Flebi EOLO Manuale utente
User’s Manual
Índice
Unpacking and assembly
1. Contents of the box
2. Install handlebars
3. Packed in original box
Setting up
4. Adjusting the handlebars
5. Adjusting the saddle
6. Disc brake adjustment
7. Shift adjustment
8. Wheel adjustment
9. Tyre inflation
Electrical operation
10. Battery removal/insertion
11. Installing extendable battery
12. Recharging the battery
13. EN067 / DZ41 TFT Full colour display
operation
14. Throttle operation (optional)
Folded & unfolded
15. Unfolding the bike
16. Folding the bike
17. Opening / closing the frame
18. Folding / unfolding of the pedals
19. Handlebar folding mechanism
Unpacking and assembly
Contents of the box
The assembly of your Flebi Eolo is very easy!
The Flebi Eolo is equipped with a 36 V / 250
W motor and reaches a maximum speed of
25 km/h.
- Take the bike out of the box
- Remove the guards
- Put away the battery keys
- Unfold the bike
- Install the handlebars
- Fit the seat post on the frame
- Check the adjustment of wheels, brakes
and gears
- Check tyre pressure
- Connect the battery
Check the contents of the box:
- Flebi Eolo bike, battery in seat post, safety
keys.
- Battery charger 1Video: https://youtu.be/uZVlWrVPy14
If you want, you can discover your new Flebi Eolo virtually in
this video: https://youtu.be/caN1wSCklY8
Unpacking and assembly
Install handlebar
To install the handlebar and the
telescopic seatpost that allows height
adjustment, simply insert it into the
handlebar stem following the guides you
will find.
Once inside, bring it up to the mark and
tighten the locking key firmly.
2Video: https://youtu.be/LGLZHCgfDFo
Unpacking and assembly
Packed in original box
In case you have to repack your bike in its
original box to send it to Flebi service, we
recommend that you follow the steps below to
protect it as well as possible and avoid bumps
and scratches during transport:
- Cover the parts with guards
- Remove the seat post and remove the
handlebar assembly.
- Fold the bike
- Put it in the box
- Place the cork fixing the front wheel
- Place the pedal on a guard
- Move the front folding lever inwards
3Video: https://youtu.be/uZVlWrVPy14
Setting up
Adjusting the handlebar
You can adjust the height of the
handlebars to suit your height. To do this,
open the telescopic lock and place the
stem in the desired position, taking care
not to exceed the safety mark. Then
tighten the lock firmly so that it does not
move.
You can also use this same adjustment to
correct slight deviations in the direction of
the bike. Open the lock, turn the
handlebars to the left or right to find the
correct alignment, and retighten the lock.
4Video: https://youtu.be/2KdjO_pHqMk
Setting up
Adjusting the saddle
You can also adjust the saddle height to
suit your height. To adjust the hardness
you must tighten the thread according
to your taste. Make sure it is not too
loose or the seat post will move.
To change the angle of the saddle, you
can use a number 13 spanner to set the
saddle angle. Remember to tighten it
well.
5Video: https://youtu.be/3bP7nY1_of0
Setting up
Disc brake adjustment
CAUTION: The Eolo brakes are fully adjusted
at the factory and no adjustments are
necessary unless they loosen with use.
To adjust the mechanical disc brake, first
loosen the bolts on the frame to allow some
movement of the caliper.
Next, you will have to act on the pad
adjuster on the inner side of the pad.
Finally, you must press the brake to tighten
the cable and thus compress the caliper on
the disc to align, without loosening the brake
cable.
6Video: https://youtu.be/2HQfyaYo0aw
Setting up
Shift adjustment
CAUTION: the Eolo shifts come fully
adjusted from the factory and no
adjustments are necessary unless they
become loose with use.
If you notice that it does not change gear
cleanly, adjust the derailleur with the chain
on the smallest sprocket, adding or
removing tension as needed. This can also
be done directly on the shifter.
The Eolo features 7-speed derailleurs and
shifters that ensure fast and precise upshift
and downshift performance.
7Video: https://youtu.be/2HQfyaYo0aw
Speeds:
1. for hills
2. minor slopes
3. intermediate speed
4. for normal riding
5. intermediate speed
6. for downhill
7. for more favourable descents
Setting up
Wheel adjustment
CAUTION: the wheels of the Eolo are fully
adjusted from the factory and no adjustments
are necessary unless they become loose with
use.
Front wheel: to install the front wheel, you must
check if there is any blocking element in the
brake pads, lift the wheel and place it taking into
account the alignment of the brake disc inside
the caliper. In the video we explain it step by
step.
Rear wheel: to remove it, we recommend turning
the bike upside down to work more comfortably
(be careful with the display and levers). Place the
derailleur on the smallest sprocket, loosen the
nuts (key number 18), unplug the motor cable
(pay attention to the video) and release the
wheel. To put it back on, follow the opposite
order. In the video we explain it step by step.
8
Videos:
Front wheel: https://youtu.be/u--ZoDodOMU
Rear wheel engine: https://youtu.be/Z7hujY9nXpE
Indice
Altri manuali Flebi Bicicletta
