Flow MACH 300 Manuale utente
MACH 300 SYSTEM MANUAL
Includes Ancillary Options
M-810 | REV. C | en | APRIL 2021
About this content
Due to continuing product improvement, the inform tion cont ined in this document is subject to ch nge
without notice. Flow Intern tion l Corpor tion sh ll not be held li ble for technic l or editori l omissions
m de herein, nor for ny incident l or consequenti l d m ge resulting from the use of this m teri l.
Registered trademarks
In the United St tes, Dyn mic W terjet®, FlowCUT®, FlowM ster®, FlowNEST®, FlowPATH®,
FlowXpert®, HyperJet®, HyPlex®, P ser®, nd XD® re registered tr dem rks of Flow Intern tion l
Corpor tion.
Windows is either registered tr dem rk or tr dem rk of Microsoft Corpor tion in the United St tes
nd/or other countries.
All other registered tr dem rks shown re the property of their registered owners.
Copyright
This content cont ins inform tion protected by copyright. No p rt of this document sh ll be reproduced
in ny m nner without prior written consent from Flow Intern tion l Corpor tion.
© 2021 Flow Intern tion l Corpor tion. All rights reserved. ORIGINAL INSTRUCTIONS.
Other notes
◦ If you see reference to the number of "p ges" included in section, it is referring to the number of
rticles in th t section. It is not physic l p ge count. Simil rly, footnotes re t the end of n
rticle, not lw ys t the end of physic l p ge.
◦ Im ges shown re for gener l reference only nd m y v ry from ctu l product.
Symbols used in content
Disc rd p rt
Keep this p rt; you will inst ll it l ter in the procedure.
© 2021 Flow Intern tion l Corp.
Retrieved from Flow KB on April 12, 2021 PST
Service and Support
We've committed ourselves to the success of our customers for over 40 years. As a result, nearly 1 out
of every 3 systems built is delivered to repeat customers. We are proud to provide the largest and most
highly trained support team, with the experience to ensure your success.
United States & Canada
23500 64th Avenue South · Kent, Washington 98032 · USA
Tel: 1.800.526.4810
Central America, South America, Mexico & Caribbean
Tel: +54 9 11 4700 8881 or 8882
Europe, Middle East & Africa
Gutenbergstrasse 10 · D64331 Weiterstadt · Germany
Tel: +49 6151 3095-0
Taiwan, China, Korea, Southeast Asia, Australia & New Zealand
Tel: +86-21-5438-2222
Japan
Tel: +81-52-701-7021
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Important! Read carefully before use. Keep for future reference.
Safety
Pages: 13
•How we show safety messages in content
How we show safety messages in content.
•Intended use statement
Review of what the intended use is, who the intended user is for systems—including
ancillary options—and modifications.
•Emergency medical information
Vital information to be given to medical personnel in case of emergency.
•Lockout/Tagout (LOTO)
Supplemental instructions to your facility Lockout/Tagout procedures. Includes instructions
for systems and CF900 hopper.
•Personal Protective Equipment (PPE)
Recommendations for PPE.
•Electrical safety
Includes instructions for the electrician.
•Exceptional or emergency situations
What to do if you come across these exceptional or emergency situations.
•Safety during cleaning
Safety precautions to follow during cleaning.
•Safety during maintenance
Follow these safety precautions while doing maintenance.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
•Safety during operation
Safety precautions to follow during operation.
•Safety for transport
Recommendations to follow if you have to transport the machine.
•Transporting the CF900 hopper
Recommendations for how-to transport the hopper.
•Safety labels
Includes information on safety labels and diagrams.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
How we show safety messages in content
In our content, safety messages are highlighted with the safety alert symbol and a signal word, only a
signal word, or only a signal word panel. Pay attention to these safety messages—they alert you to
hazardous situations!
Safety alert symbol
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury or death.
Signal words
WARNING!
WARNING indicates a hazardous situation, which if not avoided, could result in death or serious
injury.
CAUTION!
CAUTION indicates a hazardous situation, which if not avoided, could result in minor or moderate
injury.
Signal word panels
DANGER indicates a hazardous situation, which if not avoided, will result in death
or serious injury.
NOTICE indicates a non-hazardous situation, which if not avoided, could result in
property damage.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Intended use statement
Intended use
The machine is used to cut virtually any type of material, including metal, stone, glass, and
composites, across various industrial sectors.
Additional applications may be possible, but only with appropriate adjustments to the machine,
which must be discussed with the manufacturer. A new Conformity Evaluation may be required
and additional guidelines may then apply.
Any other use of the machine is not in accordance with its intended use and therefore not
permissible.
In particular, the machine is not meant for the processing of explosive materials or materials that
release explosive emissions. The machine may not be operated in areas that are vulnerable to
explosions. In addition, the machine is not designed for food processing.
During normal operation of the machine, the operator shall maintain a minimum safe distance of
1200 mm (48 in.) from each side of the machine.
Intended use for ancillary items
• The PASER CF900 Abrasive Delivery System (ADS) is designed for the continuous transport of
abrasive to the abrasive metering system located above the cutting head.
• Spreader bars allow a simple means of cutting small repetitive parts quickly, by duplicating the
same cutting action simultaneously across multiple cutting heads.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Intended user
System operation and maintenance should be done by Flow-trained personnel. However, other
suitably trained personnel may also operate the system and do maintenance on it.
We recommend that all service work be done by Flow Service. However, other suitably trained
personnel may do service work on the system.
Work on the electrical or control system may only be done by trained, certified electricians.
Modifications
Modifications to the system, including all machine, pump, cutting head, software, and ancillary
components, is prohibited after the manufacturer distributes the system. If the system is altered
after distribution, conformity of the machine to the EC directives and standards no longer applies
and the CE mark must be removed.
We recommend the exclusive use of original replacement parts.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Emergency medical information
WARNING! Obtain medical treatment immediately for ANY high-pressure waterjet injuries. Even
minor injuries that are painless or inconspicuous can lead to grave health problems.
It is vital that medical personnel have information about this type of injury. We recommend that anyone
who works with high-pressure waterjet equipment carry a waterproof medical alert card. This card
should describe their work and the nature of injuries inherent in using waterjets. You should also inform
medical personnel what type of abrasive you used and the type of material you cut.
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Medical Alert card part numbers (by language)
Czech …………… A-8466CZ
English …………… A-8466
French …………… A-8466F
German …………… A-8466G
Italian …………… A-8466I
Polish …………… A-8466PL
Portuguese …………… A-8466P
Russian …………… A-8466RU
Spanish …………… A-8466S
© 2021 Flow International Corp.
Retrieved from Flow KB on April 12, 2021 PST
Safety
Altri manuali Flow Attrezzature industriali
