Viessmann Vitoligno 300-H Istruzioni operative
Operating instructions
for the system user
VIESMANN
Heating system with Ecotronic weather-compensated, digital boiler
and heating circuit control unit
VITOLIGNO 300-H
5549 811 GB 9/2014 Please keep safe.
2
Please follow these safety instructions closely to prevent accidents and mate-
rial losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note" con-
tain additional information.
Target group
These operating instructions are
designed for heating system users.
This appliance can also be operated by
children of 8 years and older, as well as
by individuals with reduced physical,
sensory or mental faculties or those lack-
ing in experience and knowledge, provi-
ded such individuals are being super-
vised or have been instructed in the safe
use of this appliance as well as in any
risks arising from it.
!Please note
Supervise children in the proxim-
ity of the appliance.
■ Never permit children to play
with the appliance.
■ Cleaning and maintenance
must not be carried out by
unsupervised children.
Appliance connection
■ The appliance may only be connected
and commissioned by authorised con-
tractors.
■ Only operate the appliance with suita-
ble fuels.
■ Observe the specified electrical con-
nection requirements.
■ Modifications to the existing installa-
tion may only be carried out by author-
ised contractors.
Danger
Incorrectly executed work on the
heating system can lead to life
threatening accidents.
Work on electrical equipment
must only be carried out by a
qualified electrician.
Work on the appliance
■ All settings and work on the appliance
must be carried out as specified in
these operating instructions.
Further work on the appliance may
only be carried out by authorised con-
tractors.
■ Never change or remove attachments
or fitted accessories.
■ Never open or retighten pipe connec-
tions.
Danger
Hot surfaces can cause burns.
Never touch the hot surfaces
inside the appliance or those of
uninsulated pipes, fittings or flue
pipes.
Safety instructions
For your safety
5549 811 GB
3
If you smell flue gas
Danger
Flue gas can lead to life threat-
ening poisoning.
■ Shut down the heating system.
■ Ventilate the installation site.
■ Close all doors in the living
space.
In case of fire
Danger
Fire presents a risk of burns and
explosion.
■ Shut down the heating system.
■ Use a tested fire extinguisher,
class ABC.
What to do if the heating system
develops a fault
Danger
Fault messages indicate faults in
the heating system. If faults are
not rectified, they can have life
threatening consequences.
Do not acknowledge fault mes-
sages several times in quick suc-
cession. Inform your heating con-
tractor so the cause can be ana-
lysed and the fault rectified.
Conditions for siting
Danger
Sealed vents result in a lack of
combustion air. This leads to
incomplete combustion and the
formation of life threatening car-
bon monoxide.
Never cover or close existing
vents.
Do not make any subsequent
modifications to the building
characteristics that could affect
safe operation (e.g. cable/pipe-
work routing, cladding or parti-
tions).
Danger
Easily flammable liquids and
materials (e.g. naphtha, solvents,
cleaning agents, paints or paper)
can cause deflagration and fire.
Never store or use such materials
in the installation room or in direct
proximity to the heating system.
!Please note
Incorrect ambient conditions can
lead to heating system damage
and can put safe operation at
risk.
■ Ensure ambient temperatures
are above 0 °C and below
35 °C.
■ Prevent air contamination by
halogenated hydrocarbons
(e.g. as contained in paints,
solvents or cleaning fluids) and
excessive dust (e.g. through
grinding/polishing work).
■ Avoid continuously high humid-
ity levels (e.g. through continu-
ous drying of washing).
Safety instructions
For your safety (cont.)
5549 811 GB
4
Extractors
The operation of appliances that extract
air to the outside (cooker hoods, extrac-
tors, air conditioning units, etc.) can cre-
ate vacuum pressure. If the boiler is
operated at the same time, this can lead
to reverse flow of the flue gas.
Danger
The simultaneous operation of
the boiler and appliances that
extract air to the outside can
result in life threatening poison-
ing due to reverse flow of the flue
gas.
Take suitable steps to ensure an
adequate supply of combustion
air. If necessary, contact your
heating contractor.
Auxiliary components, spare and
wearing parts
!Please note
Components not tested with the
heating system may damage the
system or affect its function.
Have all installation or replace-
ment work carried out exclusively
by qualified contractors.
Safety instructions
For your safety (cont.)
5549 811 GB
5
Introductory information
Intended use......................................................................................................... 8
Commissioning..................................................................................................... 8
Your system is preset at the factory..................................................................... 9
Terminology.......................................................................................................... 10
Energy saving tips................................................................................................ 10
Where to find the controls
Boiler controls and components........................................................................... 11
Controls and display elements of control unit....................................................... 12
Boiler operation
Heat-up preparations............................................................................................ 13
Action in case of overheating............................................................................... 13
■ Boiler water temperature has reached 95 °C.................................................... 14
Control unit operation
Navigation in the control unit menu...................................................................... 16
Menu structure of the control unit......................................................................... 18
Central heating
Required settings................................................................................................. 22
Selecting a heating circuit.................................................................................... 22
Setting the room temperature............................................................................... 23
Setting the operating program.............................................................................. 24
Setting a time program......................................................................................... 24
■ Setting switching times..................................................................................... 25
■ Deleting a time phase....................................................................................... 26
■ Resetting time phases to the factory settings................................................... 26
Changing the heating curve................................................................................. 26
Stopping central heating....................................................................................... 30
Comfort and energy saving functions
Selecting party mode............................................................................................ 31
Selecting economy mode..................................................................................... 32
Selecting the holiday program.............................................................................. 33
DHW heating
Required settings................................................................................................. 35
Setting the DHW temperature.............................................................................. 35
Setting the operating program.............................................................................. 35
Index
Index
5549 811 GB
6
Setting the time program...................................................................................... 36
■ Setting time phases.......................................................................................... 36
■ Deleting a time phase....................................................................................... 37
■ Resetting time phases to factory settings......................................................... 37
Stopping DHW heating......................................................................................... 38
Heating water buffer cylinder
Selecting the operating program.......................................................................... 39
Setting the time program...................................................................................... 40
■ Setting time phases.......................................................................................... 40
■ Deleting a time phase....................................................................................... 41
Setting the heating curve...................................................................................... 41
Fuel supply
Blocking times for automatic fuel supply.............................................................. 43
■ Setting blocking times....................................................................................... 43
■ Deleting blocking times..................................................................................... 44
Further adjustments
Setting the display contrast.................................................................................. 45
Setting the brightness of the display.................................................................... 45
Naming heating circuits........................................................................................ 45
Setting the time and date..................................................................................... 46
Language selection.............................................................................................. 47
Setting the temperature unit (°C/°F)..................................................................... 47
Changing boiler water temperature...................................................................... 47
Changing the set value of residual oxygen.......................................................... 48
Setting the minimum system temperature............................................................ 48
Restoring factory settings..................................................................................... 49
Scanning
Scanning fault messages..................................................................................... 50
Scanning information............................................................................................ 51
■ Scanning temperatures..................................................................................... 53
Shutting down the heating system for an extended period
Shutting down the heating system for an extended period.................................. 55
Shutdown............................................................................................................. 55
What to do if...
Rooms are too cold.............................................................................................. 56
Rooms are too hot................................................................................................ 57
There is no hot water............................................................................................ 58
Index
Index
5549 811 GB
7
The DHW is too hot.............................................................................................. 58
"Fault" is shown in the display.............................................................................. 58
Ordering fuel....................................................................................................... 59
Maintenance and cleaning
Care, inspection and maintenance....................................................................... 60
Replacing fuses.................................................................................................... 61
Cleaning information............................................................................................ 61
Maintenance intervals.......................................................................................... 61
Emptying the ash box........................................................................................... 62
Cleaning the light barriers.................................................................................... 63
Appendix
Terminology.......................................................................................................... 64
Efficient and clean operation................................................................................ 65
Dismantling and disposal..................................................................................... 66
■ Dismantling....................................................................................................... 66
■ Disposal............................................................................................................ 66
Energy saving tips............................................................................................. 67
Keyword index.................................................................................................... 68
Index
Index (cont.)
5549 811 GB
8
The appliance is only intended to be
installed and operated in sealed unven-
ted heating systems that comply with
EN 12828, with due attention paid to the
associated installation, service and
operating instructions. It is only designed
for the heating of heating water that is of
potable water quality.
Intended use presupposes that a fixed
installation in conjunction with permissi-
ble, system-specific components has
been carried out.
Commercial or industrial usage for a pur-
pose other than heating the building or
DHW shall be deemed inappropriate.
Any usage beyond this must be
approved by the manufacturer in each
individual case.
Incorrect usage or operation of the appli-
ance (e.g. the appliance being operated
for longer periods when open) is prohibi-
ted and will result in an exclusion of lia-
bility. Incorrect usage also occurs if the
components in the heating system are
modified from their intended use (e.g. if
the flue gas and ventilation air paths are
sealed) or if other fuels than those inten-
ded for this appliance are used.
Commissioning
The commissioning and matching up of
the control unit to local conditions and
the structural characteristics of the build-
ing must be carried out by your heating
contractor.
Service instructions
As the user of new combustion equip-
ment, you may be obliged to notify your
local flue gas inspector of the installation
[check local regulations]. Your local flue
gas inspector (where applicable) will
also provide you with information on
additional activities concerning your
combustion equipment (such as regular
testing, cleaning, etc.).
Prepare and carry out the emissions
tests according to 1st BImSchV:
Service instructions
Introductory information
Intended use
5549 811 GB
9
Your boiler's control unit is set at the fac-
tory.
■ The heating circuits are set to the
"Heating" operating program.
■ The domestic hot water heating is set
to the "DHW" operating program.
Your heating system is therefore ready
for operation:
Central heating
■ From 06:00 to 22:00 h your rooms are
heated to 22 °C "Set room temp"
(standard heating mode).
■ From 22:00 to 06:00 h your rooms are
heated with "Set red room temp"
(room temperature for reduced heat-
ing mode, night setback).
■ Your heating contractor can make fur-
ther settings for you during commis-
sioning.
You can change any settings at any
time to suit your individual require-
ments (see from page 22).
DHW heating
■ DHW is heated to 60 °C "Set DHW
temperature" every day from 00:00
to 24:00 h.
■ Your heating contractor can make fur-
ther settings for you during commis-
sioning.
You can change any settings at any
time to suit your individual require-
ments (see from page 35).
Frost protection
■ Your boiler, DHW cylinder and heating
water buffer cylinder are protected
against frost.
Wintertime/summertime changeover
■ This changeover is automatic.
Time and date
■ The day and time were set by your
heating contractor during commission-
ing.
Power failure
■ All data is retained if there is a power
failure.
Introductory information
Your system is preset at the factory
5549 811 GB
10
The appendix contains a chapter entitled
"Terminology" to provide you with a bet-
ter understanding of the functions of your
boiler.
Energy saving tips
Use the adjustment options offered by
your boiler control unit:
■ For central heating, select the operat-
ing program that meets your current
requirements:
– For short periods of absence (a few
hours e.g. shopping trips), select
"Economy mode" (see page 32).
As long as economy mode is activa-
ted, the room temperature is
reduced.
– If you are going away, select the
"Holiday program" (see
page 33).
The operating program for central
heating is automatically set to
"Standby mode" while the holiday
program is active.
– If, for an extended period, you do not
want to heat the rooms and you do
not require DHW, select the
"Standby mode" operating pro-
gram for the relevant heating circuits
and for DHW.
– See page 24 for the relevant
heating circuits
– See page 35 for DHW heating
■ Never set the DHW cylinder tempera-
ture excessively high (see page 35).
Contact your heating contractor for addi-
tional energy saving functions offered by
the control unit for your boiler.
For recommendations for energy saving,
see page 67.
Introductory information
Terminology
5549 811 GB
Altri manuali per Vitoligno 300-H
1
Indice
Altri manuali Viessmann Sistema di riscaldamento
Viessmann
Viessmann Vitocell 100-E Istruzioni operative
Viessmann
Viessmann VITOVENT 300 Manuale utente
Viessmann
Viessmann Vitocell 100-L Istruzioni operative
Viessmann
Viessmann Vitotronic 200 KW2 Manuale utente
Viessmann
Viessmann VITOVENT 300 Istruzioni operative
Viessmann
Viessmann VITOBLOC 200 Manuale elenco delle parti
Viessmann
Viessmann VITODENS Manuale utente
Viessmann
Viessmann VITODENS 200 WB2B Manuale utente
Viessmann
Viessmann VITOCELL 100-W Istruzioni operative
Viessmann
Viessmann Vitotronic 100 HC1 Guida
Viessmann
Viessmann NC-Box Istruzioni operative
Viessmann
Viessmann VITOCELL 100-W Istruzioni operative
Viessmann
Viessmann VITOSOL300 Manuale utente
Viessmann
Viessmann Vitovalor PA2 Istruzioni operative
Viessmann
Viessmann Vitodens 100-W Manuale utente
Viessmann
Viessmann Vitodens series Manuale utente
Viessmann
Viessmann Vitocell 100-H Istruzioni operative
Viessmann
Viessmann VITOCELL 300B Istruzioni operative
Viessmann
Viessmann Vitodens 100-W Manuale utente
Viessmann
Viessmann Vitocell 100-H Guida rapida
