FitLogic MIRACLE V570 Manuale utente
Read all the instructions carefully before
assembling and using this product. Retain this
owner’s manual for the future’s reference.
!
2
1. Plug the power cord of the treadmill directly into a dedicated grounded circuit. This
product must be grounded well. If it has breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock.
2. Position the treadmill on a clean and flat surface with at least 2m*1m area. Do not
place the treadmill on thick carpet as it may interfere with proper ventilation. Also, do
not place the treadmill near water or outdoors.
3. Position the treadmill where the wall plug is visible and accessible.
4. NEVER start the treadmill while you are standing on the walking belt. After turning
the power on and adjusting the speed control, there may be a pause before the
walking belt begins to move, ALWAYS stand on the foot rails on the sides of the frame
until the belt is moving.
5. Wear appropriate clothing when exercising on the treadmill. Do not wear long,
loose fitting clothing that could become caught in the treadmill. Always wear running
or aerobic shoes with rubber soles.
6. Always unplug the power cord before removing the treadmill motor cover.
7. Keep small children away from the treadmill during operation.
8. Always hold the handrails when initially walking or running on the treadmill, until
you are comfortable with the use of the treadmill.
9. Always attach the safety pull pin rope to your clothing when using the treadmill. If
the treadmill should suddenly increase in speed due to an electronics failure or the
speed being inadvertently increased, the treadmill will come to a sudden stop when
the pull pin is disengaged from the console.
IMPORTANT SAFETY PRECAUTIONS
3
10. When the treadmill is not being used, the power cord should be unplugged and
the safety pull pin should be removed.
11. Before starting any exercise program, consult with your physician or health
professional. He or she can help to establish the exercise frequency, intensity (target
heart zone) and time appropriate to your particular age and physical condition. If you
have any pain or tightness in your chest, an irregular heartbeat, shortness of breath,
feel faint or have any discomfort while you exercise, STOP IMMEDIATELY! Consult
your physician before continuing.
12. If you observe any damage or wear on the mains plug or on any section of the
mains lead then please have these replaced immediately by a qualified electrician –
do not attempt to change or repair these yourself.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
14. Put your feet on the side rail before using the treadmill, and always attach the
safety pull pin rope to your clothing. Hold the handle bar before the running belt
moving well ( feel the running speed by your single foot before using it). To avoid loss
balance, please slow down the speed to the lowest or take off the safety. And hold the
handle bar to jump to the side rail when emergency or the safety key is not attached.
15. The treadmill is for home use only.
IMPORTANT SAFETY PRECAUTIONS
4
When you open the carton, you will find the below spare parts:
Spare parts list:
NO.
DESCRIPTION
SPEC
QTY
NO.
DESCRIPTION
SPEC
QTY
1
CONSOLE MAIN FRAME
1
31
Right Bottom
Decoration Case
1
9
LEFT HANDLE BAR
1
86
BOLT
M8*16
8
10
RIGHT HANDLE BAR
1
90
BOLT
M8*35, M8
2
16
ALLEN WRENCH WITH
SCREW DRIVER
S=13, 14,
15
1
92
BOLT
M8*42
2
17
5#ALLEN WRENCH
5 mm
1
104
BOLT
M6*12
6
23
LEFT OUTTER COVER
1
107
SCREW
ST4.2*12
10
26
RIGHT OUTTER COVER
1
108
SCREW
ST4.2*13
8
30
Left Bottom Decoration
Case
1
122
4# ALLEN WRENCH
4 mm
1
Assembly tools:
Allen Wrench: 5mm 1pc,
Allen Wrench With Screw Driver :S=13、14、15 1pc
ASSEMBLY INSTRUCTIONS
5
Notice: Do not turn power on before assembly is done.
Step 1:
Step 2:
Step 3:
Open the carton，take out the
spare parts，and put the MAIN
FRAME on the ground.
Turn the computer and the
upright frame up.
Attention: Don’t press the
wires inside the upright
frame when folding. Hold
the computer and upright
frame to avoid dropping.
Use 5# Allen wrench, lock the
left & right upright tubes (#3 &
#4) onto the base main frame
with M8*16 bolt (#86), and lock
washer (#115).
Attention: Hold the left and
right upright tubes to avoid
dropping.
ASSEMBLY STEPS
6
Step 4:
Step 5:
Connect the hand pulse wire.
Use 4# Allen wrench, lock the
left and right handle bar
(#9,#10) onto the upright
upper frame (#3,#4) by
M6*12 bolt (#104).
Use 5# Allen wrench, turn the
computer to the right position
according to the arrow direction
shown as the picture. Lock the
console main frame (#1) onto
the upright upper frame by
M8*35 bolt (#90) and lock
washer. And then lock the bolt
on the position “A”.
Attention: Please fix the treadmill well according to the above steps,
and then go to the next step of assembling the plastic covers.
7
Step 6:
Step 7:
Use Allen wrench with screw
driver, lock the left & right
outer cover (#23,#26) onto
the upright upper frame
(#3,#4) by screw 4.2*13
(#108).
1. Put the left and right bottom
decoration case (#30,#31)
onto the base main frame
(#5), then lock them with
ST4.2*12 screw (#107) by
Allen wrench with screw driver.
Attention: Please don’t put the power on until you make sure that
all the above steps are finished and all the bolts are tightened
well. Please also read all the following instructions when you
operate the treadmill.
8
Folding up:
Releasing down:
Hold the place A, and pull up
the main frame up as the arrow
direction till you hear the sound
of the round spring knob
(#142).
Hold the place A, pull out the
round spring knob (#142), and
push the running deck a little
bit, then the running deck will
drop down slowly.
FOLDING INSTRUCTION
9
TECHNICAL PARAMETER
BUILT UP
SIZE(mm)
1847*810*1317mm
FOLDABLE
SIZE(mm)
1064*810*1656mm
RUNNING
BOARD(mm)
510*11420mm
NET WEIGHT
89 KG
MAX USE’S
WEIGHT
125 KG
SPEED RANGE
1.0-20KM/h
INCLINE LEVEL
0-15%
ONE LCD
DISPLAY
WINDOW
SPEED,TIME,DISTANCE,CALORIES,PULSE INCLINE
10
GROUND GUIDE
This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce the
risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER –Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. Check with a qualified electrician or serviceman
if you are in doubt as to whether the product is properly grounded. Do not
modify the plug provided with the product –if it will not fit the outlet; have a
proper outlet installed by a qualified electrician. This product is for use on a
nominal 120-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Make that the product is connected to
an outlet having the same configuration as the plug. No adapter should be used
with this product.
Indice
Lingue:
Altri manuali FitLogic Tapis roulant
FitLogic
FitLogic freewill d225 Manuale utente
FitLogic
FitLogic MIRACLE R280 Manuale utente
FitLogic
FitLogic MIRACLE R270 Manuale utente
FitLogic
FitLogic Miracle V380 Manuale utente
FitLogic
FitLogic YK-ET1402B Manuale utente
FitLogic
FitLogic FREEWILL R115 Manuale utente
FitLogic
FitLogic YK-ET1403A Manuale utente
