Exalux CONTROL TOUCH Manuale utente
USER MANUAL
MANUEL UTILISATEUR
CONTROLTOUCH
EN
FR
CONTROL HUB
2
DMX universe :
Interface :
Power input :
DMX in/out :
Triggers in :
Relay out :
Input voltage :
Power rating :
IP Rating :
Certications :
Dimensions :
Weight :
1
DMX (DMX512-A), CRMX™ by LumenRadio™
2 position terminal block, 3.81mm
3 position terminal block, 3.81mm
3 position terminal block, 3.81mm
4 position terminal block, 3.81mm
24VDC
1,2W max (without HMI)
7W max (with 2 HMI)
IP2X
CE, RoHS
88 x 90 x 32.5mm
125g
(A): DC input (B): DMX input (C): DMX output (D): Reset switch
(E): X-LINK ports (F): DIN rail mount (G): Trigger inputs (H): Relay outputs
(I): USB-A port (J): MicroSD slot (K): Antenna (SMA mount)
SPECIFICATIONS
[A]
[F]
[G]
[B]
[H]
[E]
[K]
[J]
[D]
[I]
[C]
EN
FR
CONTROL HMI 5’’
3
Display :
DMX universe :
Power / data Input:
Input voltage :
Power rating :
IP Rating :
Certications :
Dimensions :
Weight :
TFT 5.0’’, 480x854, Capacitive Touch
1
RJ45 (X-LINK port)
7.0VDC to 30VDC
2,1W max
IP4X
CE, RoHS
76.2 x 139.4 x 24.8mm
130g
(A): Proximity sensor (B): 5'' Capacitive display (C): Wall mount enclosure
(D): X-LINK Port (E): MicroSD slot
SPECIFICATIONS
[A]
[B]
[C]
[D]
[E]
EN
FR
The HOME screen is the main interface to use once the system has been
configured. It allows simple control of the lights using the programmed memories.
HOME
4
Home off screen
Home about screen
Shows the current time and
date, in 12h or 24h format.
The clock and calendar are
setup in the SYSTEM app.
Thanks to an internal backup
battery, the clock will not be lost
in case of power down.
Touch anywhere on the display
to go back to the HOME screen.
Touch anywhere on the display
to go back to the HOME screen
and turn on the lights using the
programmed memories.
Versions of all the software
components loaded in the
system.
Current firmware version of the
CONTROL HUB, CONTROL HMI,
DMX profiles library and number
of CONTROL HMI connected.
EN
FR
The HOME screen is the main interface to use once the system has been
configured. It allows simple control of the lights using the programmed memories.
HOME
5
Home sequences screen
Home scenes screen
Opens the MENU, in order to
access all the apps to configure
the system.
Touch the buttons to select the
memory to apply.
The memory currently in use is
highlighted in yelllow.
Opens the ABOUT screen, in
order to read the firmware
version.
Countdown of the remaining
duration until the end of the
sequence.
Navigation tabs, used to
switch between scenes (static)
and sequences (dynamic)
memories.
If only one type of memory is
used, the tabs are hidden.
Switch off all the lights.
Controls for the sequences
player (Play, Pause, Stop).
Once a sequence ends, it
automatically restarts if the loop
option is selected.
EN
FR
Menu is the entry point to select which app you want to use. Its access can be
restricted by a pin code, to prevent unauthorized user to access the settings.
MENU
6
LIGHTING CONTROL
Choose the lighting fixture from
the library and adjust its settings
using the sliders on the screen.
RECORDER
Transfer your settings from another controller
to the CONTROL TOUCH with the DMX recor-
der,using the DMX input of the HUB interface. DMX BYPASS
Provides a secured way to
control DMX fixtures, using an
external DMX controller. The
DMX received on the input port
is forwarded to the DMX output
and CRMX.
PROGRAM
Allows to program automated behaviours,
based on specific time & date, or from the
trigger inputs of the CONTROL HUB.
MEMORY NAMES
Use this app to enter meaningful
names for your memories, in
order to get the most intuitive
HOME screen possible.
SYSTEM
Provides advanced control of
the CONTROL TOUCH’s settings,
including: display brightness,
CRMX control, memory import/
export, reset, ...
HOME
Back to HOME screen.
EN
FR
Provides advanced control of the CONTROL TOUCH’s settings,including : display
brightness, CRMX control, memory import/export, reset, ...
SYSTEM
7
Switch between the tabs to access all
the settings available.
Adjust the brightness of the display,
and select the inactivity behaviour.
This behaviour is only applied on the
HOME screen.
Select the crossfade duration to apply
when switching between two SCENE
memories on the HOME screen.
Select the radio output power, which
maximum can be limited by local
regulation.
EXALUX recommands keeping the
default setting (20dBm/100mW).
When PIN CODE is enabled,the access
to the MENU will only be allowed if the
user enters the expected pin code.
This feature can be used to prevent
unauthorized users to access settings
and/or modify memories.
Default pin code : 0000
Individual resets and factory reset
(hold button 3 seconds).
Enable or disable wireless operations
(CRMX). Link/unlink CRMX devices.
The import/export feature allows to
save/restore all the memories and
settings on an external USB stick,
plugged in the CONTROL HUB.
Clock and calendar setup.
EN
FR
Choose the lighting fixture from the library and adjust its settings using the sliders
on the screen.
FIXTURE CONTROL
8
Overview of all the DMX
channels used by the fixtures.
Adjust the fixture settings
using the sliders.
Summary of the parameters of
the selected fixture.
The RELAY page provides control
of the two internal relay outputs
of the CONTROL HUB.
Select the fixture to control (60
fixtures maximum).
Long press on the tab of the
selected fixture to enter a
custom nickname.
A fixture already in use is marked
with a yellow triangle.
Back to MENU.
Opens the zone adjustment
and memory saving page.
Opens the fixture setup page,
in order to choose the fixture
parameters:
•Type of fixture,from the library
• DMX address
• Zone
EN
FR
The FIXTURE SETUP screen is used to choose all the parameters of a fixture.The
ZONES & MEMORIES screen provides zone adjustment and memory management.
FIXTURE CONTROL
9
Fixture setup screen
Zones and memories screen
Assign a zone to the fixture.
The brightness of each zone can
be controlled on the dedicated
page (see below).
Enter the DMX address of the
fixture.
The address should match the
one set on the fixture itself.
If no address is specified, the
system will automatically assign
the first address available.
Grand master: adjust the
brightness of all fixtures
(independently of their zone
selection).
Zone adjustment: control the
brightness of all the fixtures
assigned to the zone.
Pick a memory to unlock its control:
•Erase: deletes the memory’s content.
•Save: saves all the current settings
(including zones and grand master).
•Apply: restores a saved memory.
Saves all the settings made and
go back to the main window.
Thememorystateisdefinedbyitscolour:
•Yellow: Memory currently selected.
•Grey: Memory is free, ready to be used.
•White: Memory already used.
Enable / Disable the fixture.
Go back to the main window ignoring
any changes made.
Select the profile of the fixture to
control, from the DMX library.
Using the navigation arrows,select the
brand, then select the fixture + mode.
EN
FR
Provides a secured way to control DMX fixtures,using an external DMX controller.
The DMX received on the input port is forwarded to the DMX output and CRMX.
DMX BYPaSS
10
INFO
• This app can be used as backup,in order to still be able to control DMX fixtures,
even if no memorie has been programmed, or if the touch screen is faulty.
• When a CONTROL HUB is installed without any HMI (touchscreen),it automatically
enters «standalone mode»,providing the same behaviour than in the DMX BYPASS
app.
Visual diagram of the operations.
Any DMX frame received on the
DMX input is forwarded to DMX
output.
If the wireless feature is enabled,the
DMX is also generated on CRMX.
Refer to SYSTEM for details on how to
enable CRMX.
Back to MENU.
Shows the state of the
DMX input.
EN
FR
Indice
Lingue:
Altri manuali Exalux Telecomando
