EverFocus EAN Plus Series Manuale utente

EAN Plus Series

IP Box Camera

Quick Installation Guide

** Lens not included.

Release Date: October, 2012

EAN Plus Series

1. Overview

The EAN Plus Series is a box type IP camera designed for indoor use. The series comes in four

models: EAN3120 Plus / 3220 Plus / 3300 Plus.

Model Name Megapixel WDR

EAN3120 Plus 1.3 MP Yes

EAN3220 Plus 2 MP Yes

EAN3300 Plus 3 MP No

234678910

5111

No. Item Name Descriptions

1 Memory Card Slot Insert a micro SD / SDHC card to store recording data.

2 Power LED Indicates the power is supplied.

3 DC 12V Port Connects to power.

4 Ethernet / PoE Connects to a 10/100 Ethernet or PoE.

5 Reset Button Resets all configurations to factory default.

6 I/O Terminal Block Connects I/O devices.

7 Video Out Connects to a portable monitor for setting the focus and angle

of the camera during initial installation.

8 Audio In Connects a microphone for audio input. Note that microphones

with external power supplies are required.

9 Audio Out Connects a speaker for audio output.

10 Light Sensor Detects lights.

11 Auto Iris Lens Connector Plug the iris control cable to the connector.

EAN Plus Series

System Requirements

Before installing, please check that your computer meets the following system requirements.

Operating System Microsoft Windows XP / Vista (32-bit) / 7 (32-bit)

CPU Intel Core2 Duo 2 GHz or higher

RAM

1 GB or more

Additional HD space depends on required local storage of video files,

100 Mbps network card.

Screen Resolution 1024 x 768 pixels or higher, 32-bit pixel color resolution

Software DirectX 9.0c

Microsoft Internet Explorer 7 or higher

Packing List

•EAN Plus Series Camera (lens not included) x 1

•Software CD x 1

•Quick Installation Guide x 1

•Tool Packet x 1 (contains the following items)

-C-mount lens adapter - ¼-20 UNC thread mounting bracket and 2 screws

-Hexagon wrench - Power pigtail cable

Note: Contact the shipper if any items appear to have been damaged in the shipping process. If any

items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service

Branch. Please also keep the shipping carton for possible future use.

EAN Plus Series

2. I/O Terminal Block

The I/O terminal block, located on the rear panel of the camera, can be used to develop application

for alarm input and output.

1 2 3 4

Pin Assignment

No. Function No. Function

1 Alarm COM 3 Alarm Input

2 Alarm Output 4 Digital GND

3. Installation

This installation guide provides the basic instructions on installing an EAN Plus box IP camera. For

details, please refer to the User’s Manual in the software CD.

3.1 Lens Installation and Adjustment

You can install either a CS-mount or a C-mount lens into the camera. It is recommended to use a

lens with aperture ratio of F/1.4 or smaller. Please refer to the following reference steps.

C-Mount Lens Adapter

DC Auto Iris Lens Connector

Focus Screw

Zoom Screw

CS-Mount Lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body.

3. Adjust the lens using the Focus / Zoom crews.

EAN Plus Series

If you are using a DC Auto Iris lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body.

3. Connect the DC cable to the DC Auto Iris Lens Connector.

4. When making final focus adjustment, place the ND filter (not supplied in the package) in

front of the lens to force the lens iris to open, and then adjust the lens using the Focus /

Zoom Screws.

5. Lock the Focus Screw and then remove the ND filter.

C-Mount Lens:

1. Remove the cover cap from the camera body.

2. Install the lens into the camera body using the supplied C-mount lens adapter.

3. Adjust the lens using the Focus / Zoom Screws.

Note: Installing a C-mount lens without the C-mount lens adapter may damage the camera

sensor.

3.2 Top / Bottom-Mount

You can use the supplied mounting bracket and screw it on the top of the camera body to

suspend the camera, or on the bottom of the camera body to support the camera.

Top Mount

Bottom Mount

EAN Plus Series

4. Basic Connection

Micro SD

Audio

In Out

Ethernet

(PoE)

DC 12V

Power

Reset

Video Out

COM

Out

GND

Alarm

1. Use a standard network cable to connect the camera to the network.

2. Connect the camera to power using one of the following methods:

•Plugging the supplied power pigtail cable to the DC 12V port.

•Using the PoE function and the power will be provided over the network cable.

3. Optionally connect the camera to a speaker and microphone. Note that microphones with

external power supplies are required.

4. Optionally connect the camera to a monitor using a BNC cable.

5. Optionally connect the camera to the input / output devices.

After powering the camera, the power LED will be lit in red and you can access the live view and

adjust the image clarity.

EAN Plus Series

5. Accessing the Camera

You have to assign an IP address for your camera to be accessible. To assign an IP address to the

camera, use the IP Utility (IPU) software included in the software CD. Please connect the camera in

the same LAN of your computer.

1. Install and then start the IPU program . The following dialog box appears.

2. Click Find Devices to search the cameras connected in the LAN. The default network values of

the cameras will be displayed. By default, the network protocol of the camera is DHCP.

3. To configure the network settings, select a camera and then click Login/Multi Login to log in.

4. Type the user ID and password. Click OK.

Note:

1. The default user ID is user1 and the default password is 11111111.

2. If you select more than one camera that has the same user ID / password, you will be able

to log in several cameras at once.

EAN Plus Series

5. To change the IP address, double-click the IP Address of the camera. Type a new IP address and

then click Set IP Address to save the settings.

You can also change the other settings by double-clicking the values. After configuring the

values, click Save Configuration.

Note: Most networks uses DHCP to assign IP address, if you are unsure of your network

settings, please consult your network administrators for configuration details.

6. To access the camera, highlight the camera and click Connect to Selected IP. The Internet

Explorer window pops up.

7. Type the user ID and password to log in. The Live View window of the camera appears.

Note:

1. You might be required to download ActiveX for viewing the camera feed. If asked, click Yes.

2. To enable Remove Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer,

some settings have to be complete. Please refer to 5.2 Settings for Microsoft Internet

Explorer in the User’s Manual.

EAN Plus Series

6. Network Connections

You can use one of the methods below to connect the camera to the network.

Router or LAN Connection

This is the most common connection in which the IP camera is connected to a router and allows

multiple users on and off site to see the IP camera on a LAN/WAN (Internet). The camera must be

assigned an IP address that is compatible with its LAN. By setting up port forwarding on the router,

you can remotely access the cameras from outside of the LAN via the Internet. To remotely access

the Web interface of the IP camera, please refer to 7.3.2 DDNS in the User’s Manual. To set up port

forwarding, please consult the manual of the router.

Straight-through LAN patch cable

Right: Pinout of a straight-through cable.

EAN Plus Series

Direct High-Speed Connection

In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a

router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service

Provider) in the camera’s configuration web pages. To access the camera, just type “http://xxx”,

where xxx is the IP address given by your ISP. If you have a dynamic IP address, this connection may

require that you use DDNS for a reliable connection. Please refer to 7.3.2 DDNS in the User’s

Manual.

One-to-One Connection (Directly from PC to IP Camera)

You can connect directly without using a switch, router or modem. However, only the PC connected

to the camera will be able to view the IP camera. You will also have to manually assign a compatible

IP address to both the computer and the IP camera. Unless the PC has another network connection,

the IP camera will be the only network device visible to the PC. See the diagram below:

Pinout of straight patch cable

Assign IP Address

Right: Pinout of a crossed-over cable.

Altri manuali per EAN Plus Series

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali EverFocus Telecamera IP

EverFocus

EverFocus ED230 Manuale utente

EverFocus

EverFocus EHN3261 Manuale utente

EverFocus

EverFocus EZN Plus Series Manuale utente

EverFocus

EverFocus EDN Plus Series Manuale utente

EverFocus

EverFocus EQN100 Manuale utente

EverFocus

EverFocus EMD432 Manuale utente

EverFocus

EverFocus EAN Plus Series Manuale utente

EverFocus

EverFocus ETN Series Manuale utente

EverFocus

EverFocus NeVio EDN850H Manuale utente

EverFocus

EverFocus EDN Series Manuale utente

EverFocus

EverFocus EQ610e Manuale utente

EverFocus

EverFocus EPN4122 Manuale utente

EverFocus

EverFocus EZN3261 Manuale utente

EverFocus

EverFocus EHN3261 Manuale utente

EverFocus

EverFocus EBD934Q Manuale utente

EverFocus

EverFocus EMW930 Manuale utente

EverFocus

EverFocus EZN3261 Manuale utente

EverFocus

EverFocus ED335 Manuale utente

EverFocus

EverFocus ECZ230E Manuale utente

EverFocus

EverFocus ED230 Manuale utente

EverFocus

EverFocus EPN4230d Manuale utente

EverFocus

EverFocus EZN3160 Plus Manuale utente

EverFocus

EverFocus eZ.HD Series Manuale utente

EverFocus

EverFocus EMD935F Manuale utente

Manuali Telecamera IP popolari di altre marche

FLIR

FLIR Exx series Manuale utente

Avigilon

Avigilon H4A-BO1-IR Manuale utente

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manuale utente

ShareTech

ShareTech AV1 Manuale utente

Ezviz

Ezviz C6C Manuale utente

Melchioni

Melchioni UCAM 2015 Manuale utente

Geutebruck

Geutebruck G-Cam/ESD-4630 Manuale utente

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manuale utente

Mitel

Mitel 6800i Series Manuale di servizio

Vitek

Vitek VTC-IR403-212NP Manuale utente

THOMSON

THOMSON DSC - 323W Manuale utente

AVer

AVer FB2027 Manuale utente

ENFORCER

ENFORCER EV-T5105-N2SQ Manuale utente

Wansview

Wansview NC543 Manuale utente

Eneo

Eneo MCB-64A0003M0A Manuale utente

deView electronics

deView electronics CBDNI36F Manuale utente

Swann

Swann SwannEye Manuale utente

LevelOne

LevelOne IP CamSecure Manuale utente