FFES- FABRYCKI FUTURE ELECTRO IC SOLUTIO S 04.2021 PL 5
1.2 Installation
Before assembly and use of the device (detailed information in points 1.3 and 3.) you
should:
•check the completeness of equipment: control panel with mounting pocket, control
box, temperature sensor with housing and mounting elements.
•make sure that the voltage of the controller and other cooperating devices is correct.
•make sure that the model of the controller is properly selected to the power, range
of operation of the cooperating devices. Any deviation from the standard creates the
risk of fire!
•make sure that the controller together with the control panel and other devices used
in the sauna is properly matched to the cubic capacity. Any deviation from the
standard creates the risk of fire!
•Before using the sauna, check that the room meets all the requirements for sauna
bathing.
The control panel should be mounted outside the sauna in a place not exposed to
moisture.
Install the temperature sensor in the designated place indicated in the manual. Do not
install the sensor in locations subject to drafts, at doors or ventilation grilles. As this
has a negative impact on the sensor and its indications.
Remote control
Remote control is done by means of "FFES Sauna" application via Internet connection and
local Wi-Fi network. See point 2.9 for details.
Before starting the remote control with the "FFES Sauna" application, check whether
the room meets all the requirements for sauna bathing.
Any deviation from the standard creates the risk of fire!
When using remote control using the "FFES Sauna" application, you must not share
access passwords to paired devices and the password to access the Wi-Fi network used
by the devices with anyone else. This can result in loss of control of the device and lead
to DA GEROUS A D LOSS OF LIFE for people in the sauna.
