Exsys EX-6072-4K Manuale utente

1

Thank you for purchasing this Dual Channel Gigabit Ethernet PCI Express Card with

4KV Isolation. It is the fastest LAN host adapter available in the market that is

specially designed to connect dual channel 4KV isolated gigabit LAN channels to

any computer with PCIe (PCI Express) slots. It supports crossover detection and

auto-correction feature for the easy network cabling.

Features:

✓Fully PCI Express Base Specifications 1.1 Compliant

✓Supports Dual 4K VAC Gigabit Ethernet Ports over a PCIe Switch

✓Supports Full Duplex Flow Control (IEEE 802.3x)

✓Fully Compliant with IEEE 802.3 IEEE 802.3u, IEEE 802.3ab

✓Supports IEEE 802.1Q VLAN tagging, Crossover Detection & Auto-Correction

✓Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation

Task-offload (Large send v1 and v2) support

✓Supports Jumbo Frame to 9K bytes

✓Supports Win98SE, ME, 2K, XP, XP64, Vista, Win7, 8.x, 10 and others

EX-6072-4K

Dual Channel Gigabit Ethernet PCIe Card,

w/ 4KV Isolation

1. Introduction

2. Board and Bracket Layout

Short bracket will be

assembled if the low profile

model is shipped

RJ45 Connectors:

CH2 CH1

CH2 CH1

LINK (ACT) LEDs

Dual Channel Gigabit Ethernet PCIe Card, w/ 4KV Isolation

2

Due to the hot-plug feature of the PCI Express, the installation of the PCIe Dual

Channel Gigabit Ethernet card is quite straightforward.

1. Turn the system power OFF before installation!

2. Use static electricity discharge precautions. To avoid damaging any

components on the card, handle it by edges.

3. Remove the chassis cover from your computer

4. Locate an unused PCI Express slot (typically white and smaller) and remove

the corresponding slot cover from computer chassis.

5. Plug the Dual Channel Ethernet PCIe card to the unused PCI Express

expansion slot and attached the I/O card bracket to the computer chassis

screw.

6. Put the chassis cover back on the computer.

7. Turn ON the power of your computer and peripherals.

8. Proceed with Software Driver Installation.

9. Installing LAN cables

Each RJ45 has its corresponding LED indicator. Connect the Cat5 LAN cables

to both RJ45 connectors. The corresponding ‘LINK(ACT)’LED will light if link is

on. The same LED will flash when transferring data. This following table lists

the LEDs’definition:

LED Name

Color

LED Function

LINK(ACT)

Green

Steady on: Linked

Blinking: Transferring Data

3. Installing the Gigabit Ethernet PCIe Card

Dual Channel Gigabit Ethernet PCIe Card, w/ 4KV Isolation

3

The Gigabit Ethernet drivers are shipped in the following folder of the driver CD.

Please browse to the corresponding driver folder when Windows ask you to specify

the driver location. Then follow the on-screen instructions of the Windows to

complete the installation.

You can use Device Manager to check the installation. Here are the screen shots

showed you that it was installed correctly:

4. Windows Driver Installation

Dual Channel Gigabit Ethernet PCIe Card, w/ 4KV Isolation

4

2 Gigabit Ethernet

ports shown here

PCI-to-PCI bridge

devices appeared

Indice

Altri manuali Exsys Scheda PCI

Manuali Scheda PCI popolari di altre marche

ERMA

ERMA SSI 1417 Manuale utente

SIIG

SIIG CyberSerial Dual PCI Istruzioni per il montaggio

Moxa Technologies

Moxa Technologies CP-102E Manuale utente

I-Bus

I-Bus IBC2602 Manuale utente

Chelsio Communications

Chelsio Communications T5 Series Manuale utente

Conrad Electronic

Conrad Electronic 97 46 71 Manuale utente

Micro Innovations

Micro Innovations USB650A Manuale utente

KTI Networks

KTI Networks KF-310 Manuale utente

Asus

Asus SpaceLink WL230 Manuale utente

SIIG

SIIG SC2475 Manuale utente

TRENDnet

TRENDnet TEW-703PI Manuale utente

Belkin

Belkin F5D7000F Manuale utente

Pericom

Pericom PI7C7100 Manuale utente

ADLINK Technology

ADLINK Technology cPCI-3548 Manuale utente

Digium

Digium TE200 Series Manuale utente

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuale utente

Western Digital

Western Digital FireWire PCI Adapter Manuale utente

Pyle

Pyle Gamelink PLINK1 Manuale utente