Faro ScanPlan Manuale utente

Connecting Your Phone to the ScanPlan

Quick Steps

1. Align and attach magnetic strips to back of phone.

2. Connect USB adapter to your phone's USB port.

3. Slide phone onto ScanPlanTM tray and onto ScanPlan USB port.

Overview

Compatible smart phones attach to the FARO®ScanPlan using magnets and a magnetic sticker, as well as a USB port

adapter. Follow these instructions to make sure your phone fits correctly.

Preparing the Phone

1. Open the phone tray on the top of the ScanPlan, pressing gently to click the tray into place. Note: Magnets are

used to connect your phone to the ScanPlan and are located behind the tray screen near the middle divider.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Connecting_Your_Phone_to_the_ScanPlan

Updated: Fri, 20 Aug 2021 05:36:17 GMT

2. Attach the metallic sticker to the back of your phone at the place were the magnets will contact it.

Note: If you have a very thick protective case on your phone, the charging port may not align with the ScanPlan

port. Remove the phone case or replace with a thinner case.

3. Three magnetic USB adapters are provided with the ScanPlan.

Find the adapter that fits your phone’s charging port and carefully insert it into the port.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Connecting_Your_Phone_to_the_ScanPlan

Updated: Fri, 20 Aug 2021 05:36:17 GMT

Android

USB tethering must be activated to connect to the ScanPlan. The app will automatically redirect you to the right settings

page (Settings < Connections < Mobile Hotspot and Tethering). Start the app and choose USB connection.

Activate USB Tethering. Note: In Android systems this step must be done each time the phone is reconnected.

iOS

The phone will ask for confirmation that you want to trust the device. Confirm, and the connection will complete.

The first time you connect you must activate connection sharing via USB. Go to Settings > Personal Hotspot and

activate the personal hotspot. This will allow a connection between ScanPlan and the iOS Device. Note: Choose the

WLAN Password carefully as your phone can now also operate as a mobile access point and share its connection

Connecting Your Phone

1. Switch on the ScanPlan by pressing the power button. The LED on the button will blink while booting, and will stop

blinking when the ScanPlan is ready to scan.

2. Switch on your smartphone. Flip open the phone tray and press gently until it clicks into place.

3. Place your smartphone in the tray. Magnets in the tray will attach it firmly.

https://knowledge.faro.com/Hardware/2D_Scanners/ScanPlan/Connecting_Your_Phone_to_the_ScanPlan

Updated: Fri, 20 Aug 2021 05:36:17 GMT

4. Position the phone so that the USB port aligns with the magnetic USB connector in the bottom of the tray.

The phone is properly aligned when the phone’s battery symbol shows that the phone is charging.

5. Open the ScanPlan app and connect to the ScanPlan by tapping the icon. If the app and the ScanPlan are

connected, the list of available projects will appear.

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente