Fancom IM.60 24V + CPS Manuale utente
G N
Gn
N.B.: The original, authentic version of this manual is the English version produced by Fancom B.V. or one of its
daughter companies (referred to further as Fancom). Any modifications introduced to this manual by third parties
have neither been checked nor approved by Fancom. Modifications are taken by Fancom to include translations
into languages other than English and the insertion and/or deletion of text and/or illustrations to/from the original
contents. Fancom cannot be held liable for any damages, injury, guarantee claims and other claims relating to this
type of modification, in as far as these modifications result in a content that differs from the original English
version of this manual produced by Fancom. For the latest information about product installation and operation,
please contact the customer service dept. and/or the technical service dept. of the Fancom concerned. In spite of
the care taken when compiling this manual, if you should discover any errors, please inform Fancom B.V. in
writing. Fancom B.V., PO Box 7131, 5980 AC Panningen (the Netherlands).
Copyright © 2019 Fancom B.V.
Panningen (the Netherlands)
All rights reserved. Nothing from this manual may be copied, distributed or translated into other languages, partly
or wholly, without express prior written permission from Fancom. Fancom reserves the right to modify this manual
without notice. Fancom can give no guarantee, neither implicit nor explicit, for this manual. All risks are for the
user.
This manual has been compiled with the utmost care. If, however, you should discover an error, please inform
Fancom B.V.
Art.Nr. 5911920
GB190903
Gn
i
g
1. General introduction .................................................................................................................................. 1
1.1 Fancom Sales & Service Center..................................................................................................... 1
1.2 How to use this manual .................................................................................................................. 1
1.3 Safety instructions and warnings.................................................................................................... 2
2. Installing the iM.60...................................................................................................................................... 3
2.1 Mount the iM.60.............................................................................................................................. 3
2.2 Mount the cable winch drum........................................................................................................... 4
2.3 Mount the steel cable on the cable winch drum.............................................................................. 5
2.4 Mount the belt drum and belt.......................................................................................................... 5
2.5 Mount the pipe chain drive (optional).............................................................................................. 6
2.6 Mount the CE cover........................................................................................................................ 6
2.7 Mount the CE protection cover on the belt drum ............................................................................ 7
2.8 Connect the iM.60 .......................................................................................................................... 7
2.9 Test the iM.60............................................................................................................................... 10
3. Using the iM.60 ......................................................................................................................................... 11
3.1 Set the switch............................................................................................................................... 11
3.2 Remote manual operation ............................................................................................................ 11
3.3 Disposal / recycling....................................................................................................................... 11
4. Adjusting the iM.60................................................................................................................................... 12
4.1 Adjust limit switches ..................................................................................................................... 14
4.2 Adjust the CLOSE position........................................................................................................... 16
4.3 Adjust the OPEN position (if CLOSE already is adjusted)............................................................ 17
4.4 Adjust the PREDEFINED position ................................................................................................ 17
4.5 Complete adjustments.................................................................................................................. 17
5. Extra possibilities..................................................................................................................................... 18
5.1 Using the emergency battery (optional)........................................................................................ 18
5.2 Predefined position / adjusting independently .............................................................................. 18
5.3 Reversing the direction of rotation................................................................................................ 19
5.4 Maximum thermostat (optional).................................................................................................... 19
5.5 External alarm led (optional)......................................................................................................... 20
5.6 Fantura air inlet............................................................................................................................. 20
5.7 Restore factory settings................................................................................................................ 20
6. Alarms ....................................................................................................................................................... 21
7. Technical specifications .......................................................................................................................... 22
8. Appendix: connection diagram............................................................................................................... 24
9. EC declaration of conformity................................................................................................................... 25
Gn
1
g
This manual has been created with the utmost care. If, however, you should discover an error, please inform
Fancom B.V.
For any questions and support, please contact the local Fancom Sales & Service Center.
The following symbols are used in this manual:
Tips and suggestions.
Note providing recommendations and additional information.
Warning indicating damage to the product if you do not follow procedures carefully.
Warning indicating danger to humans or animals.
Electric shock hazard. Danger to humans and animals.
Example of a practical application of the described functionality.
Calculation example.
Gn
2
g
Before installing and commissioning the iM.60, read the safety instructions, provisions and conditions carefully.
This paragraph contains a number of general safety instructions. The installation of the device and remedying of
any malfunctions should be performed by a certified electrical installer according to the applicable norms. The
guarantee does not apply if this product is installed in any other way than is indicated by Fancom and if the
product's motor has been opened and changes have been made to the product.
Disconnect power before installation.
Prevent electrostatic discharge (ESD) when working on the iM.60. Ensure that the workplace is clean
and dry.
Use correct wires as shown in the connection diagrams.
Make all wiring connections and check them before applying power. Incorrect connections can cause
permanent damage.
Never place the iM.60 in a place where the weather has direct influence (not in the sun, not in places
where the temperature can rise sharply etc.).
Inspect the iM.60 periodically for any damages. Notify your installation technician immediately of any
damages. A damaged iM.60 is unsafe!
It is advisable not to switch off the iM.60. This could lead to condensation caused by cooling down.
Do not touch any of the iM.60 moving parts.
Gn
3
g
Install the iM.60 and associated components as follows:
1. Place the iM.60 (see page 3)
2. Mount the coercion roller (see page 4)
3. Mount the steel cable on the cable winch drum(see page 4)
4. Mount the belt drum and belt (see page 5)
5. Mount the pipe chain drive (optional) (see page 5)
6. Mount the CE cover (see page 6)
7. Connect the iM.60 (see page 7)
8. Test the iM.60 (see page 10)
Never place the iM.60 in a place where the weather has direct influence (not in the sun, not in places
where the temperature can rise sharply etc.).
Place the iM.60 only inside the house.
Place the iM.60 at such a height that the manual control can be used.
Do not place the iM.60 with the driveshaft pointing upwards. This keeps water from entering the motor
via the drive shaft. If you do place the iM.60 with the driveshaft pointing upwards, then mount the CE
cover on the shaft.
Cable / pulley combination
Gn
4
g
1. Drill holes in the floor surface. For this, you can use the included drill template. Ensure at least 130 mm of
free space behind the iM.60. This is the space required to disassemble the cover.
2. Place the iM.60 on a flat subsurface with the screw fittings on the bottom.
If the iM.60 cannot be placed on a flat subsurface, you can use the included shims (0.5 mm and
1.0 mm thickness).
3. Seal the screw fittings with grout to prevent penetration of moisture, dust and/or corrosive gases.
Gn
5
g
Ensure that you have the steel cable on the correct side and that you have the proper direction of
rotation for coiling up the steel cable.
1. Pull the steel cable through the hole in the flange.
2. Mount the retaining clip on the end of the steel cable.
3. Wrap the steel cable around the flange at least once.
Ensure that you have the belt on the correct side and that you have the proper direction of rotation for
coiling up the belt.
Gn
6
g
The chain drive is suitable for 1-inch pipe.
Placement of the CE cover is mandatory if the iM.60 is installed within reach (lower than 2.5 m above
the subsurface) of humans or animals.
Gn
7
g
Placement of the CE cover is mandatory if the iM.60 is installed within reach (lower than 2.5 m above
the subsurface) of humans or animals.
You may connect to the iM.60 as an I/O network module or as a traditional terminal.
Install the cables in such a way that they cannot become damaged and so that they can easily be
replaced in the event of malfunction. Limit the length of the cables much as possible.
Low-voltage and high-voltage wires may not be placed parallel to each other but may cross each other.
When using metal cable trays, Fancom advises to connect the cable trays to protective earth at the
ends and at as many other places as possible.
When using two iM.60, connect both iM.60 to one Fancom double insulated transformer 230V/24Vac
100VA (35431003).
Indice
Lingue:
Altri manuali Fancom Servoazionamento
