6. SAFETY RECOMMENDATIONS
The units have been designed and manufactured with application of solutions for
minimizing hazards to people and property. This does not eliminate all possible hazards,
though.
Therefore heating and cooling units should be used only in accordance with the
Instruction Manual
Commissioning, installation, connection, inspection and repair works on the units
should be performed by an authorised technician, and electrical works by a person
holding the required qualications.
All maintenance and repair works should be carried out with voltage off.
In the case of the unit failure immediately turn the motor electrical power supply off and
cut the heating medium supply off.
The unit can only work with properly operating electrical protection devices. It must be
uninterruptedly connected to the electrical installation tted with protection terminal
(earthing), residual-current device and service switch.
Use original spare parts only
Do not operate the unit, if the fan has no protective meshing on.
Important note!
Any installation or use of the heating and cooling unit not in accordance with the instruction
manual may cause the unit damage and voids the warranty.
Due to its design, the device does not emit any hazardous radiation.
Despite the fact that the device has been designed and manufactured in accordance with the
standards valid as for the moment of the manufacture start, likeliness of injury and damage to health
when using the device is unavoidable. This likeliness is related to frequency of using, cleaning and
repairing the device, presence of persons within the danger area, and not respecting the safety rules
as set out in the instruction.
Severity of the bodily injury and deterioration of health is dependent on numerous conditions which
can be foreseen partially only by considering them when designing the device and by providing
descriptions and warnings in the instruction manual.
Therefore residual risk is present if recommendations and instructions are not respected by the
operator.
