Flexitron Webdyn WebdynEasy W M-Bus Manuale utente

WebdynEasy W M-Bus 868MHz

User Manual

www.webdyn.com

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

2.4.3 Cellular Network ........................................................................................................ 22

2.4.4 Indicators & Buttons .................................................................................................. 23

2.4.5 USB Interface.............................................................................................................. 25

2.4.6 Bluetooth Interface (BLE)........................................................................................... 26

3. Product Operation................................................................................................................................. 27

3.1 Starting the Product................................................................................................................. 27

3.1.1 Operating Mode .......................................................................................................... 27

3.1.2 Application Operation................................................................................................. 32

4. Conguration......................................................................................................................................... 33

4.1 Local Conguration .................................................................................................................. 33

4.1.1 USB .............................................................................................................................. 33

4.1.2 Bluetooth (BLE)........................................................................................................... 33

4.2 Conguration File ..................................................................................................................... 35

4.2.1 System......................................................................................................................... 35

4.2.2 W M-Bus radio ............................................................................................................ 39

4.2.3 Hub Connectivity......................................................................................................... 42

4.2.4 Alarms ......................................................................................................................... 47

4.2.5 Schedule and Monitoring........................................................................................... 48

5. Operation............................................................................................................................................... 53

5.1 The Remote Server................................................................................................................... 53

5.1.1 The FTP Server............................................................................................................ 53

5.2 The Conguration..................................................................................................................... 56

5.3 The Data ................................................................................................................................... 58

5.4 Alarms....................................................................................................................................... 60

5.5 ACK Acknowledgements.......................................................................................................... 61

5.6 Commands ............................................................................................................................... 63

5.6.1 “Request” Command.................................................................................................. 64

5.6.2 “Factory” Command................................................................................................... 65

5.6.3 “Update” Command ................................................................................................... 65

5.6.4 “Status” Command .................................................................................................... 65

5.6.5 “Diag” Command........................................................................................................ 66

5.6.6 “CongGet” Command............................................................................................... 66

Index

1. Glossary................................................................................................................................................. 5

2. About this Document............................................................................................................................ 7

2.1 Scope ........................................................................................................................................ 7

2.2 Target Audience........................................................................................................................ 7

2.3 Product Versions ...................................................................................................................... 7

User Manual ..................................................................................................................... 8

1. Presentation.......................................................................................................................................... 8

1.1 General Description ................................................................................................................. 8

1.2 Operating Principle................................................................................................................... 8

1.3 Interfaces.................................................................................................................................. 9

1.4 Supported Equipment.............................................................................................................. 10

1.5 Product and Accessory References ........................................................................................ 10

1.6 Technical Specications .......................................................................................................... 10

1.6.1 General Specications ............................................................................................... 10

1.6.2 Technical Specications............................................................................................. 11

1.6.3 Software Specications ............................................................................................. 14

1.6.4 Battery Life.................................................................................................................. 14

1.7 Safety Instructions ................................................................................................................... 15

1.8 Regulations............................................................................................................................... 16

2. Installation ............................................................................................................................................ 17

2.1 Prerequisite ............................................................................................................................. 17

2.2 Unpacking................................................................................................................................. 17

2.2.1 Contents...................................................................................................................... 17

2.2.2 Identication ............................................................................................................... 17

2.3 Assembly................................................................................................................................... 19

2.3.1 Opening/Closing the Box ........................................................................................... 19

2.3.2 Wall Mounting............................................................................................................. 19

2.4 Interface Description ............................................................................................................... 19

2.4.1 Product Power Supply................................................................................................. 19

2.4.2 Radio ........................................................................................................................... 21

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

5.6.7 “whiteListErase” Command....................................................................................... 67

5.6.8 “operatorInit” Command............................................................................................ 67

5.6.9 “logGet” Command .................................................................................................... 68

5.6.10 “logClean” Command............................................................................................... 68

5.6.11 “supervisionClean” Command ................................................................................ 69

5.7 Supervision............................................................................................................................... 69

5.8 The Log ..................................................................................................................................... 74

6. Update ................................................................................................................................................... 77

6.1 Local.......................................................................................................................................... 78

6.2 Remote...................................................................................................................................... 78

7. Tools & Diagnostics............................................................................................................................... 79

8. FAQ......................................................................................................................................................... 79

9. Appendix................................................................................................................................................ 80

9.1 Conguration - Variable list...................................................................................................... 80

Ofces & Support Contact............................................................................................... 83

1. Glossary

NAME DESCRIPTION

APN Access Point Name: the name of the access point the gateway uses to connect to

the Internet via a mobile connection.

AES Advanced Encryption Standard: synthetic encryption algorithm.

BLE Bluetooth Low Energy: wireless transmission technique in the form of a Bluetooth-

based open standard, characteristically having much lower power consumption.

Base64 Encoded data using an alphabet with 64 characters.

BSON Binary JSON: binary version of JSON: encoding used to reduce the size of

transmitted data to save stand-alone system batteries.

FTP File Transfer Protocol: communication protocol used to exchange les over a TCP/

IP network.

FTPS File Transfer Protocol Secure: communication protocol intended for the computer

exchange of les on a TCP / IP network, variant of FTP, secured with SSL or TLS

protocols. It allows visitors to verify the identity of the server they are accessing

using an authentication certicate. It also makes it possible to encrypt the

communication.

2G Second generation: second generation digital standard (2G) for mobile telephony

including GSM, GPRS and EDGE.

HTTP HyperText Transfer Protocol: client-server communication protocol developed for

the Web.

IP Internet Protocol: message protocol in charge of addressing and sending TCP

packets over the network.

JSON JavaScript Object Notation: JSON is an easily interpretable data exchange format.

LTE-M/

CAT-M1

Long Term Evolution – Machine: 4G mobile network specic to connected objects,

i.e. low consumption and long range.

NTP Network Time Protocol: an NTP server makes it possible to time synchronise

equipment.

IS Information System: server with which the hub exchanges (conguration, data,

alarms, etc.).

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

TCP Transmission Control Protocol: an Internet-based connection-oriented protocol

that provides data packet segmenting services that the IP protocol sends over the

network. This protocol provides a reliable data transfer service. See also IP.

TCP/IP Transmission Control Protocol/Internet Protocol: a set of network protocols

that provide interconnection services between computers of different

hardware architectures and operating systems. TCP/IP includes standards for

communication between computers and conventions for network interconnection

and routing.

W M-BUS Wireless M-Bus: evolution of the European Mbus standard in a radio frequency

adaptation. This connectivity is specic to metering applications such as: water,

gas and electricity meters.

2. About this Document

This guide describes all features of the WebdynEasy W M-Bus product.

Its purpose is to help operators install and congure their WebdynEasy W M-Bus and to allow operating

entities to include the collected data in their IS.

This manual is split into six separate sections:

• Section 1: General presentation

• Section 2: Installation

• Section 3: Conguration

• Section 4: Operation

• Section 5: Tools & diagnostics

• Section 6: FAQ

2.1 Scope

This technical description is valid for WebdynEasy W M-Bus hubs from hardware version V1 and software

version V1.0 onwards.

2.2 Target Audience

This guide is for on-site installers who will cable and congure the installations, for those in charge of

local or remote maintenance of the installations, and for developers of portals to use the sent data.

2.3 Product Versions

VERSION CONTENT

V1.0 Creation.

V1.1 Modication of the functioning of the product regards the magnet and the

number of bips. Adding of a scheme concerning le management.

V1.2 Addition and Modication on the supervision part. Adding autonomy.

V1.3 Additions in the glossary, modication of the command le.

V1.4 Additions on Field L for B format frames.

V1.5 Details on the data parameter F and on the diagnostic mode, adjustment of

the/scheduleRadio/data range.

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

User Manual

1. Presentation

1.1 General Description

The purpose of the WebdynEasy W M-Bus hub is to collect data from Wireless M-Bus sensors such as

meters (water, gas and electricity) and sensors (temperature, humidity, etc...). This technology is energy-

efcient, the hub battery service life can exceed 10 years.

Data collection is by radio on the 868MHz frequency. This frequency is free of charge and its use is

harmonised in many EU countries.

The collected information (data, parameters, alarms, ...) is formatted to BSON format before being sent

to an information system (IS) by modem.

1.2 Operating Principle

WebdynEasy W M-Bus allows you to build your private network and is part of a package. WM-Bus

communication is point-to-point in a non-operated way. The meters or sensors regularly send data

frames, which are received and the raw data (encrypted or transparent) contained in these frames are

stored by the WM-Bus hub. WebdynEasy W M-Bus will regularly send a le in BSON format containing the

whole raw data of the different sensors to a server via FTP using its 2G/LTE-M or modem. It is possible to

secure the exchanged les between the WebdynEasy W M-Bus and the FTP server by activating the AES

encryption (see chapter 4.2.1.2 : “security”).

WebdynEasy W M-Bus can be congured by connecting it to a computer via USB or by BLE using a

smartphone app.

NB, LTE-M, 2G

cellular network

Other W M-Bus

equipment

WebdynEasy W M-Bus

868MHz

Water and

electricity meters

Server User

Wireless M-Bus

888888

1.3 Interfaces

1. HALL effect sensor

2. Buzzer

3. Mini-USB connector

4. Indicators:

• LED 1: reserved

• LED 2: reserved

• LED 5: Modem status

5. 868MHz radio SMA antenna

6. Box output for the 868MHz radio external antenna (optional)

7. Battery Pack

8. Battery pack connector

9. Aerator

10. Box output for external power supply (optional)

11. Terminal block for external 12 V power supply

12. Box output for the 2G/LTE-M modem external antenna (optional)

13. 2G/LTE-M Modem SMA Antenna

14. Reset button

15. SIM card holder

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

1.4 Supported Equipment

The hub supports all equipment compliant with the 868MHz Wireless M-Bus standard and using one of

the following modes: T1, S1 and T1+C1.

1.5 Product and Accessory References

Product:

REFERENCES DESCRIPTIONS

WG0612-A12 WebdynEasy W M-Bus

Accessories:

REFERENCES DESCRIPTIONS

AC0803-01 Battery pack 7.2V / 14Ah

Webdyn proposes factory preconguration services for your WebdynEasy W M-Bus. Please contact our

sales department for further information.

1.6 Technical Specications

1.6.1 General Specications

REFERENCES DESCRIPTIONS

Power supply +12V 1A

Battery 7.2V 14Ah lithium battery pack (non-rechargeable) - in optimal conguration,

the battery can last up to 10 years

Consumption P: 2 W

Pmax: 5 W

Dimensions 160 x 150 x 55 mm

Box ASA

Protected against dust and bad weather

Weight 0.600 kg with battery pack

0.450 kg without battery pack

Operating

temperature -20ºC/+55ºC

Storage

temperature

-20ºC/+70ºC (without battery)

-20ºC/+25ºC (with battery)

Humidity 25% - 75%

Pollution rating 2

Certication RED

ROHS

REACH

Regulation

CE marking created in the framework of European technical

harmonisation legislation. It is mandatory for all products covered by one or

more European regulatory texts (directives or regulations).

Symbol indicating that the waste must be collected via a specic

channel and must not be disposed of as household waste.

Symbol indicating that the product must be recycled.

1.6.2 Technical Specications

REFERENCES DESCRIPTIONS

Memory capacity for data • Flash: 1.5MB (circular operation)

• 2000 frames per listening window

Radio interference Frequency: 868 MHz

Antenna: Internal SMA (external as an option)

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

Cellular Interface Modem GSM/GPRS/EDGE/LTE-M modem

• 2G (GSM, GPRS): 850/900/1800/1900 MHz

• LTE-M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/

B25/B26/B27/B28/B66/B85

Antenna: Internal SMA (external as an option)

BLE interface 160 x 150 x 55 mm

SIM format ASA

Protected against dust and bad weather

Webdyn does not supply any SIM cards. Please contact an M2M operator that supports the 2G

and LTE-M network.

Connectivity data:

RF BAND EMISSION FREQUENCIES MAX. POWER

2G GSM 900 880 MHz – 915 MHz

33 dBm (class 4)

2G GSM 850 824 MHz – 849 MHz

2G DCS 1800 1710 MHz – 1785 MHz

30 dBm (class 1)

2G PCS 1900 1850 MHz – 1910 MHz

LTE-M - Band 1 1920 MHz – 1980 MHz

21 dBm (class 5)

LTE-M - Band 2 1850 MHz – 1910 MHz

LTE-M - Band 3 1710 MHz – 1785 MHz

LTE-M - Band 4 1710 MHz – 1755 MHz

LTE-M - Band 5 824 MHz – 849 MHz

LTE-M - Band 8 880 MHz – 915 MHz

LTE-M - Band 12 699 MHz – 716 MHz

LTE-M - Band 13 777 MHz – 787 MHz

LTE-M - Band 18 815 MHz – 830 MHz

LTE-M - Band 19 830 MHz – 845 MHz

LTE-M - Band 20 832 MHz – 862 MHz

LTE-M - Band 25 1850 MHz – 1915 MHz

LTE-M - Band 26 814 MHz -849 MHz

LTE-M - Band 27 807 MHz – 824 MHz

LTE-M - Band 28 703 MHz – 748 MHz

LTE-M - Band 66 1710 MHz – 1780 MHz

LTE-M - Band 85 698 MHz – 716 MHz

BLE 2402 MHz – 2480 MHz 0 dBm

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

contact@webdyn.com | webdyn.com

V1.0 subject to changes | Webdyn © by Flexitron Group

1.6.3 Software Specications

SPECIFICATIONS DESCRIPTIONS

Wireless M-Bus T1, S1 and T1+C1 mode

BSON Specication 1.1

1.6.4 Battery Life

Battery life may vary depending on product use and environmental conditions.

The tables below are estimates taking into account:

• Standard environmental conditions.

• 1 radio listening window per day.

• 20KB of data recorded per listening window (ie 300 frames of 64 bytes or 500 frames of 40

bytes).

With LTE-M:

LENGTH OF LISTENING

WINDOW IN MINUTES 2 UPLOADS/DAY 1 UPLOAD/DAY 1 UPLOAD/WEEK

2 > 15 years > 15 years > 15 years

4 13 years > 15 years > 15 years

5 12 years 14 years > 15 years

6 11 years 13 years 13 years

8 9 years 10 years 11 years

10 8 years 9 years 9 years

12 7 years 7 years 8 years

15 6 years 6 years 6 years

20 5 years 5 years 5 years

30 3 years 3 years 3 years

With 2G:

LENGTH OF LISTENING

WINDOW IN MINUTES 2 UPLOADS/DAY 1 UPLOAD/DAY 1 UPLOAD/WEEK

2 > 15 years > 15 years > 15 years

4 12 years > 15 years > 15 years

5 11 years 13 years 14 years

6 10 years 12 years 12 years

8 8 years 10 years 10 years

10 7 years 8 years 8 years

12 6 years 7 years 8 years

15 5 years 6 years 6 years

20 4 years 5 years 5 years

30 3 years 3 years 3 years

1.7 Safety Instructions

Follow all the safety instructions in this guide.

Failure to follow these instructions can damage equipment and endanger people.

Electric connection:

• All wiring work must be carried out by a specialised qualied electrician.

• Please follow all the safety instructions featured in the equipment documentation.

The WebdynEasy W M-Bus product can be damaged by electrostatic discharges (ESD). When the

equipment is open, do not carry out any operations other than those described in this manual. Avoid any

contact with the components.

Class 3 equipment: the device operates on safety extra-low voltage (SELV) (50V maximum). The

voltage reduction must be obtained using a safety transformer providing safe galvanic isolation between

primary and secondary.

contact@webdyn.com | webdyn.com

Do not install the equipment near a heat source or at a height greater than 2m.

To clean the product, only use a slightly damp cloth to gently clean and wipe the surfaces. Never

use aggressive chemical agents or solvents that could alter the plastic material or corrode the metal

parts.

Never insert a battery other than the one recommended by Webdyn. Never recharge the battery.

To optimise radio and cellular modem reception sensitivity, it is imperative to leave 20 cm free

space around the antennas.

1.8 Regulations

The product complies with the European directives according to the EU Declaration of Conformity available

from Webdyn or on website: www.webdyn.com

Recycling:

The European directives enacted into national law covering battery waste and electric and

electronic equipment provide the framework for the actions needed to limit the negative impact of the

product’s end of life.

These products are collected separately. Use an authorised battery collection and processing centre or

contact Webdyn.

2. Installation

2.1 Prerequisite

Since the role of the hub is to send the data it collects to an IS, the installation requires sufcient

knowledge of the hub, but also of the information system to which it sends its data.

The following is required to ensure proper installation:

• To have this user manual to hand.

• To have a screwdriver suitable for the types of connectors and screws available on the

WebdynEasy W M-Bus hub.

• To have knowledge of the parameters to connect to the IS information system.

• To have a SIM card with an activated data subscription and knowledge of the provider’s APN.

• To have a magnet.

It is also strongly recommended to have the elements described below for any intervention on site and

to install the product.

• Use a remote antenna if radio or cellular modem reception is deteriorated.

• Have an Android smartphone with the WebdynEasy W M-Bus app installed to facilitate product

conguration.

• Have a PC for product conguration or update via USB.

2.2 Unpacking

2.2.1 Contents

The WebdynEasy W M-Bus hub comes standard with:

• A curved SMA antenna for the modem (internal).

• A curved SMA antenna for the radio (internal).

• A battery pack.

2.2.2 Identication

The commercial reference differs depending on whether or not the hub includes a customer conguration.

The commercial reference is composed as follows:

• Without conguration: the commercial reference is WG0612-A12.

• With conguration: the commercial reference is WG0612-A12 to which the customer identier

is added. For example, the following reference can be obtained: WG0612-A12-WG.

A unique identier called UID is assigned to each WebdynEasy W M-Bus. It is used to congure the

product and recognise it when you have several WebdynEasy W M-Bus products.

contact@webdyn.com | webdyn.com

The QR Code is used by the mobile app for synchronisation with the hub.

Each product is labelled with the following information:

This label is accessible on the underside of the product:

2.3 Assembly

2.3.1 Opening/Closing the Box

Follow these steps to open the hub box:

If the box is wall-mounted:

• Open the 2 doors on the front panel.

• Unscrew the 4 wall mounting screws in the recesses under the doors.

Then follow these steps:

• Unscrew the 4 screws behind the box.

• Remove the cover.

Follow these steps to close the hub box:

• Place the cover on the box base, make sure the seal is properly tted.

• Screw in the 4 screws on the back of the box.

2.3.2 Wall Mounting

The WebdynEasy W M-Bus can be wall-mounted. Before wall-mounting, rst close the box (see section

2.3.1: “Opening/closing the box”).

Screws and anchors are not included in the kit. You must choose the correct type of screw for the

type of wall you are xing the hub to (screw with a diameter of 4mm and a length of 25mm minimum).

Follow the steps below to x the hub to a wall:

• Open the 2 doors on the front panel.

• Screw the 4 wall mounting screws into the recesses under the doors.

• Close both doors on the front.

2.4 Interface Description

2.4.1 Product Power Supply

External Power Supply

The WebdynEasy W M-Bus hub can be powered using 12V DC with or without a battery pack connected.

Power is supplied from terminal block J8 on the left side of the battery pack.

Indice

Altri manuali Flexitron Portale

Flexitron

Flexitron WebdynPulse WG0510-A01 Manuale utente

Flexitron

Flexitron Webdyn WebdynEasy LoRaWAN Manuale utente

Flexitron

Flexitron Webdyn ExpertLoRaWAN Manuale di installazione

Flexitron

Flexitron WebdynEasy W M-Bus Manuale utente

Manuali Portale popolari di altre marche

LST

LST M500RFE-AS Manuale utente

Kinnex

Kinnex Media Gateway Manuale utente

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuale utente

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuale utente

Telsey

Telsey CPVA 500 - SIP Manuale utente

RTA

RTA 460A-NNA4 Scheda tecnica

Shaw

Shaw Gateway HDPVR Manuale utente

ABB

ABB VSN900 Guida rapida

Commander

Commander Pulse Manuale utente

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuale utente

NETGEAR

NETGEAR C6300BD Manuale utente

Amit

Amit CDW531AM Manuale utente

HMS

HMS Netbiter EasyConnect EC150 Manuale utente

Huawei

Huawei EchoLife HG620 Manuale utente

AT&T

AT&T U-verse 3801 Manuale per l'uso e la cura

Logic IO

Logic IO RTCU MX2 turbo Manuale utente

Suttle

Suttle MediaMAX MXM-521 Manuale utente