FieldServer FS-8700-74 Nota di rilascio

ASierraMonitorCompany

APPLICABILITY & EFFECTIVITY

Effective for all systems manufactured after May 1, 2001

Driver Manual

(Supplement to the FieldServer Instruction Manual)

FS-8700-74 Veeder-Root

Driver Version: 1.01

Document Revision: 3

FS-8700-74 Veeder Root Driver Manual Table of Contents

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

TABLE OF CONTENTS

Veeder-Root Driver Description..........................................................................................3

Driver Scope of Supply........................................................................................................4

2.1.

Supplied by FieldServer Technologies for this driver ...................................................4

2.2.

Provided by the Supplier of 3

Party Equipment..........................................................4

2.2.1.

Required 3

Party Hardware.....................................................................................4

Hardware Connections ........................................................................................................5

Configuring the FieldServer as a Veeder-Root Client.......................................................6

4.1.

Data Arrays...................................................................................................................6

4.2.

Client Side Connections ...............................................................................................7

4.3.

Client Side Nodes.........................................................................................................8

4.4.

Client Side Map Descriptors.........................................................................................8

4.4.1.

FieldServer Specific Map Descriptor Parameters .....................................................8

4.4.2.

Driver Specific Map Descriptor Parameters..............................................................9

4.4.3.

Timing Parameters....................................................................................................9

4.4.4.

Map Descriptor Example 1 - Alarms........................................................................10

4.4.5.

Map Descriptor Example 2 - Inventory....................................................................11

4.4.6.

Map Descriptor Example 3 – Most Recent Delivery Report....................................12

Configuring the FieldServer as a (Veeder-Root Driver) Server......................................13

Appendix A.

Advanced Topics............................................................................................14

Appendix A.1.

Data Type and Required Lengths .................................................................14

Appendix A.2.

Supported Functions.....................................................................................15

Appendix A.3.

Alarm Types..................................................................................................16

Appendix A.4.

Security Codes..............................................................................................20

Appendix B.

Trouble Shooting and Driver Error Messages .............................................21

Appendix B.1.

Driver Stats....................................................................................................24

Appendix B.2.

Table of Module Types..................................................................................25

Appendix C.

Advanced Map Descriptor Examples............................................................26

Appendix C.1.

Advanced Example 1 – Polling for Tank / Sensor / Input / Relay / Device

Status 26

Appendix C.2.

Advanced Example 2 – Resetting Remote Alarms .......................................27

Appendix C.3.

Advanced Example 3 – System Configuration..............................................27

Appendix C.4.

Advanced Example 4 – System Diagnostics.................................................28

Appendix C.5.

Advanced Example 5 – System Revision Level Report................................29

Appendix C.6.

Advanced Example 6 – System Revision Level Report II.............................30

Appendix C.7.

Advanced Example 7 – Stick Height Report ................................................31

Appendix C.8.

Advanced Example 8 – Active Alarm Report................................................31

Appendix C.9.

Advanced Example 9 – Cleared Alarm Report .............................................32

FS-8700-74 Veeder Root Driver Manual Page 3 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

1. Veeder-Root Driver Description

The Veeder-Root Serial Driver allows the FieldServer to transfer data to and from devices over

either RS-232 or RS-485 ports using Veeder-Root protocol as defined in Veeder Root

Document 576013-635 Revision J.

The FieldServer emulates a Client.

The Veeder-Root Serial Driver is a poll response driver. Only one query or command can be

processed at a time.

A limited set of the queries and commands defined in the protocol specification have been

implemented. The reason for the limitation is two-fold. Firstly, not all commands/queries will

have any meaning to a downstream device as they are principally defined to configure the

Veeder-Root Device. Secondly some commands return very complex data sets which cannot

be processed in a method suitable for loading into the FieldServer’s Data Arrays.

The driver is capable of exposing its communications statistics. This can be useful if you wish

to monitor them using a downstream device. In this way you can ensure that you are using

valid data and can generate alarms if communication problems arise.

FS-8700-74 Veeder Root Driver Manual Page 4 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

2. Driver Scope of Supply

2.1. Supplied by FieldServer Technologies for this driver

FieldServer Technologies

PART # Description

FS-8915-10 UTP cable (7 foot) for RS-232 use

FS-8917-01 RJ45 to DB25M connection adapter

FS-8700-74 Driver Manual.

2.2. Provided by the Supplier of 3

Party Equipment

2.2.1. Required 3

Party Hardware

PART # DESCRIPTION

Veeder-Root Panel

FS-8700-74 Veeder Root Driver Manual Page 5 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

3. Hardware Connections

The FieldServer is connected to the Veeder-Root Panel as shown below.

Configure the Veeder-Root Panel according to manufacturer’s instructions.

DATE: 1/17/02

BY: MN

(408)-262-2299

BASE NAME:

FILE NAME: FS-T28700-74 .VSD

VEEDER ROOT

CONNECTION DIAGRAM

P4P1

P2 P3

Tx Rx Tx

TxRx Rx P7P5 P6

Tx Rx Tx TxRx Rx P8 R1

Tx Rx Tx Rx Tx

R2 Ne t 1

TxRx RxTx Con

Net 2

Sys

Com

Tx Rx Con

Act

Run

Pwr

RS485

RS232 10 Base T

ETHERNET

P1 P7 R1P2 R2

P3 P4 P5 P6 P8 N1 N2

8917-07

FieldServer

FIELDSERVER

FUNCTION FROM TO COLOR

RX RJ45-01 DB25M-02 WHITE

CTS RJ45-02 DB25M-05 BROWN

DSR RJ45-03 DB25M-08 YELLOW

GND RJ45-04 DB25M-07 GREEN

DTR RJ45-06 DB25M-20 BLACK

RTS RJ45-07 DB25M-06 ORANGE

TX RJ45-08 DB25M-03 BLUE

TLS-350

8917-07 WIRE LIST

RJ45 CAT 5 Cable

Connect to

RS232 port P1-P8

FS-8700-74 Veeder Root Driver Manual Page 6 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

4. Configuring the FieldServer as a Veeder-Root Client

For a detailed discussion on FieldServer configuration, please refer to the FieldServer

Configuration manual. The information that follows describes how to expand upon the factory

defaults provided in the configuration files included with the FieldServer.

This section documents and describes the parameters necessary for configuring the FieldServer

to communicate with a Veeder-Root Device.

The configuration file tells the FieldServer about its interfaces, and the routing of data required.

In order to enable the FieldServer for Veeder-Root Driver communications, the driver

independent FieldServer buffers need to be declared in the “Data Arrays” section, the

destination device addresses need to be declared in the “Client Side Nodes” section, and the

data required from the Servers needs to be mapped in the “Client Side Map Descriptors”

section. Details on how to do this can be found below.

Note that in the tables, * indicates an optional parameter, with the bold legal value being the

default.

4.1. Data Arrays

Section Title

Data_Arrays

Column Title Function Legal Values

Data_Array_Name Provide name for Data Array Up to 15 alphanumeric

characters

Data_Format Provide data format. Each Data

Array can only take on one format.

FLOAT, BIT, UInt16, SInt16,

Packed_Bit, Byte,

Packed_Byte, Swapped_Byte

Data_Array_Length

Number of Data Objects. Must be

larger than the data storage area

required for the data being placed in

this array.

1-10,000

Example

// Data Arrays

Data_Arrays

Data_Array_Name, Data_Format, Data_Array_Length

DA_AI_01, UInt16, 200

DA_AO_01, UInt16, 200

DA_DI_01, Bit, 200

DA_DO_01, Bit, 200

FS-8700-74 Veeder Root Driver Manual Page 7 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

4.2. Client Side Connections

Section Title

Connections

Column Title Function Legal Values

Port Specify which port the device is

connected to the FieldServer P1-P8, R1-R2

Baud* Specify baud rate 300 – 9600, standard baud rates

only – Vendor limitation.

Parity* Specify parity Even, Odd, None

Data_Bits* Specify data bits 7, 8

Stop_Bits* Specify stop bits 1, 2

Protocol Specify protocol used Vroot, Veeder

Handshaking* Specify hardware handshaking None

Poll Delay* Time between internal polls 0-32000 seconds, 1 second

Example

// Client Side Connections

Connections

Port, Baud, Parity, Protocol, Handshaking, Poll_Delay

P1, 9600, None, Vroot, None, 0.100s

Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction

manual for details of the ports available on specific hardware.

FS-8700-74 Veeder Root Driver Manual Page 8 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

4.3. Client Side Nodes

Section

Title

Nodes

Column

Title Function Legal Values

Node_Name Provide name for node Up to 32 alphanumeric

characters

Node_ID This commonly used parameter is not required for this driver.

Protocol Specify protocol used Vroot, Veeder

Port

Specify which port the device is connected

to the FieldServer

Only one node per port.

P1-P8, R1-R2

*Route

This parameter is only required if security

is enabled on the Veeder-Root device.

In this case the route must be set to

contain the 6 digits that form the security

code.

Example. If the security code is 556741

then enter route as

5.5.6.7.4.1

a.b.c.d.e.f

a,b,c,d,e,f must be decimal

digits in the range 0 to 9.

Example

// Client Side Nodes

Nodes

Node_Name, Protocol, Port

VR_Node1 , Vroot , P1

4.4. Client Side Map Descriptors

4.4.1. FieldServer Specific Map Descriptor Parameters

Column Title Function Legal Values

Map_Descriptor_Name Name of this Map Descriptor Up to 32 alphanumeric

characters

Data_Array_Name Name of Data Array where

data is to be stored in the

FieldServer

One of the Data Array names

from “Data Array” section

above

Data_Array_Location Starting location in Data Array 0 to maximum specified in

“Data Array” section above

Function Function of Client Map

Descriptor RDBC, WRBC, WRBX

Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction

manual for details of the ports available on specific hardware.

FS-8700-74 Veeder Root Driver Manual Page 9 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

4.4.2. Driver Specific Map Descriptor Parameters

Column

Title Function Legal Values

Node_Name Name of Node to fetch data from One of the node names

specified in “Client Node

Descriptor” above

Data_Type Data type

System, Tank, Liquid Sensor,

Vapor Sensor, Input,

Volumetric Line, Groundwater

Sensor, Type-B Sensor,

Universal Sensor, Auto-Dial,

Mech. Dispenser, Elec.

Dispenser, Product, Press.

Line, External, WPLLD

*Address

The address is used to specify the

Tank/Sensor/Input /Relay … Number to

be used in the poll. For some data

types the address has no meaning and

should be set to 1.

Veeder-Root Tanks / Sensors … are

numbered from 1. The maximum tank

number is 12 and the maximum sensor

number if 64.

When zero is used as the value of the

address then (in most cases) the driver

polls for all Tanks/ Sensors belonging

to that data type. This is discussed in

the Advanced Topics Section.

0, 1, 2, 3…

Length

Length of Map Descriptor

The length is used to tell the driver how

many elements of the Data Array are

under the control of the Map Descriptor.

This is important because the driver

uses the length to, for example, clear

Data Array elements when a

Tank/Sensor has no alarms.

1 - 1000

4.4.3. Timing Parameters

Column Title Function Legal Values

Scan_Interval Rate at which data is polled >0.1s

See Appendix A.1 for Data Type, Address and Length Limitations.

FS-8700-74 Veeder Root Driver Manual Page 10 of 33

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com

Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: [email protected]

4.4.4. Map Descriptor Example 1 - Alarms.

This example provides one Map Descriptor to poll for alarm data and many Map Descriptors to store the response from the poll. One

Map Descriptor is required for each tank/sensor/input/device defined for the system. The address of each of these passive Map

Descriptors must correspond to the tank/sensor/input/device number. For example, where 5 tanks are defined as tanks 1,2,3,6,7

then 5 Map Descriptors with the data type ‘Tank’ are required and the address of each of these 5 Map Descriptors must be set to

1,2,3,6,7. The length parameter tells the driver how much array space is reserved for each tank/sensor… for storing alarms.

Map_Descriptors

Map_Descriptor_Name, scan_interval, Data_Array_Name, Data_Array_Offset, Function, node_name, Address, Length, Data_Type,

Poller 1.0s , DA_101 , 0 , rdbc , Node_A , 1 , 30 , System Status

Map_Descriptors

Map_Descriptor_Name, Data_Array_Name, Data_Array_Offset Function, node_name, Address, Length, Data_Type

Sys_alms01 , DA_S1 , 0 , passive , Node_A , 1 , 30 , System

Tank_Alms1 , DA_T1 , 0 , passive , Node_A , 1 , 30 , Tank

LiqSensor_Alm1, DA_L1 , 0 , passive , Node_A , 1 , 30 , Liquid Sensor

VaporSens_Alm1, DA_V1 , 0 , passive , Node_A , 1 , 30 , Vapor Sensor

Input_Alm1 , DA_I1 , 0 , passive , Node_A , 1 , 30 , Input

VolLine_Alm1 , DA_O1 , 0 , passive , Node_A , 1 , 30 , Volumetric Line

GWater_Alms1 , DA_G1 , 0 , passive , Node_A , 1 , 30 , Groundwater Sensor

TypeB_SensALm1 , DA_B1 , 0 , passive , Node_A , 1 , 30 Type-B Sensor

Univ_SensAlm1 , DA_U1 , 0 , passive , Node_A , 1 , 30 , Universal Sensor

AutoDial_Alms1 , DA_F1 , 0 , passive , Node_A , 1 , 30 , Auto-Dial

MechDisp_Alm1 , DA_M1 , 0 , passive , Node_A , 1 , 30 , Mech. Dispenser

ElecDisp_Alm1 , DA_E1 , 0 , passive , Node_A , 1 , 30 , Elec. Dispenser

Product_Alms1 , DA_P1 , 0 , passive , Node_A , 1 , 30 , Product

PressLine_Alm1 , DA_R1 , 0 , passive , Node_A , 1 , 30 , Press. Line

External_Alm1 , DA_X1 , 0 , passive , Node_A , 1 , 30 , External

WPLLD_Alms1 , DA_W1 , 0 , passive , Node_A , 1 , 30 , WPLLD

Only the Map

Descriptor used to

generate the poll

requires a scan

interval.

These Map

Descriptors are

passive because

they do not

generate

messages. They

are used to store

data returned by

the system status

poll.

The address must

correspond to the

tank/sensor/input/device

number.

One Map Descriptor

required for each

tank/sensor/input/device.

The length parameter tells the driver how much array space must be reserved

for storing alarms for a given tank/sensor/input/device.

When an alarm occurs for tank 1 the driver stores the alarm type by setting

the array position corresponding to the alarm type to a non-zero value as well

as setting the first element of the reserved space non-zero as a summary.

See Table 6.3 for alarm type numbers and descriptions.

Example: Tank 1 has two alarms

02 = Tank Leak Alarm

05 = Tank Low Product Alarm

The driver sets array DA_T1 as follows

Index=0 : Value=1 (Summary)

Index=2 : Value=2 (Leak)

Index=5 : Value=5

(

Product

)

Indice

Altri manuali FieldServer Hardware di rete

FieldServer

FieldServer Envirotronics SystemsPlus FS-8700-88 Nota di rilascio

FieldServer

FieldServer Profibus FS-8700-113 Nota di rilascio

FieldServer

FieldServer Gamewell FCI 7100 Series Nota di rilascio

FieldServer

FieldServer FS-8700-72 Manuale utente

FieldServer

FieldServer A Sierra Monitor Company FS-8700-122 Nota di rilascio

FieldServer

FieldServer FS-8700-22 X30 Nota di rilascio

FieldServer

FieldServer FS-8700-03 DF1 Nota di rilascio

FieldServer

FieldServer Optomux FS-8700-17 Nota di rilascio

FieldServer

FieldServer Lutron Machine FS-8700-97 Nota di rilascio

FieldServer

FieldServer Hanning FS-8700-127 Nota di rilascio

FieldServer

FieldServer Omron FINS FS-8704-16 Nota di rilascio

FieldServer

FieldServer Data Aire (DAP) FS-8704-49 Nota di rilascio

FieldServer

FieldServer Weigh-Tronix FS-8700-36 Nota di rilascio

FieldServer

FieldServer Genisys FS-8700-133 Nota di rilascio

FieldServer

FieldServer LonWorks FS-8700-21 Nota di rilascio

FieldServer

FieldServer Modbus Plus FS-8700-02 Nota di rilascio

FieldServer

FieldServer Modbus Daniels FS-8700-15 Nota di rilascio

FieldServer

FieldServer ControlNet FS-8700-24 Nota di rilascio

FieldServer

FieldServer Canatal Satchnet Driver FS-8700-59 Nota di rilascio

FieldServer

FieldServer Telnet FS-8704-11 Nota di rilascio

FieldServer

FieldServer Hanning FS-8700-127 Nota di rilascio

FieldServer

FieldServer Spectronics FS-8700-42 Nota di rilascio

FieldServer

FieldServer Gamewell FS-8700-83 Nota di rilascio

FieldServer

FieldServer ProtoCessor ProtoNode FPC-N34 Guida utente

Manuali Hardware di rete popolari di altre marche

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuale utente

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuale utente

Yudor

Yudor YDS-16 Manuale utente

D-Link

D-Link ShareCenter DNS-320L Manuale utente

Samsung

Samsung ES1642dc Istruzioni per l’uso

Honeywell Home

Honeywell Home LTEM-PV Istruzioni per il montaggio

evertz

evertz 7700 Series Manuale utente

D-Link

D-Link ShareCenter DNS-343 Manuale utente

Asante

Asante AsanteBridge 1012 Manuale utente

FireBrick

FireBrick FB2700 Manuale utente

Audiovox Electronics

Audiovox Electronics ARWH2T Manuale utente

ADC

ADC DSX-1 Manuale

NetComm

NetComm NF2 Manuale utente

Alcatel-Lucent

Alcatel-Lucent 5620 Manuale utente

Dell EMC

Dell EMC XC6420 Series Manuale utente

Lanner

Lanner NCA-1020A Manuale utente

Allied Telesis

Allied Telesis AT-TN121-A Manuale utente

Arista

Arista CCA-ETM-Q12 Manuale utente