Everlast EPIC SPINNER Manuale utente
IMPORTANT - PLEASE
READ THESE
INSTRUCTIONS FULLY
BEFORE ASSEMBLY OR
USE
These instructions contain
important information which
will help you get the best from
your equipment and ensure
safe and correct assembly, use
and maintenance.
If you need help or have
damaged or missing parts, call
the service centre on
087 997 0865
Please keep this manual for
future reference.
MODEL NO.
EPIC SPINNER
RONS CODE
12867
www.everlastsa.co.za
Everlast/SA
everlast_sa
EPIC SPINNER
USER MANUAL
4
COMPONENT - PARTS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
IMPORTANT - PLEASE CHECK YOU HAVE ALL THE PARTS LISTED BELOW
NOTE: SOME OF THE SMALLER PARTS MAY BE PRE-ASSEMBLED TO LARGER COMPONENTS. PLEASE
CHECK CAREFULLY BEFORE CONTACTING US REGARDING ANY MISSING PARTS.
No.16
Main Frame x 1pc
No.56
Computer x 1pc
No.13
Seat x 1pc
No.18
Handlebar x 1pc
No.12
Slider x 1pc
No.4
Rear Stabiliser x 1pc
No.1L
Left Pedal x 1pc
No.17
Handlebar Post x 1pc
No.10
Seat Post x 1pc
No.15
Front Stabiliser x 1pc
No.1R
Right Pedal x 1pc
NOTE: IF YOU HAVE DAMAGED OR MISSING COMPONENTS, CALL THE SERVICE CENTRE ON 087 997 0865
5
COMPONENT - FIXINGS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
IMPORTANT - PLEASE CHECK YOU HAVE ALL THE PARTS LISTED BELOW
NOTE: SOME OF THE SMALLER PARTS MAY BE PRE-ASSEMBLED TO LARGER COMPONENTS. PLEASE
CHECK CAREFULLY BEFORE CONTACTING US REGARDING ANY MISSING PARTS.
No.3 (M8×52mm) Carriage Bolt x 4pcs
No.5 (8) Flat Washer x 4pcs
No.6 (M8) Domed Nut x 4pcs No.21 Flat Washer 1x 2pcs
No.7 (M16×1.5×20mm) Short L Elastic Latch x 2pcs No.22 (M10×25mm) Spring Adjustment Knob x 2pcs
TOOL REQUEST
Crosshead Spanner x 1pc Inner Hexagon Spanner (#5) x 1 x 1pc
NOTE: IF YOU HAVE DAMAGED OR MISSING COMPONENTS, CALL THE SERVICE CENTRE ON 087 997 0865
6
EXPLODED DIAGRAM VIEW
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
56
55
18
13
12
79
21
22
20
24
26
10
11
25
7
2
2
42
42
42
50
42
42
41
49
4
47
48
46
35
3
39
38
31
36
51
28
29
45
41
44
43
27
1R
19
6
5
6
5
8
73
73
79 21
30
33
38
19
40
58
59
60
62
77
78
60
58
76
61
63
3
15
9
14
6
5
39
34
23
35
7
16
82
32
68
37
52
53
52
52
57
64
65
66
67
69
70
74
71
72
73
75
54
29
28
1L
22
17
8
80
42
81
42
42
8
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
16
15
3
6
5
6
5
3
4
IMPORTANT - ASSEMBLE WITH ALL NUTS AND BOLTS LOOSE AT FIRST, ONLY TIGHTEN AFTER
COMPLETING ALL ASSEMBLY STEPS. UNPACK THE BOX AND PLACE ALL PARTS ON THE FLOOR.
CAREFULLY REMOVE ALL PACKING MATERIAL AND CHECK EACH PART AGAINST THE MANUAL FIRST.
REMEMBER SOME PARTS ARE PRE-ASSEMBLED TO LARGER COMPONENTS.
STEP 1
Front and Rear Stabiliser Installation
1. Attach the Front Stabiliser (15) to the Main Frame (16) using 2 pcs Flat Washers (5), Domed Nuts (6) and
Carriage Bolts (3).
2. Attach the Rear Stabiliser (4) to the Main Frame (16) using 2 pcs Flat Washers (5), Domed Nuts (6) and
Carriage Bolts (3).
9
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
16
A2
7
17
22
21
18
55
A1
56
STEP 2
Handbar and Computer Installation
1. Slide the Handlebar Post (17) into the handlebar post housing on the Main
Frame (16). Slacken the knurled section of the L Shape Knob
(7) and pull the knob back, select the desired height. Release the knob and
retighten the knurled portion.
2. Fix the Handlebar (18) using Flat Washer (21) and L Shape Knob (22).
ATTENTION: SECURE THE HANDLEBAR TIGHTLY.
3. Fix the Computer (56) onto the support tube of the Handlebar (18) using 4pcs
Screws (55). Connect the sensor wire (A1 & A2).
10
ASSEMBLY INSTRUCTIONS
For queries or additional product information, please call our Service Centre on:
087 997 0865
Please have your model name on hand.
www.everlastsa.co.za
Everlast/SA everlast_sa
16
7
10
22
21
12
13
STEP 3
Seat Installation
1. Slide the Vertical Seat Post (10) into the seat post housing on the Main Frame (16).
2. Slide the Seat Post (12) into the Vertical Seat Post (10), secure using flat washer (21) and knob (22). Slacken
the knurled section of the Knob (7) pull the knob back and select the desired height. Release the knob and
retighten the knurled portion.
3. Fix the Seat (13) to the Seat Post (12), tighten the bolts around the screws under the seat.
Indice
Altri manuali Everlast Cyclette
Everlast
Everlast EV320 Manuale utente
Everlast
Everlast FUSION EX BIKE Manuale utente
Everlast
Everlast RYDER EXERCISE BIKE Manuale utente
Everlast
Everlast 16516896 Manuale utente
Everlast
Everlast VECTOR BIKE Manuale utente
Everlast
Everlast ULTRA EX BIKE Manuale del proprietario
Everlast
Everlast 16516632-1 Manuale utente
Everlast
Everlast 16516696 Manuale utente
Everlast
Everlast 16205577260 Manuale utente
