependencies

The installation and configuration of AP300 Wireless Access Point depends on the following

components:

•

Access Controller

•

BaseCamp™ Wireless Management System

•

DHCP Server

AP 1002 Oi Package Contents

The AP300 package consists of the following items:

•

One AP300 Wireless Access Point

•

Ceiling Mount Adapter

•

Nylon Hollow Wall Anchors and Screws

Additional Item

The following items are to be purchased separately:

•

Access Controller

The BaseCamp™ Wireless Management System is bundled along with the Access Controller.

The installation technician is responsible for procuring additional wall/ceiling

anchors, mounting screws, and safety systems, as required by the

local/state/federal authorities governing the installation of the AP300 Wireless

Access Point.

CHAPTER ONE

Page | 3

www.everestnetworks.com

INSTALLATION GUIDE

AP300

Item Identification

The following figures show top and bottom view of the AP300 Wireless Access Point.

Figure 1: AP300 Wireless Access Point - Top View

Figure 2: AP300 Wireless Access Point - Bottom View

CHAPTER ONE

Page | 4

www.everestnetworks.com

INSTALLATION GUIDE

AP300

Related Documentation

Access Point Installation Guides

•

AP1004NRe Installation Guide.................................... DOC-000003

•

AP1004WRe Installation Guide ................................... DOC-000004

•

AP1002We Installation Guide ..................................... DOC-000005

•

AP1002Oi Installation Guide ....................................... DOC-000006

•

AP1004WRi Installation Guide .................................... DOC-000023

•

AP1004UNe Installation Guide ................................... DOC-000024

•

AP1004WRe-U Installation Guide............................... DOC-000025

•

AP300 Installation Guide............................................. DOC-000026

Controllers Installation Guides

•

Access Controller Configuration Guide ...................... DOC-000019

BaseCampTM Wireless LAN Management

•

BaseCamp™ System User Guide............................... DOC-000008

•

BaseCamp™ Quick Start Guide ................................. DOC-000017

CHAPTER ONE

Page | 5

www.everestnetworks.com

INSTALLATION GUIDE

AP300

INSTALLING AP300

This section provides information and procedures required to install the AP300 Wireless Access

Point using various methods.

AP300 Installation Using Mounting Bracket

Figure 3 on the next page shows how to mount the AP300 access point to a wall or ceiling, First,

if applicable, position the mounting plate in the desired location on the wall or ceiling so the network

cable aligns with one of the larger opening in the mounting plat.

The AP300 Wireless Access Point installation must be performed by

certified technicians only and in compliance with all local/state/federal safety

requirements and building codes.

Proper grounding and surge protectors may be required in outdoor

installations.

The network coverage depends on the location and position of the AP300

Wireless Access Point.

CHAPTER TWOCHAPTER TWO

Install the mounting plate with clips facing away from the wall or celling.

If mounting the AP300 on a wall, please insure that the orientation of the

bracket is correct so the Text on the AP300 is readable.

Page | 6

www.everestnetworks.com

INSTALLATION GUIDE

AP300

Figure 3: AP300 Mounting

Secure the mounting plate using the included drywall anchors and screws and connect the

network cable to the network LAN1 port of the access point.

CHAPTER TWO

Page | 7

www.everestnetworks.com

INSTALLATION GUIDE

AP300

Figure 4: Locking the AP300 to Mounting

Align the access point mounting holes with the mounting plate clips and rotate the access point

clockwise to lock into place.

Finally, install the cable guard by shield it onto the mounting plate until it locks into the plate.

CHAPTER TWO

Page | 8

www.everestnetworks.com

INSTALLATION GUIDE

AP300

CONFIGURING AP300

This section provides an overview of the basic procedures required to configure the AP300

Wireless Access Point. Please refer to the BaseCamptm User’s Guides for more details on

configurating access points and setting up more advanced deployment scenarios.

Logging into BaseCamp

Perform this procedure to log into BaseCamp.

Enter the BaseCamp URL, https://<AC IP address> in to the address window on your browser.

When the Everest BaseCamptm welcome screen is displayed, use the following credentials to log

in:

Email: [email protected]

Password: admin

Configuring AP300

Perform this procedure to configure the AP300 Wireless Access Point.

Configure the PoE+ port of the L2/L3 switch as access ports with untagged PVID.

Only one Ethernet port is required for AP300 installation and operation.

For more information on configuring the AP300 Wireless Access Points that are connected to the

POE+ source that supports a discovery protocol, see Configuring AP300 to Work with Discovery

Protocol.

Connect the AP300 Access Point to a POE+ source.

Within about 90 seconds after the access point receives power, the AP300 Access Point will

requests an IP address from the DHCP server

Verify if the AP300 was assigned an IP address, by doing one of the following:

Review the DHCP logs on the DHCP server

Log into BaseCamp to review the status in the Access Points screen

When an AP is discovered, it will receive its own IP address and the IP Address of the Access

Controller. Once a secure connection has been established, the AP300 will be displayed in the

‘Access Point’ screen in the BaseCamptm Web Page. Figure 6 on the next page shows an example

of the information available on this screen.

CHAPTER THREE

Indice

Altri manuali Everest Punto di accesso wireless

Everest

Everest AP12I360 Manuale utente

Everest

Everest AP1004WRi Manuale utente

Manuali Punto di accesso wireless popolari di altre marche

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuale utente

Ubiquiti

Ubiquiti NanoStation NSM2 Manuale utente

Cisco

Cisco Aironet 1550 Series Manuale utente

Aruba

Aruba IAP-335 Manuale utente

Advantek Networks

Advantek Networks AWN-AP-54MR Manuale utente

IP-COM

IP-COM AP355 Manuale utente

Buffalo

Buffalo AirStation WLA-L11G Manuale utente

EnGenius

EnGenius EnStationACv2 Manuale utente

D-Link

D-Link DAP-3662 Manuale utente

xG Technology

xG Technology xMax CN1300 Manuale utente

Widelink

Widelink ezWave WAP-1100 Series Manuale utente

Edimax

Edimax CAP1200 Manuale utente

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuale utente

Aruba

Aruba AP-203R Manuale utente

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuale utente

CreatComm

CreatComm TB5F Manuale utente

SineDigital

SineDigital MW-1500AP(H) Manuale utente

TP-Link

TP-Link AP9650 V1 Manuale utente