FLAIM Systems Extinguisher Manuale utente

FLAIM Systems User Guide Version 1

www.flaimsystems.com

FS-FE-UM2019.1

User Manual

FLAIM Extinguisher™

Version 1

September 2019

FLAIM Systems User Guide Version 1 
 
FLAIM Systems Pty Ltd Copyright ©2019 
www.flaimsystems.com 
2 
 
OVERVIEW..................................................................................................................................4 
WHAT’S IN THE BOX...................................................................................................................5 
Quick Start Guide .......................................................................................................................7 
Instructor Viewing System.....................................................................................................7 
Step 3 –VR headset setup .........................................................................................................8 
HOW TO USE FLAIM EXTINGUISHER........................................................................................11 
Streaming to Video Screen (projector or television) ...............................................................11 
Scenarios Menu tab .................................................................................................................12 
Running scenarios....................................................................................................................13 
Technique Tab..........................................................................................................................15 
Info Tab ....................................................................................................................................15 
Fault Finding.............................................................................................................................16 
Battery Charging ......................................................................................................................17 
Safety .......................................................................................................................................17 
Use conditions......................................................................................................................17 
Maintenance ............................................................................................................................17 
Further Support .......................................................................................................................17 
 
 
 
 

FLAIM Systems User Guide Version 1

www.flaimsystems.com

Figure 1 Inside the FLAIM Extinguisher box (case) ....................................................................5

Figure 2 FLAIM Extinguisher System box (case) ........................................................................5

Figure 3 Instructor Viewing System ...........................................................................................7

Figure 4 Step 3. Ensure HDMI receiver is powered (Blue light) –top right...............................8

Figure 5 HDMI Receiver ready to connect screen .....................................................................8

Figure 6 HDMI Receiver screensaver mode...............................................................................8

Figure 7 Vive Focus controller re-centre screen........................................................................9

Figure 8 FLAIM is launched by selecting the EXT logo.............................................................11

Figure 9 Video Receiver Connection........................................................................................12

FLAIM Systems User Guide Version 1

www.flaimsystems.com

OVERVIEW

Thank you for purchasing the FLAIM Extinguisher™virtual reality (VR) fire extinguisher

training system from FLAIM Systems.

This manual should get you on your way in no time and is aimed at trainers with minimal

understanding of virtual reality.

The FLAIM Extinguisher system is designed to allow fire extinguisher training anywhere - in

the comfort of your own factory or office. The system provides realism to your training but

there is no messy clean-up, use of expensive extinguishing agents and is environmentally

friendly.

New scenarios will be added to our library for different fire types and locations. This will

allow first responders, fire wardens and the public to develop their skillsets in a safe,

repeatable and realistic way.

FLAIM Extinguisher provides the capacity to train situations and scenarios that are:

•Inherently unsafe and difficult to reproduce.

•No longer possible due to environmental, community and regulatory constraints.

•Incur significant training cost in time, people and assets.

FLAIM Extinguisher gives trainees in the most realistic training scenario available.

Once again, thank you for your support.

The FLAIM Systems team

FLAIM Systems User Guide Version 1

www.flaimsystems.com

WHAT’S IN THE BOX

Please see below images of the individual parts that come in your FLAIM Extinguisher

box/case (Figure 1 and 2) with an explanation of what they do.

Figure 1 Inside the FLAIM Extinguisher box (case)

Figure 2 FLAIM Extinguisher System box (case)

FLAIM Systems User Guide Version 1

www.flaimsystems.com

Part Number

Quantity

Description

Picture

VR headset - HTC Vive Focus Head

Mounted Display (HMD)

Extinguisher controller tracking

system

Power cable for Head Mounted

Display

HDMI receiver

Charge plug (country specific) for

charging Vive Focus.

Country specific power cable and

power adaptor for HDMI receiver

power supply (configuration may

vary in different countries)

HDMI extension cable

FLAIM Systems User Guide Version 1

www.flaimsystems.com

Quick Start Guide

This section covers the basic setup, how to use and run the FLAIM Extinguisher Training

System.

Ensure you have adequate working space. Some scenarios require the trainee to walk

closer to the fire to extinguish. FLAIM recommends 4m x 4m (13ft x 13ft) minimum.

Instructor Viewing System

The Instructor Viewing System (Figure 3) receives the signal transmitted by the FLAIM

Extinguisher VR headset. It allows the instructor and others in the room to experience a live

view of what the person being trained can see in the virtual training environment.

The instructor viewing system consists of a HDMI receiver that connects to a TV/Projector

(not supplied) via a supplied HDMI cable.

Figure 3 Instructor Viewing System

Step 1

1. Plug the micro USB lead into the USB port on your television and projector.

2. When powered, the receiver power light will glow blue (see Figure 4).

The USB Power supply delivers power to the HDMI receiver. Some systems cannot

supply enough power from their in-built USB port. If there is no light it is likely that

your system cannot supply enough power from its in-built USB port. If this occurs,

please use the included power supply. Retry with power supply connected –you

should now see a blue light on the power receiver (see Figure 4).

FLAIM Systems User Guide Version 1

www.flaimsystems.com

Figure 4 Step 3. Ensure HDMI receiver is powered (Blue light) –top right

Step 2

1. Select the source –television or projector.

You will now see the Ready to Connect screen (Figure 5) on your television or

projector. If the system is inactive for five minutes or longer a screensaver will

activate (Figure 6).

Figure 5 HDMI Receiver ready to connect screen

Figure 6 HDMI Receiver screensaver mode

Step 3 –VR headset setup

1. Remove the VR headset - Vive Focus HMD from the box/case.

2. To power on the VR headset, hold down the power button (on the top right side of

the headset for up to 5 seconds).

3. Put on the VR headset. Ensure it is fitted firmly. To tighten the fit for the user, the

VR headset can be adjusted at the back via the adjustment knob and on top of the

head using the strap.

You will know the headset is ON when you see the Vive Focus logo.

The user now needs to adjust the lens on the base of the headset –until the visual is clear.

FLAIM Systems User Guide Version 1

www.flaimsystems.com

Step 5 - Setting up the Controller

1. If a sole user - remove the headset. If two or more people –trainer should execute

this step.

2. To turn on the controller - hold down the bottom button. On-screen prompts will now

appear for the user in the headset. If not working check the Vive Focus Controller

has batteries installed.

Congratulations you are now ready to use FLAIM Extinguisher - follow the on-screen

prompts and proceed to the How to use FLAIM Extinguisher section of this manual.

SET-UP TROUBLESHOOTING

•If prompted to re-centre

Reset with controller (trainer)

To re-centre the virtual world using the controller get the user to move their hand that

is holding the controller forward and hold down the bottom button on the controller for

5 seconds.

Reset with VR headset (user)

To re-centre the virtual world using the VR headset –remove from head. Hold the

VR headset above your head for 5 seconds. Place the headset back on. Ensure that

you do not cover the cameras on the front of the VR headset while you reset. This

obstructs the tracking technology.

Figure 7 Vive Focus controller re-centre screen

FLAIM Systems User Guide Version 1

www.flaimsystems.com

To access the Quick Menu hold the bottom button- at any time. A menu will pop up

–providing an option to return to the Vive Focus home screen.

To SHUTDOWN at any time hold down the power button on the VR headset for 3

seconds. A pop-up menu will allow you to select shutdown or restart with the

controller. Click away to cancel.

To adjust the volume use the controls on the bottom left-hand side of the VR

headset.

To charge the VR headset, plug the supplied charger cable into the USB C port on

the top of the headset and the USB end into the supplied wall plug.

Possible error messages

Server access failure

If you are not connected to the internet you will receive a pop-up message - Check

your network or try again later - on the home screen. Internet is not required to

run the FLAIM Extinguisher trainer –just close the popup by selecting the OK button.

No Internet Connection, please check or choose another WiFi. Internet is NOT

required to operate the FLAIM Extinguisher trainer. Click Cancel to proceed.

Altri manuali per Extinguisher

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente