Experia Aurora Manuale utente
- 1 -
Aurora LED
Projector
Instruction Manual
For optimal results, please read and follow
instructions carefully
Please keep for future reference
3+ years
WARNING:
CHOKING HAZARD – Small Parts
Not suitable for children under 3 years.
- 2 -
Congratulations on the purchase of your new Aurora LED projector!
The Aurora LED Projector has been designed specifically for people with special
needs and should, if used in accordance with these guidelines, offer years of fun!
The Aurora LED Projector offers interaction, calming, relaxation, theming and
storytelling opportunities depending on the wheels used.
It uses a Super Bright LED (over 4000 lumens) and produces extremely bright
effect wheels projection.
It is incredible easy to use, simply place on a table or mount securely on a wall,
connect to an electrical outlet and switch on, put simply, this unit is plug and play.
Please ensure you read and follow these Instructions carefully before
installing or operating the unit. Please keep this manual for future
reference.
Heed all warnings on the product and within this manual. If upon receipt of this
product, the user suspects that the product is defective, and/or requires service
or repair due to malfunction or damage to the product, please contact the
manufacturer immediately. Please be aware that improper installation and/or use
or misuse of this product may result in injury, death, or adverse reactions to its
user. This product is intended to be installed and/or use by a trained
professional. Failure to comply with these precautions or with specific warnings
elsewhere in this manual violates safety standards of design, manufacture, and
intended uses of the product.
Features
Ergonomic Design
Low Noise Level
Latest LED Technology
No Lamp Change – LED
Environmentally friendly – 3 x as efficient as lamp based products
Cool Running
Low Voltage – transformer supplied
Low maintenance
Durable
Easy to use
Study desktop stand
Floor, wall or ceiling mountable
Easy to Use
Works with all standard accessories
Designed for all ages and abilities
- 3 -
3 Year Manufacturers Guarantee (Collect and Return)
Pack contents
1 x Aurora LED Projector
1 x Low Voltage Transformer
1 x IEC Lead
Getting Started
1. Place the Aurora LED Projector on a flat solid surface or mount securely
on a wall.
2. Connect the low voltage transformer connector to the socket on the back
of the unit.
3. Connect the standard mains plug to a mains outlet.
4. Switch on the unit using the switch on the back of the unit.
5. The unit will now illuminate.
Fitting a Wheel Rotator & Effects Wheel
To enable images to be projected from the unit you will need to fit a wheel rotator
and effects wheel – this is easily done.
1. Firstly, locate your wheel rotator and choose the effect wheel you wish to
use.
2. Remove both items from packaging. You will notice that on the front of the
wheel rotator there is a metal spindle. You will notice on back of the
effects wheel there is a plastic receptacle in the centre of the wheel. Push
the receptacle onto the metal spindle.
3. Looking at the projector you will see a slot towards the front of the unit. In
here you will see 2 gates: Slide the wheel rotator into the gate nearest the
back of the projector and connect the plug to the socket underneath.
- 4 -
4. Switch the unit on, the wheel should now rotate.
5. If the image that is being projected is blurred then simply adjust the black
focusing lens on the front until it becomes clear.
If you are still not sure then visit our website at www.experia-
innovations.co.uk and look in the Projector section or visit our YOUTUBE
channel – ExperiaInnovations.
Please note: Only use the transformer supplied. Use of a different
transformer may result in damage to the product and void the warranty.
For warranty information please see separate warranty card supplied.
Cleaning and Maintenance
The unit should be cleaned with a damp soft cloth. A non abrasive cleaning agent
may be used for stubborn stains. Ensure no liquid enters the base of the unit.
The unit has been designed for use by people with special needs, however this
does NOT mean it is unbreakable. You must ensure the unit is not hit with
anything and that no one pulls or pushes the unit.
Lamp Change
Not required! It uses an LED which lasts for years!
Please note: the maximum ambient room temperature in which this unit will
operate normally is 27ºC.
Troubleshooting
Q. The unit doesn’t work.
A1. Is it connected to the mains using the correct transformer? If so,
A2. Is it switched on using both switch at the back of the unit and switch on
electrical outlet? If so,
A3. Please contact us for further assistance.
- 5 -
Q. The image is blurred.
A1. Adjust the black lens on the front of the unit until the image is clear.
Contact Details
For Canada please email support@experia-canada.com
For UK and rest of the world email support@experia-innovations.co.uk
Telephone: 0044 (0) 845 644 0977.
Please note: email is our support teams preferred communication and this takes
precedence over telephone calls.
QUESTIONS & IDEAS?
If you have an idea on how to improve this product or want to see your product idea
All ideas are presented to our OT, technical and finance department and if all
procedures are passed we will contact you to discuss your idea further.
We can’t promise to develop every product but if it’s a great idea, we’ll try!
Manufactured proudly in the UK by:
Experia, Lydia Pinkham House, 3 Spring Hill Road, Park Springs, Barnsley, South
Yorkshire, S72 7BQ.
© Copyright 2010-2012 Experia All rights reserved. Experia is a registered trademark.
Indice
Altri manuali Experia Proiettore
