Everycom EC801 Manuale utente

THERMAL RECEIPT PRINTER

EC801

USER MANUAL

Please read this manual carefully before using the printer,

we recommend that you keep this user manual for future reference.

ABOUT THIS USER MANUAL

We thank you for your purchase of Everycom Ec801 Thermal receipt printer.

This user manual will guide you through on how to use this printer. Please

red this user manual carefully before using the printer. We also strongly

recommend that you keep this user manual for future reference and do not

throw it away.

NOTE

Due to our constant efforts to improve and upgrade the product’s function

and performance, Everycom reserves the right to change the hardware

and software specifications in the manual without prior notice.

If you find any errors or omissions in the contents of this manual, please

tell us or our agent, we will take necessary action ASAP.

Without the prior permission of our Everycom, the contents of the relevent

manual provided with the product shall not be revised, reproduced, or

transmitted, transcribed or stored etc.

STATEMENT

This printer is TYPE A product, may cause radio interference in the living

environment, in any such possible case , the user need to take effective

protection measures from protection from interference.

SAFETY TIPS

ŸDo not disassemble the printer personally, for any service related

query please contact Everycom Support.

ŸThe printer should be installed on a flat and solid surface to avoid

vibration or impact damage to the printer.

ŸDo not store or operate printer in harsh environmental conditions such

as high temperature / humidity / pollution.

ŸMake sure power adapter of this printer is connected to a socket with,

proper grounding. Avoid connecting to a power socket which is also

being used by heavy electric product such as heavy duty motor, as it can

lead to voltage fluctuation and possibly can damage the printer.

ŸPlease only use standard power adapter as provided with the printer.

ŸMake sure printer is powered off before you plug or unplug the power

cable.

ŸPlease do not open the paper cover while printer is printing, doing so

may cause unexpected error or may even cause damage to the printer.

ŸTo avoid burn, please do not touch the print head right after the printer

finished printing.

ŸPlease do not use dissoluble substances such as Benzene, Thinner or

Alcohol wipe to clean the printer casing, also please do not let printer in

contact with corrosive chemicals and detergents to avoid damages.

ŸPlease use Everycom approved or recommended factory produced

printing paper, otherwise it may lead to poor quality print quality, and

can even damage the print head.

ŸThermal prints fade away , if you don’t want this to happen, please use

long term thermal paper.

ŸThe printer is only suitable for using below 2000M altitude.

ŸThe printer is only suitable for use in non-tropical reason/climates.

APPLICATION AREA

ŸPoint of Sale ( POS ) at Supermarket, Restaurant, Coffee shop etc

ŸCatering Industry Bill Printing

ŸReceipt printing at Toll Station, Petrol Pump, Hospital, Sport Center etc

ŸToken printing at service station, utility bill payment etc

ŸTax bill printing and much more..

PRODUCT FEATURES

Ÿ300mm/second ultra high speed printing.

ŸExcellent waterproof, Anti-oil, Anti-dust structure design.

ŸWall mountable

ŸAdjustable baffle design, support for both 58mm & 80mm paper size

printing.

ŸSupport 80mm large diameter roll.

ŸSupport Gb18030 big font, easy to print uncommon characters.

ŸCompatible with ESC/POS instruction set

ŸEasy paper loading, simple and convenient to operate

ŸSupport kitchen printing and Internet printing.

ŸSupport printer monitoring function to avoid losing bills.

Ÿ100M Ethernet Card ( Optional ) gives high speed connectivity to printer

and increases efficiency of the printer.

ŸSupport printing Job recovery after network disconnection.

Ÿ2048K Super input buffer memory.

ŸSupport LOGO graphic download and print.

ŸSupport 1D, 2D Barcode printing.

ŸSupport incoming order reminder and error alarm.

ŸSupport black mark orientation and re-print large font.

ŸSupport multi-language printing

ŸRich optional interfaces available, SERIAL COM, Rj45 LAN, WIFI,

BLUETOOTH, GPRS

WHAT’S IN THE BOX

Ÿ1 X Everycom EC801 Thermal Receipt Printer

Ÿ1 X Powe Adapter ( Including Power Cable )

Ÿ1 X USB Data Cable

Ÿ1 X Paper Roll

Ÿ1 X User Manual

Ÿ1 X Driver CD

Item Parameters

Parameters

Printing Method Thermal Line

Printing width 72mm

Resolution 576 Dots/Line or 512 Dots/Line（8dots/mm,203dpi）

Print speed 300mm/Second

Interfaces Ethernet +USB+COM , Ethernet+USB+WIFI, USB+GPRS,

USB+COM, USB+Bluetooth.

Line Spacing 3.75mm（Can adjust line spacing by command）

Line No. Font A : 48 Characters/Lines

Font B : 64 Characters/Lines

Simple/Traditional Chinese-24 lines

Character Standard GB18030 simplified / traditional Chinese Fonts

Character Size ANK character, Font A:1.5×3.0mm（12×24 dots）;Font

B:1.1×2.1mm（9×17 dots）

Simplified/Traditional

Chinese3.0×3.0mm(24×24 dots)

Bar code

Character

Extended character

set

PC437/Katakana/PC850/PC860/PC863/

PC865/West Europe/Greek/Hebrew/

East Europe/Iran/WPC1252/PC866/PC852/

PC858/Iran/Latvian/Arabic/PT151,1251/

PC737/WPC/1257/Thai Vietnam/PC864/

PC1001/(Latvian)/(PC1001)/(PT151,1251)/

(WPC1257)/(PC864)/(Vietnam)/(Thai)

Bar code 1D Bar Code：UPC-A/UPC-

E/JAN13(EAN13)/JAN8(EAN8)/CODE39/ITF/CODABAR/

CODE93/CODE128

2D Bar Code : QR CODE

Graphics

printing

Graphics printing Supports bitmap download and print

Cutter Cutter Function Full cut/Half cut

Paper

Type Thermal

Width 79.5±0.5mm

Diameter ≤80mm

Feed method Easy feed (Clamshell feed)

commands

Commands ESC/POS

Power

Power Adaptor Input：AC 100V-240V,50～60Hz

Output：DC 24V/2.5A

Cash Drawer output DC 24V/1A

Buffer Input Buffer 2048K bytes

NV Flash 256K bytes

Physical

Characteristics

Weight 1.2KG

Dimension 186*145*133(MM)

Environment Working Temp：5 ~ 45 ℃， Humidity：10 ~ 80%

Storage Temp：-10 ~ 50 ℃，Humidity：10 ~ 90% (No dew)

Reliability

parameter

Print Head Life 100KM（print density ≤12.5）

Cutter Life 1000,000times

Software Driver Android,IOS,Linux,Win2000,Win2003,WinXP,Win7,Win8,

Win8.1

TECHNICAL SPECIFICATIONS

HOW TO : PRINTER CONNECTION

1. Connect the power adapter cable to the printer power supply interface.

2. Connect the USB data cable to the printer’s USB interface.

3. If you have cash drawer, connect its cable to printer’s RJ11 interface.

Power Adaptor

Power Cable

HOW TO : LOAD PAPER

1. Press the cover open button situated on the left side of the printer.

2. Put the paper roll inside the paper holder as shown in the image below.

3. Pull out paper just a little that it comes out of printer.

4. Press the cover down to close it, tear off excess printing paper.

Note : Be careful on the roll

direction, if reverse

direction , printer won’t be

able to print the content.

HOW TO : SET PRINT MODE ( DIP SWITCH )

DIP switch can be used to settings such as change the Auto cutter mode,

enable / disable beep, Printing density, language selection, font size, print

width, print speed etc..

DIP SWITCH SETTINGS

SWITCH, KEY NAME, INDICATOR & FUNCTIONS

1. (POWER) SWITCH

Use this switch to turn on or off the printer.

2. (FEED) KEY

This button is used to feed paper.

3. (PAPER) LIGHT

If paper light is on and stable indicates that printer have paper loaded.

If paper light is on and stable but “Error” light is flashing, this means that

printer is out of paper.

4. (ERROR) LIGHT

If printer is out of paper, print head overheating or if the printer lid is not

closed properly or upon any other similar irregularities this light will be

flashing. Else it will be off.

5. (POWER) LIGHT

Power light on and stable indicates printer is connected to power supply

and is powered on, if this light is off that indicates printer is powered off.

HOW TO : PERFORM SELF TEST

If printer is powered on, kindly power it off using the power switch on the

back panel.

Press the feed key and power on the printer at the same time using the

power switch on the back panel. ( Do not release the feed key yet )

After approximately 2 seconds release the feed key and printer will print

out the current printer status and settings.

HOW TO : HEX NUMBER SYSTEM

If printer is powered on, kindly power it off using the power switch on the

back panel.

Press the feed key and power on the printer at the same time using the

power switch on the back panel. ( Do not release the feed key yet )

After approximately 6 seconds release the feed key and printer will print

out the words “Dump Hexadecimal”.

HOW TO : RESTORE FACTORY DEFAULT SETTINGS

If printer is powered on, kindly power it off using the power switch on the

back panel.

Press the feed key and power on the printer at the same time using the

power switch on the back panel. ( Do not release the feed key yet )

After approximately 10 seconds release the feed key and printer settings

will be restored to factory default.

HOW TO : FIX STUCK AUTO CUTTER

Solution 1 : Restart the printer by turning it off and then turning it back on

using the power button on the back panel.

Solution 2 : Turn off the printer using the power button on the back panel,

Open the front printer cover ( as shown in image below ) rotate the auto

cutter’s cutting knife gear, let the cutter return to its initial position. Once

done close the printer cover and turn on the printer using power button on

the back panel. Resume printing.

HOW TO : INSTALL PRINTER DRIVER

This printer have two driver modes , one uses port for directly drive printing

and another requires to install driver in windows system to print.

1. Direct Drive

In this method driver installation is not required. Only need to output the

characters ( Instructions and data ) directly to a port.

If you use direct drive mode, you need to use the print command set to

control printing. This printer has been integrated within the ESC/POS

instruction set.

1. Install Driver ( Windows )

Insert the driver CD into the CD drive of your computer. Look for windows

driver and double click to initiate the setup, follow the instructions

displayed on the computer and your printer will be ready to use in no time.

HOW TO : REPAIR & MAINTENANCE

1. Printer casing & paper holder cleaning : Use a wet cloth gently wipe the

outer surface and paper holder of the printer.

2. Print core cleaning : Printer core should be cleaned time to time

especially if the printing quality is declining, cleaning method is as follows.

Use clean cotton dipped in anhydrous alcohol and gently wipe the printer

core ceramic part until clean enough.

3. If notice water inside the printer, please immediately disconnect the

power supply of printer and let the printer dry out naturally.

Everycom POS - 80mm Series.exe

Indice

Altri manuali Everycom Stampante

Everycom

Everycom EC58 Manuale utente

Everycom

Everycom EC300 Manuale utente

Everycom

Everycom EC801B Manuale utente

Everycom

Everycom EC400 Manuale utente

Everycom

Everycom EC200 Manuale utente

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente