Viessmann VITOSOL300 Manuale utente
VIESMANN
Installation instructions
for heating engineers
Vitosol 300
Type SP3
Vacuum tube collector based on the heat pipe principle
VITOSOL 300
5862 790 GB 5/2005 Dispose after installation.
Please follow these safety instructions closely to prevent accidents and
material losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!Please note
This symbol warns against the
risk of material losses and
environmental pollution.
Note
Details identified by the word "Note"
contain additional information.
Target group
These instructions are exclusively
designed for qualified personnel.
&Work on gas appliances must only
be carried out by a qualified gas
engineer.
&Work on electrical equipment must
only be carried out by a qualified
electrician.
Regulations
Observe the following when working
on this system
&all legal instructions regarding the
prevention of accidents,
&all legal instructions regarding
environmental protection,
&theCodeofPracticeofrelevant
trade associations,
&all current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards.
Workingontheheatingsystem
&Isolate the system from the power
supply and check that it is no longer
'live', e.g. by removing a separate
fuse or by means of a mains isola-
tor.
&Safeguard the system against
unauthorised reconnection.
&When using gas as fuel, also close
the main gas shut-off valve and
safeguard against unauthorised
reopening.
Safety instructions
2
5862 790 GB
Preparing the installation
Earthing and lightning protection of the solar heating system....................... 4
Installation steps
Vertical roof top installation......................................................................... 5
&Component summary............................................................................... 5
&Fitting roof hooks or mounting brackets .................................................... 7
&Fitting the mounting rails.......................................................................... 13
&Fitting the connecting chamber ................................................................ 16
Installation on flat roofs............................................................................... 17
&Component summary............................................................................... 17
&Determining the collector row distance "z"................................................ 18
&Fitting the support frame .......................................................................... 19
&Fitting the mounting rails and connecting chamber ................................... 24
Water connections ...................................................................................... 25
&Installing the connecting chamber ............................................................ 25
&Fitting the connection set ......................................................................... 26
&Fitting the vacuum tubes and collector temperature sensor....................... 28
Installation.................................................................................................. 31
Commissioning and adjustment .................................................................. 32
Index
3
5862 790 GB
Install an electrical conductor on the
pipework system of the solar circuit in
the lower part of the building in com-
pliance with VDE or local regulations.
The connection of the collector sys-
tem to a new or existing lightning pro-
tection system or the provision of
local earthing must only be carried out
by authorised trained personnel, who
must take into account the conditions
applicable on site.
Earthing and lightning protection of the solar heating system
4
5862 790 GB
Component summary
Vertical roof top installation
5
5862 790 GB
Roof tile cover
1Timber
&38 x 58 x 2430 mm
&30 x 100 x 2430 mm
2Roof hooks
3Zinc-plated countersunk chip-
board screw (Spax-s) 6 x 80 mm
4Zinc-plated countersunk chip-
board screw (Spax-s) 5 x 30 mm
Slate cover
5Roof hooks
6Zinc-plated countersunk chip-
board screw (Spax-s) 6 x 30 mm
Corrugated sheet cover
7Roof hooks for corrugated roofing
sheet profile 5 and 6
8Roof hooks for corrugated roofing
sheet profile 8
Plain tile cover
9Roof hooks
4Zinc-plated countersunk chip-
board screw (Spax-s) 5 x 30 mm
Fixing kit without roof hooks
qP Mounting bracket
For all forms of roofing
qQ Clamping bracket
qW T-slot bolt
qE Washer
qR Hexagon nut
qT Mounting rail
qZ Mounting rail with tube holders
qU Retaining plate
qI Connecting chamber
qO Vacuum tube
wP Retaining rubber
Accessories for one collector array
wQ Connecting pipe
wW Thermal insulation
Connection set:
wE Connecting pipe (short)
wR Connecting pipe (long)
wT Locking ring fitting (elbow 90°),
722
wZ Support sleeve
wU U-pipe
wI Thermal insulation cap
wO Fixing screws
eP Strain relief fitting
Vertical roof top installation (cont.)
6
5862 790 GB
Fitting roof hooks or mounting brackets
Overview —Installation with roof hooks
Dimension x according to the width of
thetilehead.
AVacuum tube
BClamping bolt
CMounting rail with tube holders
DMounting rail
ERoof hooks
FTimber, 38 x 58 mm
(only for roof tiles)
GTimber, 30 x 100 mm
(only for roof tiles)
HRetaining plate
KConnecting chamber
Vertical roof top installation (cont.)
7
5862 790 GB
Overview —Installation with mounting brackets
(e.g. on sheet steel roofs)
AVacuum tube
BClamping bolt
CMounting rail with tube holders
DMounting bracket
EMounting rail
FRetaining plate
GConnecting chamber
Vertical roof top installation (cont.)
8
5862 790 GB
Secure the mounting brackets to the
substructure in accordance with the
dimensions given in the illustrations
on page 8 and 10.
Vertical roof top installation (cont.)
9
5862 790 GB
For installations without roof hooks, mounting brackets are used in place of the
roof hooks.
Centre the mounting rails, maintaining dimension f = 81 mm.
Combination
(tubes)
ammbmmcmmdmmemm
20 850 ——— —
30 1260 ——— —
20/20 850 1520 850 2370 670
20/30 850187512602930 820
30/30 1260 2230 1260 3490 970
Vertical roof top installation (cont.)
10
5862 790 GB
Indice
Altri manuali Viessmann Sistema di riscaldamento
Viessmann
Viessmann Vitotronic 100 HC1 Guida
Viessmann
Viessmann VITODENS Manuale utente
Viessmann
Viessmann Vitovalor PA2 Istruzioni operative
Viessmann
Viessmann VITOTRONIC 100 Manuale utente
Viessmann
Viessmann VITODENS Manuale utente
Viessmann
Viessmann Vitocell 100-H Guida rapida
Viessmann
Viessmann AC-Box Istruzioni operative
Viessmann
Viessmann VITOVENT 300 Manuale utente
Viessmann
Viessmann VITODENS Manuale utente
Viessmann
Viessmann Vitodens 100-W Manuale utente
Viessmann
Viessmann Vitodens series Manuale utente
Viessmann
Viessmann VITOTRONIC 200 Manuale utente
Viessmann
Viessmann VITODENS Manuale utente
Viessmann
Viessmann Vitodens 100-W Manuale utente
Viessmann
Viessmann NC-Box Istruzioni operative
Viessmann
Viessmann VITOSOL 200-T SD2A 2m2 Series Manuale utente
Viessmann
Viessmann VITOVENT 300 Istruzioni operative
Viessmann
Viessmann VITOCELL 100-W Istruzioni operative
Viessmann
Viessmann Vitodens 100-W Manuale utente
Viessmann
Viessmann VITOVENT 300 Manuale utente
