F&F PCR-513 Manuale utente
PCR-513
Time relay
with delayed activation
The PCR-513 time relay is used for time control in industrial
and home automation systems (such as: ventilation, heating,
lighting, signaling, etc.).
Operating mode: ON delay
After the supply voltage is switched on (the green LED "U" is on),
the contact remains in position 11-10 and the set operating time
counts down. After the preset time has elapsed, the contact swi-
tches to position 11-12 (the red LED is on). To execute the
operating mode of the relay again you need to switch off the
power supply voltage and switch it back on.
Purpose
Functioning
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collecon, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
- 2 -
Using the time range setting knob T↔, set one of the selected
ranges, then using the time setting knob T×, set the selected va-
lue on a scale from 1 to 12. The product of these values is equal
to the operating time (for example: 1 m × 7 = 7 min.).
0.1 s: 0.1÷1.2 sec 10 m: 10÷120 min.
1 s: 1÷12 sec 2 h: 2÷24 h
10 s: 10÷120 sec 1 d: 1÷12 days (24÷288 h)
1 m: 1÷12 min. 2 d: 2÷24 days (48÷576 h)
ON when the power supply is on, the contact is perma-
nently closed in position 11-12.
OFF when the power supply is on, the contact is perma-
nently closed in position 11-10.
Working time setting
Time ranges
- 3 -
When the power supply of the relay is switched on, the
system does not react to the change of time range and
working time settings.
Operation with the newly set time range and operating
mode takes place after the power supply is switched off
and back on.
With the power supply switched on, it is possible to
smoothly adjust the time within the time range of 1÷12.
1.Turn off the power supply.
2.Fix the relay on a rail in the switchboard.
3.Connect the power supply wires (according with marks) to
terminals 1-3.
4.Connect the power supply circuit of the receiver in series to
terminals 11-12.
5.Use the knobs to set the operating time.
Mounting
- 4 -
U
1
2
3
4
OFF
T↔
T×
Ç
578
9
6
12
10
11
0,1s
1s
ON
10s 1m
10m
2h
2d
1d
Ç
4
7
5
8
6
9
10 11 12
123
PCR-513
PCR-513 24 V
PCR-513 UNI
N
N
O
O
N
N
C
C
C
C
O
O
M
M
PCR-513-16 230 V
PCR-513 230 V
L
N
L
L
N
N
Wiring diagram
- 5 -
230 V version: 1 (N), 3 (L)
24 V version: 1 (~/–), 3 (~/+)
UNI version: 1 (~), 3 (~)
1-3 relay power supply
11 contact power input
10 output: break contact (passive)
12 output: closing contact (active)
power supply 195÷253 V AC
maximum load current (AC-1) 8 A
contact separated 1×NO/NC
working time (adjustable) 0.1 sec÷576 h
activation delay <50 msec
power supply indication green LED
contacts state indication red LED
power consumption 0.8 W
terminal 2.5 mm² screw terminals
tightening torque 0.4 Nm
working temperature -25÷50°C
dimensions 1 module (18 mm)
mounting on TH-35 rail
protection level IP20
Description of terminals
Technical data
- 6 -
The F&F products are covered by a warranty of the 24 months
from the date of purchase. Effective only with proof of purchase.
Contact your dealer or directly with us.
F&F Filipowski sp. j. declares that the device is in conformity
with the essential requirements of The Low Voltage Directive
(LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC)
Directive 2014/30/UE.
The CE Declaration of Conformity, along with the references to
the standards in relation to which conformity is declared, can be
found at www.fif.com.pl on the product page.
Warranty
CE declaration
E230117
Indice
Altri manuali F&F Staffetta
F&F
F&F BIS-411BM-LED Manuale utente
F&F
F&F PP-2Z Manuale utente
F&F
F&F PCS-517.2 Manuale utente
F&F
F&F FW-R1P Manuale utente
F&F
F&F FW-R1D Manuale utente
F&F
F&F BIS-411B Manuale utente
F&F
F&F PP-1P Manuale utente
F&F
F&F BIS-410-24V Manuale utente
F&F
F&F PK-1Z-LED 230 V Manuale utente
F&F
F&F BIS-411i Manuale utente
F&F
F&F SWITCH & ENERGY Wi-R1S1-P Manuale utente
F&F
F&F BIS-408 Manuale utente
F&F
F&F BIS-416 Manuale utente
F&F
F&F BIS-410-LED Manuale utente
F&F
F&F EPP-618 Manuale utente
F&F
F&F BIS-411 1R1Z Manuale utente
F&F
F&F FW-R2D Manuale utente
F&F
F&F PCS-516UNI Manuale utente
F&F
F&F BIS-404 Manuale utente
F&F
F&F MST-03 Manuale utente
