Fancom IM.60 Manuale utente

iM.60

MANUAL NHANDLEIDING D

ANLEITUNG

GND

N.B.: The original, authentic version of this manual is the English version produced by Fancom B.V. or one of its

daughter companies (referred to further as Fancom). Any modifications introduced to this manual by third parties

have neitherbeen checkednor approved by Fancom. Modifications are taken by Fancomto include translations into

languages other than English and the insertion and/or deletion of text and/or illustrations to/from the original

contents. Fancom cannot be held liable for any damages, injury, guarantee claims and other claims relating to this

type of modification, in as far as these modifications result in a content that differs from the original English version

of this manual produced by Fancom. For the latest information about product installation and operation, please

contact the customerservice dept. and/or the technical service dept. of the Fancom company concerned. In spite of

the care taken when compilingthis manual, if you should discover any errors, please inform Fancom B.V. in writing.

Fancom B.V., PO Box 7131, 5980 AC Panningen (the Netherlands).

Panningen (the Netherlands)

wholly, without express prior written permission from Fancom. Fancom reserves the right to modify this manual

without notice. Fancom can give no guarantee, neither implicit nor explicit, for this manual. All risks are for the user.

This manual has been compiled with the utmost care. If, however, you should discover an error, please inform

Fancom B.V.

Art.Nr. 35911713

GB140401

Gnd

Table of contents

1. General introduction .................................................................................................................................. 1

1.1 Fancom helpdesk........................................................................................................................... 1

1.2 How to use this manual..................................................................................................................1

1.3 Safety instructions and warnings....................................................................................................1

2. Installing the iM.60...................................................................................................................................... 2

2.1 Placing the iM.60............................................................................................................................2

2.2 Mounting the coercion roller ...........................................................................................................3

2.3 Mounting the steel cable on the coercion roller ..............................................................................4

2.4 Mounting the strap drum and strap.................................................................................................4

2.5 Mounting the pipe chain drive (optional).........................................................................................5

2.6 Mounting the CE cover...................................................................................................................5

2.7 Connecting the iM.60......................................................................................................................5

2.8 Testing the iM.60............................................................................................................................7

3. Using the iM.60 ........................................................................................................................................... 8

3.1 Setting the switch ...........................................................................................................................8

3.2 Remote manual operation ..............................................................................................................8

4. Adjusting the iM.60..................................................................................................................................... 9

4.1 Adjusting limit switches................................................................................................................. 11

4.2 Adjusting the CLOSED position.................................................................................................... 13

4.3 Adjusting the OPEN position ........................................................................................................ 13

4.4 Adjusting the PREDEFINED position............................................................................................ 14

4.5 Completing adjustments............................................................................................................... 14

5. Extra possibilities..................................................................................................................................... 15

5.1 Using the emergency battery (optional)........................................................................................ 15

5.2 Predefined position / adjusting independently .............................................................................. 15

5.3 Reversing the direction of rotation................................................................................................ 16

5.4 Connecting the maximum thermostat........................................................................................... 16

6. Alarms ....................................................................................................................................................... 17

7. Technical specifications .......................................................................................................................... 18

8. Appendix: connection diagram............................................................................................................... 20

9. EG declaration of conformity................................................................................................................... 21

Gnd

1. General introduction

This manual has been compiled with the utmost care. If, however, you should discover an error, please inform

Fancom B.V.

1.1 Fancom helpdesk

For any questions and support, please contact the local Fancom Sales & Service Center.

1.2 How to use this manual

The following symbols are used in this manual:

Tips and suggestions.

Note providing recommendations and additional information.

Warning indicating damage to the product if you do not follow procedures carefully.

Warning indicating danger to humans or animals.

Electrical shock hazard. Danger to humans and animals.

Example of a practical application of the described functionality.

Calculation example.

1.3 Safety instructions and warnings

Before installing and commissioning the iM.60, read the safety instructions, provisions and conditions carefully. This

paragraph contains a number of general safety instructions. The installation of the device and remedying of any

malfunctions should be performed by a certified electrical installer according to the applicable norms. The guarantee

does not apply if this product is installed in any other way than is indicated by Fancom and if the product's motor has

been opened and changes have been made to the product.

Prevent electrostatic discharge (ESD) when working on the iM.60. Ensure that the workplace is clean and

dry.

Check the iM.60 for proper functioning regularly.

Never install a damaged iM.60! Notify your supplier of any damages.

Do not touch any of the iM.60 moving parts.

Gnd

2. Installing the iM.60

Install the iM.60 and associated components as follows:

1. Place the iM.60 (see page 2)

2. Mount the coercion roller (see page 3)

3. Mount the steel cable on the coercion roller (see page 3)

4. Mount the strap drum and strap (see page 4)

5. Mount the pipe chain drive (optional) (see page 4)

6. Mount the CE cover (see page 5)

7. Connect the iM.60 (see page 5)

8. Test the iM.60 (see page 7)

2.1 Placing the iM.60

Never place the iM.60 in a place where the weather has direct influence (not in the sun, not in places

where the temperature can rise sharply etc.).

Place the iM.60 at such a height that the manual control can be used.

Do not place the iM.60 with the driveshaft pointing upwards. This keeps water from entering the motor via

the drive

shaft. If you do place the iM.60 with the driveshaft pointing upwards, thenmount the CEcover on

the shaft.

Gnd

1. Drill holes in the floor surface. For this, you can use the included drill template. Ensure at least 130 mm of free

space behind the iM.60. This is the space required to disassemble the cover.

2. Place the iM.60 on a flat subsurface with the screw fittings on the bottom.

If the iM.60 cannot be placed on a flat subsurface, you can use the included shims (0.5 mm and 1.0 mm

thickness).

3. Seal the screw fittings with grout to prevent penetration of moisture, dust and/or corrosive gases.

2.2 Mounting the coercion roller

Gnd

2.3 Mounting the steel cable on the coercion roller

Ensure that you have the steel cable on the correct side and that you have the prope

r direction of rotation

for coiling up the steel cable.

1. Pull the steel cable through the hole in the flange.

2. Mount the retaining clip on the end of the steel cable.

3. Wrap the steel cable around the flange at least once.

2.4 Mounting the strap drum and strap

Ensure that you have the strap on the correct side and that you have the proper direction of rotation for

coiling up the strap.

Gnd

2.5 Mounting the pipe chain drive (optional)

The chain drive is suitable for 1-inch pipe.

2.6 Mounting the CE cover

Placement of

the CE cover is mandatory if the iM.60 is installed within reach (lower than 2.5 m above the

subsurface) of humans or animals.

2.7 Connecting the iM.60

You may connect to the iM.60 as an I/O network module or as a traditional terminal.

Make sure that the iM.60 is well and properly grounded according to the guidelines.

Install the cables in such a way that they cannot become damaged and so that they can easily be

replaced in the event of malfunction. Limit the length of the cables much as possible.

Low-voltage and high-voltage wires may not be placed parallel to each other but may cross each other.

When using metal ducts, Fancom advises grounding the ducts at the ends and at as many other places

as possible.

Gnd

Connection as an I/O network module

Setting the I/O address

Using the table below, set the I/O address with the dipswitch.

In an I/O network, all iM.60 units must have a unique address.

I/O

address DIP 1 DIP 2 DIP 3 DIP 4 DIP 5 DIP 6 DIP 7 DIP 8

AN.

N/A

OFF

Gnd

Setting the temperature measurement

As an I/O network module, the iM.60 can measure the temperature itself. This value can be used by the control

computer or for independent regulation in case of emergency.

Set JP1 to T.

Set Dip 6 to OFF.

Connection as a traditional terminal

When used as a traditional terminal, the iM.60 is controlled by a signal voltage of 0/10V or 10/0V. No temperature

measurement is possible in this application.

Set JP1 to U.

Set Dips 1 through 6 to ON.

Electrical connection

Turn on the electricity after you have connected the iM.60.

Switch on the power only after all cables have been connected correctly.

2.8 Testing the iM.60

1. Check whether the iM.60 has been connected correctly.

2. Check whether the iM.60 works optimally.

Indice

Lingue:

Altri manuali Fancom Servoazionamento

Fancom

Fancom IM.60 24V + CPS Manuale utente

Manuali Servoazionamento popolari di altre marche

Mitsubishi Electric

Mitsubishi Electric MELSERVO-J5 MR-J5-G Series Manuale utente

Robotis

Robotis XH430-W350-T Manuale utente

NTI AG

NTI AG LinMot C1250 Series Manuale utente

Welcon

Welcon WE2A D048 Series Manuale utente

Parallax

Parallax 900-00005 Manuale utente

Festo

Festo TP 1410 Manuale utente

Axor

Axor MAGNUM 400 Manuale utente

Siemens

Siemens SINAMICS S120 Manuale utente

Danfoss

Danfoss 176F6494 Manuale utente

THORLABS

THORLABS TDC001 Manuale utente

TECO

TECO JSDAP Series Manuale utente

Rockwell Automation

Rockwell Automation Allen-Bradley Kinetix 6000 Manuale utente

GSK

GSK DA98D Manuale utente

Lenze

Lenze m850 Guida

Baumuller

Baumuller b maXX 3000 Manuale

Baumuller

Baumuller b maXX 5000 Manuale

Baumuller

Baumuller b maXX 5500 Manuale

Danfoss

Danfoss VLT HVAC Drive FC 102 Manuale utente

Fancom iM.60 Manuale utente

Manuali Servoazionamento popolari di altre marche