FLOS F6430009 Manuale utente

REV. 1

DATE 15/11/2021

SKYGARDEN RECESSED

F6430009

Flos reserves the right to introduce any changes to its own models, without prior notice.

SKYGARDEN RECESSED

F6430009

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

01. RF6432000

–Electrical assembly

03. RF6430001

–Rcs diffuser assembly

RF6432000

ELECTRICAL ASSEMBLY

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

SKYGARDEN RECESSED

F6430009

REV. 1

DATE 15/11/2021

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

RF6432000

ELECTRICAL ASSEMBLY

SKYGARDEN RECESSED

F6430009

Unfasten the glass diffuser (A) from the lamp

body.(Fig.1-2)

Remove the lamp bulb (B) and unfasten the two

locking screws (C).(Fig.3)

Fig.1

Fig.3

Fig.2

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

RF6432000

ELECTRICAL ASSEMBLY

SKYGARDEN RECESSED

F6430009

Slide out the damaged electrical assembly (D) from

the lamp body.

Fig.4

Fig.5

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

RF6432000

ELECTRICAL ASSEMBLY

SKYGARDEN RECESSED

F6430009

Unfasten the locking screw (E) of the cable clamp

and of electrical assembly cover flap (F).(Fig.5-6)

Lift-up the cover and disconnect the feed connector

(G) from the damaged

electrical assembly.(Fig.8)

Fig.6

Fig.8

Fig.7

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

RF6432000

ELECTRICAL ASSEMBLY

SKYGARDEN RECESSED

F6430009

Fig.9

If perhaps you decide to connect replace the

feed connector, please carry-out the following

procedure:

•Strip-off 9 mm of isolation from the wires

(max 2 mm2). Remark! Do not twist the

copper wires.

•Insert a flat thin screw driver inside the cage

clamping connect or openings (1), insert the

wire (2) and then remove the screw driver (3).

Automatically the wires will lock inside the

connector.

In case you need to remove the wires, please

carry-out the procedure in the

opposite way.

Assemble now the new spare-part:

Connect the connector (G) to the new electrical

assembly.(Fig.8 page 6)

Close the flap cover (F) and tighten the screw

(E).(Fig.6-7 page 8)

Insert the electrical assembly (D) into the lamp

body, ensuring to insert the back

part first and then turn until it is completely

inserted.(Fig.4-5 page 5)

Fix the electrical assembly to the lamp body by

fastening the screws (C). Install the lamp-bulb

(B).(Fig.2-3 page 4)

Screw on the diffuser (A) by keeping it

perpendicular to the threaded screw (B).

REMARK!!! Screw on the diffuser without forcing.

Once reaching the end of the

thread loosen slightly to make it easy for a

future removal.(Fig.1 page 4)

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

RF6430001

GLASS DIFFUSER ASSEMBLY

SKYGARDEN RECESSED

F6430009

WARNING! When installing and whenever acting on the appliance, ensure that the power supply has been switched off.

For the installation of the spare-part, it is necessary to consult a qualified electrician.

Flos reserves the right to introduce any changes to its own models, without prior notice.

REV. 1

DATE 15/11/2021

SKYGARDEN RECESSED

F6430009

Install the lamp-bulb then assemble the diffuser (A)

on the body by fastening it onto the appropriate

threaded screw (B).

REMARK!!! Screw on the diffuser without forcing.

Once reaching the end of

the thread loosen slightly to make it easy for a

future removal.

Fig.4

Fig.5

RF6430001

GLASS DIFFUSER ASSEMBLY

Altri manuali FLOS Illuminazione domestica

Manuali Illuminazione domestica popolari di altre marche

JONATHAN Y

JONATHAN Y JYL5019A Manuale utente

JONATHAN Y

JONATHAN Y JYL6007A Manuale utente

Philips

Philips Ledino 31606/11/16 Manuale utente

Salus

Salus UG600 Manuale utente

Safavieh Lighting

Safavieh Lighting CANDRI TBL4427A Manuale utente

Hunter

Hunter Bullet Spotlight Kit Manuale di istruzioni

Philips

Philips Ledino 16811/87/16 Manuale utente

Philips

Philips 405441213 Manuale utente

Philips

Philips Halogen Light Manuale utente

Pentair

Pentair GLOBRITE Manuale utente

Philips

Philips 55592-30-16 Manuale utente

Livoo

Livoo Night light Manuale utente

Schwaiger

Schwaiger NFL45 Manuale utente

FRITZ HANSEN

FRITZ HANSEN AQ01 PLUG-IN Manuale utente

MOOD

MOOD CORSIN JY-16 Manuale utente

Safavieh Lighting

Safavieh Lighting KREMP TBL4409A Manuale utente

JONATHAN Y

JONATHAN Y JYL8019 Manuale utente

XTRASUN

XTRASUN XTDEOKT1 Manuale utente