Extron electronics DTP CrossPoint 84 Manuale utente

68-2349-50 Rev. E

01 20

DTP CrossPoint 84

Scaling Presentation Matrix Switchers with DTP Extension

Matrix Switchers

IMPORTANT:

Refer to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

IMPORTANT:

Refer to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

Setup Guide

Safety Instructions



NOTE:For more information on safety guidelines, regulatory compliances,

EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and

Regulatory Compliance Guide” on the Extron website.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks, registered service marks, and trademarks are the

property of RGB Systems, Inc. or Extron Electronics (see the current list of trademarks on

the Terms of Use page at www.extron.com):

Registered Trademarks(®)

EExtron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager,

EDID Minder, FlatField, FlexOS, Glitch Free, GlobalConfigurator, Global Scripter,

GlobalViewer, Hideaway, HyperLane, HyperLane, IPIntercom, IPLink, KeyMinder,

LinkLicense, LockIt, MediaLink, MediaPort, NetPA, PlenumVault, PoleVault, PowerCage,

PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch,

StudionStation, SystemINTEGRATOR, TeamWork, TouchLink, V‑Lock, VersaTools,

VN‑Matrix, VideoLounge, VoiceLift, WallVault, WindoWall, XPA, XTP, XTPSystems, and

ZipClip

Registered Service Mark(SM): S3 Service Support Solutions

Trademarks(™)

AAP, AFL (Accu‑RATEFrameLock), ADSP(Advanced Digital Sync Processing),

Auto‑Image, AVEdge,CableCover, CDRS(ClassDRippleSuppression), DDSP(Digital

Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,

DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, EverLast,

FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, Opti‑

Torque, PendantConnect, ProDSP, QS‑FPC(QuickSwitch Front Panel Controller), Room

Agent, Scope‑Trigger, SIS, SimpleInstructionSet, Skew‑Free, SpeedNav, Triple‑Action

Switching, True4K, True8K, Vector™ 4K, WebShare, XTRA, and ZipCaddy

 

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a

Class A digital device, pursuant to part15 of the FCC rules. The ClassA

limits provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause interference. This interference must be

corrected at the expense of the user.

ATTENTION: The Twisted Pair Extension technology works with

unshielded twisted pair (UTP) or shielded twisted pair (STP) cables;

but to ensure FCC Class A and CE compliance, STP cables and STP

Connectors are required.

For more information on safety guidelines, regulatory compliances,

EMI/EMF compatibility, accessibility, and related topics, see the

“Extron Safety and Regulatory Compliance Guide” on the Extron

website.

Conventions Used in this Guide

Notifications

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C

[01] R0004 00300 00400 00800 00600 [02] 35 [17] [03]

EX! *X1&*X2)*X2#*X2! CE}

NOTE: For commands and examples of computer or device

responses mentioned in this guide, the character “0” is used for the

number zero and “O” is the capital letter “o.”

Computer responses and directory paths that do not have variables are

written in the font shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32

C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t

SOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and

eld names are written in the font shown here:

From the File menu, select New.

Click the OK button.

Speciﬁcations Availability

Product specications are available on the Extron website,

www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/

glossary.aspx.

DTP CrossPoint 84 • Contents vii

Introduction.............................. 1

About this Guide ........................... 1

About the DTP CrossPoint

Matrix Switchers .......................... 1

DTP Input and Output Signals .. 3

Installation................................ 4

Rear Panel..................................... 4

Video Inputs and Outputs ......... 5

Audio Inputs and Outputs ......... 6

Serial and IR Insertion

Connections ............................. 7

Control Connections ................. 7

Switcher Reset .......................... 8

Power ........................................ 8

Additional Connector

Information ............................... 9

Front Panel .................................. 14

Front Panel Operations......... 15

Creating a Tie .............................. 15

Recalling a Preset ....................... 16

Viewing Ties (and Muting

Outputs) ..................................... 16

Viewing and Adjusting Volume

and Mic Volume ......................... 16

Setting the Front Panel Locks

(Executive Modes) ..................... 17

Selecting Lock Mode 2 or

Toggling Between Mode 2

and Mode 0 ............................ 17

Selecting Lock Mode 2 or

Toggling Between Mode 2

and Mode 1 ............................ 18

Remote Control ..................... 19

Selected SIS Commands ............ 19

Establishing a Network

(Ethernet) Connection ............ 19

Number of Connections .......... 20

Establishing a USB Port

Connection............................. 20

Host-to-Switcher

Instructions............................. 20

Common SIS Command

Symbols ................................. 20

SIS Command and Response

Table for Matrix Switcher

Commands............................. 21

Installing and Starting the

Control Programs....................... 26

Installing the programs............ 26

Starting the Product

Conguration Software .......... 28

Starting the DSP Congurator

Program.................................. 29

Accessing the HTML Pages........ 31

Contents

DTP CrossPoint 84 • Contentsviii

DTP CrossPoint 84 • Introduction 1

Introduction

This section gives an overview of the Extron DTP CrossPoint 84 Series

matrix switchers and describes their features. Topics that are covered

include:

• About this Guide

•About the DTP CrossPoint Matrix Switchers

About this Guide

NOTE: For more information on subjects in this guide, see the DTP

CrossPoint 84 Series User Guide and the IPCP Pro Series User Guide

available at www.extron.com.

This guide provides instructions for an experienced installer to set up

and operate the Extron DTP CrossPoint 84 Scaling Presentation Matrix

Switchers with DTP Extension. Step by step instructions show you how to:

• Connect the hardware (see Installation on page4)

• Perform basic operations (see Front Panel Operations on page15)

• Use both the front panel controls and selected Simple Instruction Set

(SIS) commands (see Front Panel Operations on page15 and SIS

Command and Response Table for Matrix Switcher Commands on

page21)

• Load and start up the Microsoft®Windows®-based Product

Configuration Software (see page28) and DSP Configurator

Program (see page29).

• Connect to the built-in HTML pages (see page31), which you

can use to view the switcher status and make changes to the

communications protocol and set the system clock.

About the DTP CrossPoint Matrix Switchers

The DTP CrossPoint matrix switchers distribute HDCP-compliant HDMI

and Extron proprietary DTP video and audio signal types. A matrix switcher

routes any input signal to any combination of outputs. It can route multiple

input and output congurations simultaneously.

The xed matrix size switchers support a total of eight inputs: six HDMI

and two inputs from Extron DTP transmitting devices. The matrix switchers

provide four outputs: two HDMI and two scaled DTP outputs.

The DTP CrossPoint Matrix Series consists of three 8-input by 4-output

models, differentiated by their audio and control capabilities:

• DTP CrossPoint 84

• DTP CrossPoint 84 IPCP SA — Includes a stereo audio amplifier and

a built-in Extron IPCP Pro 350 control processor

• DTP CrossPoint 84 IPCP MA 70 — Includes a 70 V mono audio

amplifier and a built-in Extron IPCP Pro 350 control processor

2DTP CrossPoint 84 • Introduction

POWER

12V

--AMAX

Rx GTx RxTxG

RS-232 IR

RxTx

RGB, Y, R-Y, B-YHDMIHDMI

SIG LINK

DTP OUT

AUDIO

CONTACTRS-232TALLY

123G123+V

RESET

INPUTS

OVER DTPREMOTE

100-240V ~ --A MAX

50/60 Hz LAN

EXP

RS-232

Tx Rx G

RESET

MIC +48V

5678

1234 8

4 1

12345G 678910 G

11 12 13 14 15 G1617181920G

234

56 78

910

11 127

MIC/LINE INPUTS

OUTPUTS

DIGITAL I/O

REMOTE

DMP 128 C

LAN

321

50-60 Hz

100-240V ~ 2.0 A MAX

SIG LINK

OUT

SIG LINK

OUT

1344

XTPRS-232 IR

Tx Rx Tx RxG

Tx Rx

RTSCTS

GTx Rx GTxRxG

RS-232 IR

Tx Rx Tx RxG

Tx Rx G

Tx Rx Tx Rx

XTP

RESET

S/PDIF

OUT

DTP

XTP

DTP

XTP

DTPEXP

+48V

MIC/LINE

113

LINK

LAN 2

LAN 1

LAN 3

HDBT

DTP

HDBT

1234 578

DTP CROSSPOINT 84

CLASS 2 WIRING

RS-232 IR

Tx Rx Tx RxG

OVER TP

REMOTE

SIG LINK

AUDIO INPUTS

INPUTS

AUDIO OUTPUTS

AMP OUTPUT

COM1

CONTROL

1234G

COM2 DIGITAL I/O

COM3

DMP EXPANSION

SGG

2C34C D-SG+S+V

IR/SERIAL

PWR OUT = 6W

eBUS

RELAYS

OUTPUTS

LR 1

LR 3

LR 4

LR 2

LR4

Extron Extron

OUTPUTS

AUDIO

TxRx GTxRx

RS-232 IR

OVERDTP

OUTPUTS

AUDIO

TxRx GTxRx

RS-232 IR

OVERDTP

OUTPUTS

AUDIO

TxRx GTxRx

RS-232 IR

OVERDTP

OUTPUTS

AUDIO

TxRx GTxRx

RS-232 IR

OVERDTP

DTPHDMI 230 Tx

Flat Panel DisplayFlat Panel Display

CATx Cable

up to 330' (100 m)

CATx Cable up to 230' (70 m)

CATx Cable

up to 230' (70 m) CATx Cable

up to 330' (100 m)

RS-232HDMI

HDMI

Extron

DTP HDMI

330 D Rx

Receiver

Extron

DTP HDMI

230 D Rx

Receiver

RS-232

Ethernet

Audio

AudioAudio

HDMI

Extron

DTP T USW 333

DTP Transmitter

Extron

DTP HDMI 230 Tx

Transmitter

Inputs

Outputs

Extron

TLP 1020T

10" Tabletop

TouchLink Pro

Touchpanel

Control

Network

Microphones

Extron

SM 26

Surface Mount

Speakers

Extron

DMP 128 C

Digital Matrix

Processor

Camera

Video Conference

Codec

Table Microphones

Wireless

Microphones

Extron

DTP CrossPoint 84 SA

Scaling Presentation

Matrix Switcher with

DTP Extension

Figure 1. Typical DTP CrossPoint Application

The switchers provide four mono microphone (mic)/line level inputs that

can be mixed with or across one or all audio outputs.

The IPCP models also feature the built-in Extron IPCP Pro 350 control

processor, which has local area network (LAN) Ethernet ports, RS-232

and IR-based control, relays, and digital I/O controls that can control and

monitor a variety of external devices, such as projectors and lights. The

non-IPCP model has one Ethernet port.

The matrix switcher can be remotely controlled via an Ethernet LAN port,

a serial port, or a USB port connection using either the Extron Product

Conguration Software, DSP Congurator software, or the Simple

Instruction Set (SIS).

Altri manuali per DTP CrossPoint 84

Indice

Altri manuali Extron electronics Commutatore a matrice

Extron electronics

Extron electronics MMX 42 Series Manuale utente

Extron electronics

Extron electronics Crosstalk 1632 Manuale utente

Extron electronics

Extron electronics MPX 423 A Manuale utente

Extron electronics

Extron electronics MAV Plus Series Manuale utente

Extron electronics

Extron electronics PowerCage 1600 Manuale utente

Extron electronics

Extron electronics MPX 423 A Manuale utente

Extron electronics

Extron electronics 64 Series Manuale utente

Extron electronics

Extron electronics DTP CrossPoint 108 4K Manuale utente

Extron electronics

Extron electronics FOX Matrix 320x Manuale utente

Extron electronics

Extron electronics DXP DVI Manuale utente

Extron electronics

Extron electronics FOX3 Matrix Series Manuale utente

Extron electronics

Extron electronics CrossPoint 450 Plus 64 Series Manuale utente

Extron electronics

Extron electronics CrossPoint 300 Series Manuale utente

Extron electronics

Extron electronics DXP 88 SDI Manuale utente

Extron electronics

Extron electronics MAV 44 Series Manuale utente

Extron electronics

Extron electronics MVX VGA A Manuale utente

Extron electronics

Extron electronics DTP CrossPoint 4K Series Manuale utente

Extron electronics

Extron electronics MVX 44 Series Manuale utente

Extron electronics

Extron electronics TPX 88 Manuale utente

Extron electronics

Extron electronics CrossPoint Plus 84HV Manuale utente

Extron electronics

Extron electronics ISM 482 Manuale utente

Extron electronics

Extron electronics MAV 62 Manuale utente

Extron electronics

Extron electronics ISM 482 Manuale utente

Extron electronics

Extron electronics MVX 128 VGA A Manuale utente

Manuali Commutatore a matrice popolari di altre marche

Broadcast Tools

Broadcast Tools SS 8.2 Manuale utente

Altimium

Altimium MATF32 Manuale utente

ALFAtron

ALFAtron ALF-MUK44N Manuale utente

Monoprice

Monoprice Blackbird 15377 Manuale utente

Kramer

Kramer XL 3216VS Manuale utente

PTN

PTN FMX12 Manuale utente

CYP

CYP nT15GX01 Manuale utente

Kramer

Kramer VP-2x2 Manuale utente

Kramer

Kramer Sierra Video 6432V5xl Manuale utente

TESmart

TESmart HMA0402A40 Manuale utente

Octava

Octava HD4XSTPMX Manuale utente

Intelix

Intelix FLX-88 Istruzioni operative

Kramer

Kramer LASSEN XL 3232S Manuale utente

Roland

Roland XS-1HD Manuale utente

Kramer

Kramer VS-66HDCPxl Manuale utente

Atlona

Atlona AT-HDMI-22M Manuale utente

Link

Link HD8X8 Manuale utente

AMX

AMX AVS-OP-2020-117 Istruzioni e ricette