2 column
electro-mechanical lift
Mod. Z41/3S
6
SAFETY RECOMMENDATIONS
The equipment can be used only by specifically trained, authorised personnel in
good health.
The operator must be authorised by the plant manager.
It must be installed by authorised and professionally qualified personnel, in full
compliance with the installation instructions provided below.
If the equipment is tampered with or modified in any way, without the permission of
the manufacturer, the latter shall not be held responsible for any damage resulting
from such operations and the warranty will be automatically void.
Removing or tampering with the safety devices is a breach of the European Safety
Standards.
The lift must not be operated by unauthorised persons.
It is forbidden to climb onto or stand on the support devices or on the vehicle.
The lift can be used in places sheltered from the wind and without the risk of
explosions or fire.
The lift must not be used to wash vehicles.
It is forbidden to sand or grind near the lift.
The lift must not be used for purposes other than those provided for in this manual.
To operate on the lift, use suitable clothing as required by the laws of the country
where the lift is used; do not wear things such as bracelets or similar and long hair
must be appropriately protected.
Do not use the lift if the room temperature is below
-10°C.
We recommend the use of original accessories.
Our lifts are designed for ZAVAGLI SANTI srl accessories.
Check that, while lifting and lowering the equipment, no dangerous situations are
created for people or property
Place the main switch on zero and lock it in case of an emergency intervention or
maintenance operation.
Place the main switch on zero when performing operations on the raised vehicle.
Make sure that the disassembly of parts of the vehicle does not alter the load
distribution beyond the acceptable limits provided for.
Make sure that the vehicle is stable on the support devices as soon as the lifting
manoeuvre begins.
Stop the lift immediately if any irregular movements are detected and request the
intervention of the authorised service centre.
Interventions on the electrical system, even if minor, require the intervention of
professionally qualified personnel.
