EPCO
Festo – EPCO – 2017-11c English 5
The device is intended for use in an industrial environment. Measures may need to be implemented in
residential areas for interference suppression.
Note
The EPCO is non-braking. When the supply voltage is not applied, the piston rod can be
moved freely. Automatic locking of the complete system can be optionally achieved with
a holding brake in the EPCO-...-ST-B.
3 Transport and storage
Consider the weight of the electric cylinder.
Depending on the version, the EPCO can weigh up to 5 kg.
The following should be observed with regard to storage:
– Storage times should be kept to a minimum
– Store in cool, dry, well-shaded locations that do not present a risk of corrosion.
4 Prerequisites for use
Warning
Unexpectedly fast-moving masses can harm people or property (risk of crushing).
Initially, only apply limited power to the drive motor to ensure low speeds and
torques.
Note
Malfunctions will occur if the device is not used correctly.
It is vital that the stipulations contained in this section are adhered to at all times.
Take into consideration the legal regulations applicable for the destination, as well as:
– regulations and standards,
– regulations of the testing organizations and insurers,
– national specifications.
Note the warnings and instructions on the product and in the relevant operating instructions.
Remove all transport packaging, such as foils, caps and cardboard.
The material used in the packaging is intended for recycling (exception: oil paper = residual
waste).
Observe the local regulations for environmentally friendly waste management of electronic compon
ents.
Take into account the material specifications (èTechnical data chapter).
Use the product in its original state, without any unauthorised product modifications.
Take into consideration the ambient conditions at the location of use.
Corrosive environments reduce the service life of the product (e.g. ozone).
