Exsys EX-3517R Manuale utente

1

Thank you for purchasing this 4-Port SATA3 RAID PCI PCIe Card. It is designed to

support up to 4 SATA3 ports with a built-in SATA3 RAID controller. It supports 4

SATA3 hard drives (or SSD) over one single PCI Express Slot and provides hardware

RAID 0, 1, 10, 3, 5 modes for your system.

Features:

✓Supports 2-lane PCIe Gen 2 up to 10Gb/s

✓Provides 4 Internal SATA3 Drives with 2 Double Deck Connectors

✓Supports Hardware RAID 0, 1, 10, 3, 5 Modes

✓Supports Low Profile Form Factor

✓Supports SATA3 transfer rate at 6.0Gb/s

✓Provides Windows RAID GUI for RAID Management

✓Co-resides with Motherboard IDE and SATA devices

✓Supports Win 2003, 2008, XP, Vista, Win 7, 8.x, 10,

Linux and Mac OS

EX-3517R

4-Port SATA3 Hardware RAID PCIe (x2) Card

1. Introduction

2. Board Layout

Low Profile

Bracket

Up: Port 2

Down: Port 1

Up: Port 4

Down: Port 3

Gen 2 PCIe (x2)

Golden Fingers

4-Port SATA3 Hardware RAID PCIe (x2) Card

2

1. Power down the peripherals, then the computer.

2. Remove the computer cover and save the screws.

3. Choose an unused PCI Express bus slot.

4. Unscrew and remove the slot cover. Retain the screw; you will use it when you

install the SATA3 PCIe RAID Card.

5. Place the SATA3 PCIe RAID Card into the slot. Carefully press the board into

the slot until it seats firmly.

6. Secure the SATA3 PCIe RAID Card with the slot cover screw.

7. Install the internal SATA cables from the SATA connectors of the PCIe RAID

Card to your SATA hard drives.

8. Carefully reinstall the computer cover. Insert and tighten the computer cover

screws.

9. Power up the PC and observe the monitor. The BIOS lists all Serial ATA hard

drives attached to the SATA3 PCIe RAID Card. For example:

If the information displayed on your screen is correct (the installed devices are

listed with the correct device name, etc.), congratulations! You have

successfully installed the SATA3 PCIe RAID Card in your computer.

3. Hardware Installation

Asmedia 106x SATA Controller Ver 1.50 AHCI Mode

Copyright (C) Asmedia Technologies, Inc. All Right

reserved. S.M.A.R.T. Supported

Using PCIE Gen2 x2

Firmware version 150910_00_00_00

Port PMP Model

0 0 KINGSTON SHFS37A120G SATA3

4 0 KINGSTON SHFS37A120G SATA3

5 0 ST3000DM001-9YN166 SATA3

6 0 ST3000DM001-9YN166 SATA3

4-Port SATA3 Hardware RAID PCIe (x2) Card

3

The SATA3 PCIe RAID Card supports Advanced Host Controller Interface (AHCI)

mode which gives software developers and hardware designers a standard method

for detecting, configuring, and programming SATA/AHCI adapters. It exposes

SATA's advanced capabilities (such as hot swapping and native command queuing)

so it does not need extra drivers for the modern operating systems. The following

table lists the operation system supported:

Operating Systems

Support

Windows Server 2012

Yes

Windows Vista (x86, x64)

Yes

Windows 7 (x86, x64)

Yes

Windows 8.x (x86, x64)

Yes

Windows 10.x (x86, x64)

Yes

Mac OS

Yes

Linux Based

Yes (with Kernel 2.6.19 or later)

The PCIe RAID Card hardware has two portions, one is the PCIe to SATA3

host interface which supports AHCI mode. The other is a SATA3 hardware

RAID controller which combines the 4 SATA3 hard drives to specific RAID

mode by the RAID GUI management utility.

4. Software Installations Win2000/XP/2003/Vista/Win7

Installation

4-Port SATA3 Hardware RAID PCIe (x2) Card

4

Install the Hardware RAID Management Utility:

1. Insert the driver DVD, run the setup.exe file on the DVD (as

administrator), the location of the setup.exe file as follows:

\SATA_RAID\JMB390\Windows_Utility

4-Port SATA3 Hardware RAID PCIe (x2) Card

5

2. Follow the onscreen instructions until the installation is completed.

3. After reboot, you can run it by click its application icon in the notification tray

located at the bottom right corner of the screen or simply double-click the

short-cut icon on the desktop.

4. To make sure the HW RAID Manager to be always executed as administrator

privilege, please right-click on the “JMicron HW RAID Manager”short-cut icon

on the desktop, choose “Properties”, click “Compatibility” tab, enable the

“Run this program as an administrator” option of the privilege level then

click OK. Please see the following screen shot:

4-Port SATA3 Hardware RAID PCIe (x2) Card

6

Once JMB39X HW RAID Manager is launched, the JMB39X HW RAID Manager GUI

window will be opened. For the consideration of different user experiences and

achieving the ease of navigation, the main GUI is divided into two modes (“Basic

mode” and “Advance mode”).

Basic Mode: Click the following buttons to do basic RAID configuration and

browse all disks and RAID information as well as the event logs:

Advanced Mode: It provides 3 buttons for Email Notification and Event

Settings, advanced RAID Configuration and Firmware Update:

5. Using JMB39X HW RAID Manager

4-Port SATA3 Hardware RAID PCIe (x2) Card

7

Note: For detail operations of configuring your disk array with the RAID

Manager, please read the JMB39X Raid manager user guide.pdf file included in the

same folder as the software.

4-Port SATA3 Hardware RAID PCIe (x2) Card

8

Indice

Altri manuali Exsys Scheda PCI

Manuali Scheda PCI popolari di altre marche

ERMA

ERMA SSI 1417 Manuale utente

SIIG

SIIG CyberSerial Dual PCI Istruzioni per il montaggio

Moxa Technologies

Moxa Technologies CP-102E Manuale utente

I-Bus

I-Bus IBC2602 Manuale utente

Chelsio Communications

Chelsio Communications T5 Series Manuale utente

Conrad Electronic

Conrad Electronic 97 46 71 Manuale utente

Micro Innovations

Micro Innovations USB650A Manuale utente

KTI Networks

KTI Networks KF-310 Manuale utente

Asus

Asus SpaceLink WL230 Manuale utente

SIIG

SIIG SC2475 Manuale utente

TRENDnet

TRENDnet TEW-703PI Manuale utente

Belkin

Belkin F5D7000F Manuale utente

Pericom

Pericom PI7C7100 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-3548 Manuale utente

Digium

Digium TE200 Series Manuale utente

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuale utente

Western Digital

Western Digital FireWire PCI Adapter Manuale utente

Pyle

Pyle Gamelink PLINK1 Manuale utente