EverFocus MoniVue System ESN41 Manuale utente

MoniVue System

ESN41 / ESN41-E Ultra Compact 4CH H.264 Video Recorder

Quick Installation Guide

Release Date: March, 2017

All the images including product pictures or screen shots in this document are for example only. The

images may vary depending on the product and software version. Information contained in this

document is subject to change without notice.

MoniVue System – Video Recorder

1. Introduction

The MoniVue System, bundled with one compact 4CH video recorder and four 1080p FHD

cameras, is ideal for the surveillance environment where areas are closely situated. As MoniVue

System is bundled with a video recorder and four-camera, we will introduce the two products

separately. The content below describes the hardware and software of the 4CH recorder. For

more details about the cameras, please refer to the User’s Manual of MoniVue Camera.

Video Recorder

Camera x 4

The video recorder of MoniVue System comes in two models. Here we listed some

differentiation between the two models.

Spec

ESN41 FHD

ESN41-E FHD

Channels 4CH mini DIN 4CH mini DIN

Alarm In / Out 4 / 4 -

SD Card Slot

2 (max. 128GB per card)

1 (max. 128GB)

RS-485 1 -

Power Source PoE / 12VDC 12VDC

Dimensions

ESN41 FHD

ESN41-E FHD

38.4mm / 1.51"

131mm / 5.16"

111mm / 4.37"

153mm / 6.02"

158mm / 6.22"

MoniVue System – Video Recorder

Packing List

•

Video Recorder x 1 •

D-Sub Cable x 1 (see 2.3.2 D-Sub Cable)

•VGA Cable x 1 •Quick Installation Guide x 1

•

Power Adaptor x 1 (see 2.3.1 Power Input) •

CD x 1 (Please see Note 3.)

•

IR Remote Control (with two AAA batteries. See Note 4) x 1

•Mounting Kit x 1

DIN Rail Mounting Screw x 2

RS-485 Terminal Block

DIN Rail Mounting Clip x 2

Alarm I/O Terminal Block

Mounting Screw x 4

Mounting Screw Anchor x 4

(Applicable to 35mm DIN Rails)

Note:

1. Equipment configurations and supplied accessories vary by country. Please consult your

local EverFocus office or agents for more information. Please also keep the shipping carton

for possible future use.

2. Contact the shipper if any items appear to have been damaged in the shipping process.

3. The CD contains the IP Utility software, User Manual and Quick Installation Guide.

4. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries

according to the instructions.

a. Use only two AAA dry cell batteries.

b. Do not dispose of the batteries in a fire as it may explode.

MoniVue System – Video Recorder

Optional Accessories

Camera

S200

MoniVue Camera, 2.7mm, Sony sensor,

1080p, 3m cable, Mini Din

S208

MoniVue Camera, 8mm, Sony sensor, 1080p, 3m

cable, Mini Din, Focus Adjustable, Industrial use

Camera Extension Cable

MEC-009

MoniVue System Extension Cable – 9m

PoE Switch

EverFocus 5 / 8 / 16 / 24 Ports PoE Switch

5 Ports: ES0501-40

8 Ports: ES0812-31 / ES0802-41

16 Ports: ES1625-31 / ES1645-51

24 Ports: ES2426-31 / ES2446-51 / ES2448-62

MoniVue System – Video Recorder

Front Panel

1 2 3 5 64

No. Name Description

1 IR Receiver Receives data from the infrared remote control.

2 System LEDs

Power: Lights red continuously when power is supplied.

SD: Lights green continuously when SD card is reading or writing data.

Error: Lights yellow continuously when system error occurs, including

System Clock Error, SD Failed, SD Off and Network Loss.

3 SD Card Slot

Insert a SDHC/SDXC card (up to 128GB per card) for recording (see 2.2

SD Card Installation). To see the SD card info, see 6.5.1 Storage in the

User’s Manual. You can also see Appendix G for tested card brands.

(ESN41-E FHD only provides one SD Card Slot)

4 Reset Button Press and hold the Reset Button to restart system.

5 USB2.0 Port

Connects to a USB storage device or a mouse. You can use the USB

storage device for archiving (backup) recordings. Up to 4TB storage

capacity is supported of the USB storage device.

6 LAN / PoE Connects to a 10/100/1000 Ethernet or PoE switch (ESN41-E FHD

doesn’t support PoE function).

MoniVue System – Video Recorder

Rear Panel

12356

No. Name Description

1 DC Power Input Connects to power source using the supplied Power Adaptor. For

details, please refer to 2.3.1 Power Input.

2 RS-485 Port

This function is only available for ESN41 FHD. Connects to a RS-485

device such as PTZ camera. Please insert the supplied RS-485 Terminal

Block to the RS-485 Port in advance.

3 D-Sub Port Connects to the video input/output and audio input/output devices

using the supplied D-Sub Cable. Please refer to 2.3.2 D-Sub Cable.

4 Alarm I/O

This function is only available for ESN41 FHD. Connects up to 4 alarm

input and 4 alarm output devices. You can also connect to the

radio-controlled clock for time synchronization. Please insert the

supplied Alarm I/O Terminal Block to the Alarm I/O Port in advance.

5 EXT Box This function is currently reserved. Connects to an external I/O box.

6 VGA Connects to a monitor using the supplied VGA Cable. You can display

live view or perform the playback and OSD operations.

MoniVue System – Video Recorder

2. Installation

2.1 Mounting

You can mount the video recorder on a Flat Surface or on a DIN Rail.

Mounting on Flat Surface

To mount the video recorder on a flat surface:

1. Drill four holes on the mounting surface according to the hole-position on the video

recorder.

2. Insert the four supplied Mounting Screw Anchors into the holes on the mounting surface.

3. Place the video recorder on the mounting surface against the anchoring surface so that the

holes line up. Screw the video recorder to the mounting surface using the supplied four

Mounting Screws.

Mounting on DIN Rail

1. Screw the supplied two DIN Rail Mounting Clips to two holes on the bottom of video

recorder with the supplied two DIN Rail Mounting Screws.

DIN Rail Mounting Clip

DIN Rail Mounting Screw

Note: Depends on the way you would like to mount the video recorder on the DIN Rail

(vertically or horizontally), you can choose two holes from one of the sides (Up, Down,

Left, Right) for screwing the DIN Rail Mounting Clips.

MoniVue System – Video Recorder

2. Hitch the hook of the DIN Rail Mounting Clips on the upper edge of DIN rail and then push

the video recorder to the DIN rail. You will hear a clip sound, which means it has been

locked to the DIN Rail tightly.

3. A typical mounting may look like the image below. You can mount the video recorder on

the DIN rail vertically or horizontally.

Note: The supplied DIN Rail Mounting Clips are applicable to the standard 35mm DIN Rails.

2.2 SD Card Installation

The video recorder provides SD card function for recording. Please follow the steps below to

install and activate the SD Card recording function. Up to 128GB SDHC/SDXC card capacity is

supported (see Tested SD Cards on the below page). Note that ESN41 FHD supports 2

SDHC/SDXC card slots and ESN41-E FHD supports 1 SDHC/SDXC card slot.

1. Insert the SD card(s) to the card slot(s) on the front panel of video recorder.

2. The video recorder will automatically detect when a new SD card has been inserted and

the below SD card format message will pop-up. Click Yes to format the SD card. Note that

only the formatted SD card can be used for recording.

3. After formatting the SD card(s), the system will enter the Live View window. By default, the

system will automatically record all the connected channels.

MoniVue System – Video Recorder

Tested SD Cards:

The video recorder support SDHC/SDXC card up to 128 GB. The following brands of the SD

cards have been tested by EverFocus.

Brand SanDisk Teamgroup SanDisk SanDisk Transcend

Form Factor SDXC SDXC SDHC/SDXC SDHC/SDXC SDHC/SDXC

Card Capacity 128 GB 64 GB 32 GB 32 GB 32 GB

Card Rate Level Class 10 UHS-1 Class 10 U1 Class 2 Class 10 U1

Brand SanDisk Toshiba Kingston

Form Factor SDHC/SDXC SDHC/SDXC SDHC/SDXC

Card Capacity 16 GB 16 GB 16 GB

Card Rate Level Class 10 U1 U3 Class 10 U1

After installing the SD Card, it’s recommended to enable the Record Overwrite function. The

Record Overwrite function enables the system to overwrite the recordings when the card

space is full. If Record Overwrite is not enabled, the recording function will stop when card

space is full.

To enable the Record Overwrite function, please go to the OSD menu: System < Record.

MoniVue System – Video Recorder

2.3 Basic Connection

After installing the video recorder, you can start connecting the external devices to the system.

The instructions below describe the basic connection to the system.

The image below uses ESN41 FHD as an example.

123456

SD Card

Mouse WAN

CMS (Client PC)

NB / PC

Power Adaptor D-Sub Cable

Audio Input / Output Camera

Main Monitor (VGA)

1. To record videos, connect a SDHC/SDXC card to the card slot (see 2.2 SD Card Installation).

2. To control the system, connect a mouse to the video recorder or use the supplied IR

Remote Control.

3. To manage the video recorder over network, use a standard RJ-45 cable to connect the

video recorder to the network.

Note: The ESN41 FHD features PoE function, you can also power the video recorder

through the PoE port by connecting to a PoE switch.

4. To power on the video recorder, connect the video recorder to power using the supplied

Power Adaptor (see 2.3.1 Power Input).

Note: The ESN41 FHD features PoE function, you can also power the video recorder

through the PoE port by connecting to a PoE switch.

5. Connect the audio and video devices to the video recorder using the supplied D-Sub Cable

(see 2.3.2 D-Sub Cable).

6. To view videos, connect a monitor to the VGA port using the supplied VGA Cable (see 2.3.3

Monitor Connection).

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EverFocus Registratore digitale

EverFocus

EverFocus UNIGUARD 4 HDD Series Manuale utente

EverFocus

EverFocus EDR410M Manuale utente

EverFocus

EverFocus VANGUARD II 16x8H Manuale utente

EverFocus

EverFocus EDSR 900F Manuale

EverFocus

EverFocus PowerPlex EDR1600 Manuale di servizio

EverFocus

EverFocus EDSR-900 Manuale utente

EverFocus

EverFocus EDVR16D3 Manuale utente

EverFocus

EverFocus H.265 VANGUARD II Series Manuale utente

EverFocus

EverFocus EDSR 400F Manuale utente

EverFocus

EverFocus EMV1200 FHD Manuale utente

EverFocus

EverFocus EDSR100 Manuale utente

EverFocus

EverFocus PARAGON FHD 16x4 Manuale utente

EverFocus

EverFocus EMV401 Manuale utente

EverFocus

EverFocus ERS-4 Manuale utente

EverFocus

EverFocus ECOR Series Manuale utente

EverFocus

EverFocus PARAGON264x1 Manuale utente

EverFocus

EverFocus PARAGON Manuale utente

EverFocus

EverFocus EMV800 HD Manuale utente

EverFocus

EverFocus NDVR Manuale utente

EverFocus

EverFocus ECOR264-D2 DVR Series Manuale utente

EverFocus

EverFocus ECOR264-4X1 Manuale utente

EverFocus

EverFocus VANGUARD II 8x4H Manuale utente

EverFocus

EverFocus EDVR SERIES Manuale utente

EverFocus

EverFocus ENDEAVOR EDRHD-2H14 Manuale utente

Manuali Registratore digitale popolari di altre marche

FLIR

FLIR M3100E Series Manuale utente

VTRACKPRO

VTRACKPRO FPRO300 Manuale utente

Swann

Swann NVR-7085 models Manuale utente

XtendLan

XtendLan DVR-1670C Manuale utente

urmet domus

urmet domus 1093/004AHD Manuale utente

Holux

Holux M1 Manuale utente

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Manuale utente

Whistler

Whistler D16VRS Manuale utente

Defender Security

Defender Security 82-20235 Manuale utente

MISUMI

MISUMI MP-WF100M Manuale utente

Speco

Speco D8HU Manuale utente

UST

UST DDR-E04AA Istruzioni per l’uso

Consolidated

Consolidated Digital Video Recorder Manuale utente

Mace

Mace DVR0404RW Guida rapida

RCA

RCA RTD315W Manuale utente

FSM

FSM Colibri Grande PRO Manuale utente

Hauppauge

Hauppauge HD PVR 2 Manuale utente

Identivision

Identivision ICR-PH161i PIONEER Manuale utente