Flebi SUPRA 3.0 Manuale utente
User manual
Index
Unpacking & assembly
1. Box content
2. Introduction of the set handlebar
3. Packed in original box
Start up
4. Handlebar adjustment
5. Saddle adjustment
6. Disc Brake adjustment
7. Nexus 3 / 7 changes
8. Tyre inflation
9. Chain placement
Electrical operation
10. Battery removal
11. Battery recharge
12. Operation C300U display
13. Throttle operation (optional)
Folding & Unfolding
14. Unfolding the bike
15. Folding the bike
16. Swingarm operation
17. Opening/Closing the frame
18. Folding/Unfolding the pedals
19. Handlebar folding mechanism
20. Quick fold easy-folding
21. Drag on the training wheels
Parts of Flebi Supra 3.0
22. Discovering your Flebi
Unpacking & assembly
Box contents
Assembling your Flebi Supra 3.0 is very easy!
Flebi Supra 3.0 is equipped with a 36 V / 250
W motor and reaches a top speed of 25
km/h.
Take the bike out of the box
- Remove the protections
- Save the battery keys
- Unfold the bike (see 14)
- Insert the handlebar assembly (see 2)
- Place the seat post on the frame
Check thebox contents:
-Flebi Supra 3.0 bicycle with integrated
battery in the frame and security keys
- Battery charger
- Rear light with battery
1Video: https://youtu.be/40EJnKaZ7ZA
Unpacking & assembly
Introduction of the set
handlebar
2Video: https://youtu.be/I1Ea4KkzVsI
To install the assembly made up of the
handlebar and the telescopic seatpost
that allows you to adjust the height, you
simply have to insert it into the stem of
the handlebar following the guides that
you'll find.
Once inside, take it to the mark and
tighten the closing key firmly.
Unpacking & assembly
Packing in original box
In the event that you have to repackage
your bike in its original box to send it to
Flebi's technical service, we recommend
that you follow the steps below to protect
it as best as possible and avoid bumps and
scratches during transport:
- Cover the parts with protections
- Remove the seat post and remove the
handlebar assembly
- Fold the bike (see 15)
- Put it in the box
- Place the cork fixing the front wheel
- Rest the pedal on a protection
- Put the front folding lever inwards
3Video: https://youtu.be/4y2VZKfr4pA
Start up
Handlebar adjustment
You can adjust the height of the
handlebar to accommodate your height.
To do this, open the telescopic closure
and place the seatpost in the desired
position, taking care not to exceed the
safety mark. Then tighten the clasp
firmly so it doesn't move.
You can also use this same adjustment
to correct slight deviations in the
direction of the bike. Open the lock, turn
the handlebar left or right looking for
the right one alignment, and retighten
the closing.
4Video: https://youtu.be/Kh6tNZ4Ac-8
Start up
Saddle adjustment
You can also adjust the height of the
saddle to perfectly adapt it to your
height. To adjust the hardness you must
tighten the thread according to your
tastes.
Check that it is not too loose or the
seatpost will move.
To modify the angle of the saddle, you
can use a number 13 wrench to decide
the inclination of the saddle. Remember
to tighten it well.
5Video: https://youtu.be/lNBEfWJ4lWI
Start up
Disc brake adjustment Tektro
CAUTION: The brakes on the Supra 3.0/3.0+
are fully adjusted at the factory and no
adjustment is necessary unless they loosen
with use.
To adjust the mechanical disc brake, we will
first loosen the mounting bolts, to allow
some movement for the caliper.
Then, you will have to act on the regulator of
the pad on the inside.
Finally, you must press the brake to take up
the slack in the cable and thus compress the
caliper on the disc to align it, without
releasing the brake cable.
6Video: https://youtu.be/zNEUnS3a_Uc
Start up
Uso de los cambios Nexus 3 / 7
Supra 3.0 and 3.0+ are equipped with Shimano
Nexus 3v and 7v derailleurs respectively (the Supra
3.0 lite is single speed), integrated into the rear
wheel hub. This system allows shifting when
stationary without the chain slipping or crossing.
The gears, in grip mode, will help you overcome any
obstacle. The Shimano Nexus 7 drivetrain offers a
range of 245%, which is 30% more than that of the
Nexus 3.
Supra 3.0: Supra 3.0+:
7Video: https://youtu.be/WqIKTUUACfM
Speed 1: for hills
Speed 2: for stationary starting
Speed 3: for normal driving
Speed 1: for hills
Speed 2: minor slopes
Speed 3: intermediate speed
Speed 4: for normal riding
Speed 5: intermediate speed
Speed 6: for downhills
Speed 7: for more favourable downhills
Start up
Tyre inflation
To check the amount of air in the tires,
remember that the Supra ECO has 3.5 bar of
pressure, so it is convenient to use an inflator
with a pressure gauge.
The Supra ECO is very comfortable, since you
can inflate the wheels in the semifolded
position, without the need to support it on
the wall or turn it over.
8Video: https://youtu.be/WqIKTUUACfM
Altri manuali per SUPRA 3.0
1
Indice
Altri manuali Flebi Bicicletta
