Farsun FG2600 Manuale utente
Barcode scanner
User¶s Manual
2
Contents
Programming with Parameter.............................................................. 4
Interface selection...................................................................................... 6
Scanning Mode Setting............................................................................... 7
Keyboard wedge......................................................................................... 9
USB interface............................................................................................ 11
RS-232 Interface ....................................................................................... 12
Global Settings.......................................................................................... 16
Indication.................................................................................................. 21
EAN-13 and ISBN/ISSN.............................................................................. 22
EAN-8........................................................................................................ 24
UPC-A........................................................................................................ 23
UPC-E ........................................................................................................ 28
Code128 C................................................................................................. 28
Code 39..................................................................................................... 29
Code 93..................................................................................................... 32
Interleaved 2 of 5 ..................................................................................... 34
Industrial 2 of 5......................................................................................... 38
Matrix 2 of 5 ............................................................................................. 40
Codabar .................................................................................................... 37
Code 11..................................................................................................... 38
MSI/Plessey .............................................................................................. 44
UK/Plessey................................................................................................ 46
3
GS1 DataBar (GS1 DataBar Truncated)..................................................... 44
GS1 DataBar Limited................................................................................. 45
GS1 DataBar Expanded............................................................................. 50
Advanced Bar Code Data Formatting ....................................................... 51
Prefix................................................................................................... 51
Suffix................................................................................................... 52
Preamble ............................................................................................ 52
Postamble........................................................................................... 53
Code ID ............................................................................................... 48
Code ID position ................................................................................. 48
Code name transmission .................................................................... 49
Code length transmission ................................................................... 49
Case conversion:................................................................................. 49
Insert String G1 Setting....................................................................... 50
Insert String G2 Setting....................................................................... 50
Insert String G3 Setting....................................................................... 50
Insert String G4 Setting....................................................................... 51
FN1 substitution string setting ........................................................... 51
Truncate leading G5 String setting ..................................................... 57
Truncate ending G6 string setting ...................................................... 57
Replace String Setting......................................................................... 58
Appendix 1 ASCII Table 1-2....................................................................... 53
Appendix 2 Parameter bar code............................................................... 55
**Wireless Communication Setting.56
Wireless Channel...57
RF operĂƚŝŶŐŵŽĚĞ..58
4
Battery Status... 59
Programming with Parameter
It is need to scan more than one setting barcode to program the scanner
with parameter.
Program Parameters
Notice:
1. Please carefully read the User Manual before using the barcode scanner.
2. All software, including firmware, furnished to the user is on a licensed basis.
3. The right is reserved to make changes to any software or product to improve
reliability, function, or design.
4. The material in this manual is subject to change without notice.
.when poweredon,the wirelessfunction willautomaticallysendsignal
each11seconds.Foryourhealth,turn it offisrecommendedwhen not use.
5
5
The steps of programming are:
1. 6FDQWKH)XQFWLRQ6HWWLQJ%DUFRGH7KH6FDQQHUZLOOLVVXHDEHHS´
sound, and the Red LED is on until the program is finished.
2. Scan the parameters bar code. The parameters may be one or more than
one digits.
3. 6FDQWKHVHWWLQJEDUFRGH³)LQLVK6HWWLQJ´,ILWLVSURJUDPPHG
VXFFHVVIXOWKHVFDQQHUZLOOLVVXHD³EHHSEHHS´VRXQGEXWLVVXHD
³EHHSEHHSEHHS´VRXQGZKHQIDLOV
e.g.
˖
Set min. code length of Code 128 to 5 chars
˖
ƻ
1˖Open the manual and turn chapter "code128 ". Scan the setting bar code
³Scan Min. Code Length´
Scan Min. Code Length˄2 Digits˗00~99ˈ1*˅
ƻ
2˖Turn to the last page of this Manual Appendix 10 Parameter bar code,
VFDQWKHSDUDPHWHUEDUFRGH³´DQG ³´˖
0
5
6
ƻ
3˖6FDQ³)LQLVK6HWWLQJ´ILQLVKWKHVHWWLQJ.
Finish Setting
Set Factory Defaults
If you wish to return the base unit to the entire factory default settings (radio
FRPPXQLFDWLRQVHWWLQJLVQRWLQFOXGHGVFDQWKHEDUFRGH´Set Defaults´
Set Defaults
Interface selection
This scanner supports interfaces such as keyboard wedge, RS-232 serial
wedge, and USB interface.
Typically, host is able to identify the host port type automatically. In extreme
cases, host port may need setting manually if the host fails to identify it.
AutomaticIdentification*
USB
7
PS/2KeyBoard RS232
Scanning Mode Setting
Good-read off scanning Mode: The trigger button must be pressed once
to activate scanning. The light source of scanner stops scanning when there
is a successful reading or no code is decoded after the Stand-by duration
elapsed.
Select Good-read off scanning Mode *
8
Auto-detection scanning Mode: The scanner will start scan Automatically
if any object enter the scan area. The laser light of scanner stops scanning
when there is a successful reading or no code is decoded after the Stand-by
duration elapsed. Once the laser light stops scanning, the present object must
be remove away from the scan area to enable Auto-detect sensor.
Select Auto-detection scan
Press Scanning Mode˖It can continue scan barcode when the button is
continuing pressed.
Press Scanning Mode
Click Scanning Mode: When the button is click, the scanner will keep
scanning the barcode until the barcode is reader or the Stand-by duration
elapsed.
Click Scanning Mode
Continuous Scanning mode: the scan engine is always scanning and
decoding. The module will read the barcode which gets into the scanning
area automatically. Only when the barcode that has been read gets out of the
scanning area, the module can read the next barcode.
9
Select Continuous Scanning mode
Auto Continue mode: The scanner will start continuous scan Automatically
if any object enter the scan area. When there is no bar code is read for half a
minute, the scanner shutdown the laser line and exit continuous scanning
mode.
Auto Continue mode
Keyboard wedge
Keyboard type IBM ATˈPS/2 *
10
Other˄Reserved˅
Keyboard layout
USA *
Italian
French
Turkish F
Turkish Q
Indice
Manuali Lettore di codici a barre popolari di altre marche
POSMicro
POSMicro Datalogic PowerScan D7100 Manuale utente
Marson
Marson MT780 Guida rapida alla configurazione
NCR
NCR RealPOS Manuale utente
Motorola
Motorola SE3300 Guida rapida alla configurazione
Element
Element P130BT Manuale utente
Motorola
Motorola Symbol LS3008 Manuale di installazione e funzionamento
