Extron electronics SSP 7.1 Manuale utente
SSP 7.1 Setup Guide
Overview
The Extron® SSP 7.1 is a 7.1 channel surround sound processor with four digital
inputs and one analog input. The unit accepts a range of source formats and
uses various listening mode options for use in 5.1 to 7.1 surround sound system
configurations.
The listening mode determines which audio signals will be passed to the speakers.
Each combination of source format and speaker configuration has a default
listening mode. The default listening mode can be overridden by the front panel
controls and the SSP 7.1 Setup and Control Software to select a mode that matches
the requirements of the room and the personal preferences of the listener.
This guide provides basic instructions for an experienced installer to install and perform the initial configuration of the
SSP 7.1. For further details, see the SSP 7.1 User Manual on the Extron Web site (www.extron.com).
SSP 7.1 Installation
Attach the four rubber feet provided with the SSP 7.1, and place the unit on any convenient flat surface. The SSP 7.1 can
also be mounted in a rack with the optional rack-mounting kit (RSU 126, part number 60-190-10), or under furniture with
the optional under-furniture mounting kit (MBU 125, part number 70-077-01). For complete instructions on mounting the
unit, consult the SSP 7.1 User Manual, on the Extron Web site (www.extron.com).
SSP 7.1 Front and Rear Panel Features
a Configuration port
b Input source format indicator
c Mode Override selector
d Input selections
e Volume adjustment knob and LED bar /analog input
gain level control and LED bar
f AC power input
g Audio inputs
h Audio outputs
i RS-232 port
NOTE: Neither the configuration port nor the RS-232 port take precedence over the other. Instructions from either are
processed in the order they are received.
SSP 7.1 Cable Connections
The SSP 7.1 uses an IEC power cable to connect to a 100 - 240 VAC, 50-60 Hz, power source.
The SSP 7.1 accepts four digital inputs and one analog input:
• Inputs 1 and 2 accept digital signals through S/PDIF optical cables.
• Inputs 3 and 4 accept digital signals through S/PDIF coaxial cables.
• Input 5 accepts a balanced or unbalanced, stereo or mono analog input through a 5-pin captive screw connector.
The SSP 7.1 outputs are balanced/unbalanced, line level, analog signals that feed into multi-channel amplifiers for
configurations up to 7.1 surround sound. See the wiring card (included) to ensure correct connections to the SSP 7.1.
Connect the front panel Config port or rear panel RS-232 port to a PC that has the SSP 7.1 Setup and Control Software
installed (see "SSP 7.1 Setup and Control Software Installation" on the next page).
SSP 7.1
SURROUND SOUND PROCESSOR
1 2 3 4 5
CLIP
INPUTS
MODE OVERRIDE
TO ALL
PL II/IIx
DOWNMIX
DTS NEO:6
2-CH
PCM
D
DTS
SOURCE
CONFIG
VOLUME
4 5
2
13
100-240V .5A
50-60Hz INPUTS
DIGITAL
OUTPUTS SSP 7.1
12
35
ANALOG
FRONT CENTER SURROUND BACK RS-232
Tx Rx
SUB
WOOFER
4
LRLRLS RS LB/CB RB SUB
8
7
69
C
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. patent numbers: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,003,467;
7,212,872 and other U.S. and worldwide patents issued and pending. DTS, DTS Digital Surround, ES, and Neo:6 are registered trademarks
and the DTS logos, symbol and DTS 96/24 are trademarks of DTS, Inc.
© 1996-2010 DTS, Inc. All Rights Reserved.
SSP 7.1 Setup Guide (Continued)
68-1339-50
Rev C
07 10
SSP 7.1 Setup and Control Software Installation
Install the SSP 7.1 Setup and Control Software on a PC running Microsoft® Windows® 2000 or later. For full details about
computer requirements, see the SSP 7.1 User Manual on the Extron Web site (www.extron.com).
Insert the provided disk into the computer's CD/DVD drive. The disk should open automatically. If it does not, open it from
"My Computer." Select the Software tab, locate the program, click Install, and follow the on-screen instructions.
The program can also be downloaded from the Extron Web site (www.extron.com) by clicking on the Download tab,
selecting Software from the list at the left of the screen, and locating the program. Click on Install and follow the
on-screen instructions.
By default, the program is installed in the folder C:\Program Files\Extron\SSP7.1 and an icon may be placed on the
computer's desktop.
SSP 7.1 Setup and Control Software Configuration
The SSP 7.1 is "plug and play" for a 5.1 speaker setup. When the unit is
connected to power, an audio source, and speakers, it produces an audio
output that corresponds to the default listening mode for the current
combination of source format and speaker configuration. If a different
listening mode or speaker configuration is required, change it through the
SSP 7.1 Setup and Control Software.
1. Ensure the control computer is connected to the Config port or RS-232
port of the SSP 7.1.
2. Start the software. The program opens with the "Connect to device?"
dialog box (shown in the figure at right).
3. Decide whether to connect directly to the device (Live mode) or to
work in Emulate mode (check the Emulate/Work offline box). For more
information about Live and Emulate modes, see the SSP 7.1 User Manual.
4. If working live, you may need to change the computer port and baud
rate. The default baud rate is 38400.
5. For Live mode, click Connect. For Emulate mode,
click Work Offline.
6. The program opens with the Main tab selected
(shown in the figure at right). There are a
total of three tabs (Main, Speaker Setup,
and Listening Mode Setup). Four further
tabs are available under the Speaker Setup
tab (Speaker Configuration, Speaker
Delay, Testing & Output Trim, and Speaker
Equalization). Three tabs are available under
Listening Mode Setup (Preferences, Override
Preferences, and Dolby, DTS, and Mono
Settings).
NOTE: The order of the tabs provides a logical
sequence for configuring the SSP 7.1.
Extron recommends that each tab is
configured in the order it appears at the
top of the screen, from left to right.
The Main tab recreates all the features found on the front panel of the SSP 7.1. The remaining panels allow the speakers
and listening mode to be configured. Full details about using the SSP 7.1 Setup and Control Software can be found in the
SSP 7.1 User Manual on the Extron Web site (www.extron.com) or in the help file for the program.
Extron USA - West
Headquarters
+800.633.9876
Inside USA/Canada Only
+1.714.491.1500
+1.714.491.1517 FAX
Extron USA - East
+800.633.9876
Inside USA/Canada Only
+1.919.863.1794
+1.919.863.1797 FAX
Extron Europe
+800.3987.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.1568
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FAX
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
© 2010 Extron Electronics. All Rights Reserved. www.extron.com
Altri manuali per SSP 7.1
4
Altri manuali Extron electronics Apparecchiature di registrazione
Extron electronics
Extron electronics TLI Pro 201 Manuale utente
Extron electronics
Extron electronics RGB 190FV Manuale utente
Extron electronics
Extron electronics PIP 422 Manuale utente
Extron electronics
Extron electronics RGB 304 Manuale utente
Extron electronics
Extron electronics RGB 202 Rxi VTG Manuale utente
Extron electronics
Extron electronics Feedback Loop Isolator FBI 100 Manuale utente
Extron electronics
Extron electronics Architectural Interface RGB 440 Manuale utente
Extron electronics
Extron electronics RGB 500 AKM Manuale utente
Extron electronics
Extron electronics KNX 100G Manuale utente
Extron electronics
Extron electronics XMP 240 C AT Manuale utente
Extron electronics
Extron electronics Interface RGB 120p Manuale utente
Extron electronics
Extron electronics EBP 108 RAAP Button Panel Manuale utente
Extron electronics
Extron electronics RGB 118 PLUS Manuale utente
Extron electronics
Extron electronics CVEQ1 AAP Manuale utente
Extron electronics
Extron electronics TLI Pro 201 Manuale utente
Extron electronics
Extron electronics VNM Enterprise Manuale utente
Extron electronics
Extron electronics RGB 203 Rxi VTG Manuale utente
Extron electronics
Extron electronics IP Link IPL T CR48 Manuale utente
Extron electronics
Extron electronics DMP 64 Manuale utente
Extron electronics
Extron electronics Computer-Video Interface RGB 508 AKM Manuale utente
Manuali Apparecchiature di registrazione popolari di altre marche
Strymon
Strymon NIGHTSKY Manuale utente
Mitsubishi Electric
Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuale utente
Tews Technologies
Tews Technologies TPMC465 Manuale utente
Honeywell
Honeywell Excel 50 Manuale utente
SeaLevel
SeaLevel COMM+8.LPCI Manuale utente
Arturia
Arturia AUDIOFUSE STUDIO Manuale utente
