Fametech TP-2515 Manuale utente
1
Service Manual
TP-2515
Fanless Full Flat Touch Screen POS System
Service Manual
Version 1.0
© Copyright Fametech Inc. (TYSSO) 2019
I
Table of Contents
System Disassembly.................................................................................1
ABefore You Start ..........................................................................................1
BRemove all the Peripherals (MSR, i-Button Module, or Customer Display)
from the POS Unit.......................................................................................2
CDisconnect the Devices from the I/O Ports...............................................3
a. Unplug the cables from the POS Unit. .............................................................3
DRemove the HDD/SSD Drive from POS Unit .............................................4
EDetach the Panel Unit (with Main Board) from the Base Unit..................6
FPanel Unit (with Main Board Set)...............................................................7
a. Remove the HDD/SSD Drive from the Modular Main Board Set......................7
b. Disconnect the HDD Cable..............................................................................8
c. Disconnect the Touch Controller from the Main Board ..................................... 9
d. VGA/12VDC Output Cable............................................................................. 10
e. Disconnect the Side I/O Cable from the Main Board.......................................11
f. Disconnect the Side I/O Cable and Speaker from the Main Board ................. 12
g. Disconnect the Power Switch and LED Indicator from the Main Board .......... 13
h. Disconnect the LVDS and Invertor Connectors from the Main Board ............. 14
i. Remove Main Board from the Panel Unit....................................................... 15
j. Remove the RAM Module.............................................................................. 17
k. Remove the Metal Bracket of Bottom I/O Port................................................ 18
l. Remove the Speaker and Power Switch from the Panel Unit......................... 19
m. Remove the Securing Screws of the Touch Controller ................................... 20
n. Detach the LCD Panel from the Front Bezel Set............................................ 22
o. LED Indicator................................................................................................. 23
p. Detach the LCD Panel front the Metal Bracket............................................... 24
GReplace the Power Adaptor...............................................................25
1
System Disassembly
A Before You Start
To prevent injuries to the LCD Panel:
Carefully Place the POS terminal on a flat, clean and stable surface
(for example: a stable long table)
Prepare additional cushioned material (for example: a soft, clean blanket).
Terminate the application running in the POS system, and shut down the
operation system.
Turn-off the power of POS terminal and optional peripherals
(for example: Thermal Receipt Printer, Secondary LCD Display)
Disconnect all the devices or cables connected to the POS terminal.
Disconnect and remove the PowerAdaptor from the POS terminal.
Unplug the power cables from the electrical outlet.
Note:
There are no serviceable parts or components in the POS system or peripherals.
DO NOT modify any parts of POS systems or use non-qualified parts or peripherals.
Store the disconnected parts, cables, devices and screws in a secure location for
further use.
For maintenance or replacement, please consult the technical personnel and contact
the local representative for purchasing the new peripherals and parts
2
B Remove all the Peripherals (MSR, i-Button Module, or Customer
Display) from the POS Unit
Please refer to the User Manual for the instructions of installation and disconnection
procedures.
POS Unit with MSR and i-Button
POS Unit with Customer Display
POS Unit without Optional Peripherals
Note:
Always store the detached MSR Module (or i-Button) and screws in a secure location for
further use.
3
C Disconnect the Devices from the I/O Ports
There are some of the optional peripherals or devices installed onto the POS system.
Please detach the peripherals/devices and store them in a secure location.
Note:
Please turn off the whole POS system and devices before unplugging the cables from the
I/O ports.
a. Unplug the cables from the POS Unit.
Place the POS terminal onto a
stable and flat location
Bottom I/O ports
with Power Cable connected
1. Place the POS terminal onto a
stable and flat location.
2. Lift up the whole POS unit and
examine the Bottom I/O ports of
POS unit.
3. Disconnect all of the connected
cables on the Bottom I/O Ports.
Bottom I/O Ports (disconnected)
Note:
Always store the disconnected cables/devices in a secure location for further use.
4
D Remove the HDD/SSD Drive from POS Unit
HDD/SSD Drive Slot with Protective Cover
(Left)
HDD Drive Module
1. Remove the Protective Cover.
2. Remove the Securing Screws of
the HDD Drive Slot
Loosen the Securing Screw of the
HDD Drive Slot
3. Pull out the HDD Drive Module
Pull out the HDD Drive Module
5
TIP: Replace the HDD/SSD Drive
To replace the HDD/SDD Drive:
1. Remove the securing screws of HDD/SSD Module.
2. Replace a new HDD or SSD drive and re-install to the HDD Bracket.
HDD Bracket (Left), SSD Drive (Right)
and Securing Screws (Up)
When Disassembling:
Please disassemble the HDD/SSD drive and HDD Bracket correctly.
Incorrect installation of HDD module may cause the system not functioning.
When Re-installing the HDD/SSD Module:
Beware the Direction of HDD/SSD module when re-install it back to the POS Unit.
Make sure the securing screw hole is matches to the HDD Drive Slot of POS Unit
DO NOT install the module in Wrong direction.
To re-install the HDD/SSD module back to the POS Unit,
DO NOT Push or pull the HDD/SSD module with force or it may damage the
module and POS Unit. .
6
E Detach the Panel Unit (with Main Board) from the Base Unit
Slide Lock on the back of POS Unit
Detached Panel Unit (Left)
and Back Cover (Right)
1. Push upward and release the two
Slide Locks (Left and Right)
on the back of the POS unit.
Slide Lock (released)
2. Lift the Panel Unit from the Back
Cover.
3. Pull up the Panel Unit from the
Back Cover.
Slide Lock
(Left)
7
F Panel Unit (with Main Board Set)
a. Remove the HDD/SSD Drive from the Modular Main Board Set
Panel Unit with Main Board Set
(HDD/SSD Drive removed)
HDD Connector on the HDD Slot
Power Connector (Left) DATA Connector (Right)
Metal HDD Slot
1. Use a screw driver to remove the
HDD/SSD Drive from the
Modular Main Board Set.
(Please refer to
D. Remove the HDD/SSD Drive
from POS Unit.)
2. Remove the HDD Connector from the
Metal HDD Slot (Red Marks).
Loosen the Securing Screws on
the Metal HDD Slot
3. There are 3 securing screws on the
Metal HDD Slot.
Use a screw driver to remove the
Metal HDD Slot from POS Unit:
Loosen and Remove the
Securing Screw of Metal HDD Slot (A)
DATA
Connector
Power
Connector
8
b. Disconnect the HDD Cable
The HDD Cable:
Data Cable (RED) and
Power Cable (Black)
HDD cable
Disconnect the HDD Cable (Power
and Data Connectors) from the Main
Board.
Disconnect the connectors of HDD Cable
from the Main Board
Note:
If there is a cable binder on the HDD cable, cut the cable binder and disconnect the
HDD cable from the main board.
Store the HDD cable in a secure location for further use.
Remember to use a new cable binder to arrange and re-tighten the cables on the
Main Board Set when the maintenance is completed.
Altri manuali per TP-2515
1
Indice
Altri manuali Fametech Terminale touch
Fametech
Fametech POStation 7000 Series Manuale utente
Fametech
Fametech PKB-044 Manuale utente
Fametech
Fametech TP-2515 Manuale utente
Fametech
Fametech Zircon Series Manuale utente
Fametech
Fametech POS-6000 Series Manuale utente
Fametech
Fametech POS-3000 Series Manuale utente
Fametech
Fametech POS-8017F Series Manuale utente
Fametech
Fametech TP-8515 Manuale utente
Fametech
Fametech AP-3515 Manuale utente
