Fein ASCT 14 Guida all'installazione

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 1/48 Version 1

Repair instructions

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 2/48 Version 1

1. Models described

2. Technical data

3. Provisions

4. Tools required

5. Lubricants and auxiliary substances required

6. Disassembly

7. Assembly

8. Troubleshooting

9. Connection diagram

Contents

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 3/48 Version 1

These instructions describe how to repair the following models:

Model Order no.

ASCT 14 711314

ASCT 14U 711315

ASCT 18 711316

ASCT 18U 711317

1. Models described

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 4/48 Version 1

2. Technical data

Technical data

The complete technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet (Customer Service

→ Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 5/48 Version 1

3. Provisions

Provisions

Please note that power tools may only be repaired, maintained and checked by a trained

electrician, as improper repair can result in serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

Only use original FEIN spare parts!

The relevant accident prevention regulations of the employers’ liability insurance associations are

to be observed when commissioning.

The German Equipment and Product SafetyAct applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed!

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 6/48 Version 1

4. Tools required

Standard tools

Torx 15 and 20 screwdrivers

Small slotted screwdriver

Arbor press

Plastic hammer

Open-ended spanner 27 mm

Cable hooks

Circlip pliers

Socket wrench 2.0 mm

Special tools

Unlocking tool

Arbor

Sleeve: Inner diameter 13 mm

Outer diameter 30 mm

Sleeve: Inner diameter 7 mm

Outer diameter 30 mm

Sleeve: Inner diameter 12 mm

Outer diameter 25 mm

Sleeve: Inner diameter 13 mm

Outer diameter 20 mm

Sleeve: Inner diameter 12 mm

Outer diameter 20 mm

Ball bearing support 30 mm

Ball bearing puller 19 mm 6 41 07 019 00 7

Ball bearing puller 28 mm 6 41 07 028 00 2

Drawing-off socket cap 6 41 04 150 00 8

Test board 6 41 340 0100 0

NOTE

You can only order special tools with an

order number from FEIN.

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 7/48 Version 1

4. Tools required

Special tools

Unlocking tool

FEIN recommends using this unlocking tool because it is designed

precisely for the plug contact used.

Manufacturer no.: 1-1579007-6 (not available from FEIN)

Manufacturer: www.te.com

Price: approx. €40

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 8/48 Version 1

5. Lubricants and auxiliary substances

required

Lubricants

ASCT 14, 18

Grease 0 40 121 0300 4 10 g Gearbox

Grease 0 40 106 0100 1 Plain bearing bush in intermediate bearing

ASCT 14U, 18U

Grease 0 40 101 0100 4 10 g Gearbox, roller bearing

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 9/48 Version 1

6. Disassembly

1. Remove battery.

2. Remove screws from gearbox head.

3. Remove gearbox head.

Tool:

-Torx 20 screwdriver

ASCT 14, 18 / 14U, 18U

FEIN retains all rights of disposal, such as copying and circulation. C-SC_CSSM 2012.09 10/48 Version 1

1. Loosen screws on upper section of housing and remove.

2. Remove belt hooks.

6. Disassembly

Tool:

-Torx 15 screwdriver

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fein Utensili elettrici

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale

Blaupunkt

Blaupunkt TIF 30 DA Manuale utente

Silca

Silca MARKER 2000 Manuale utente