Fluke FEV300 Istruzioni originali

FEV300

Electrical Vehicle Charging

Station Test Adapter

Safety Information

A Warning identies conditions and procedures that are dangerous

to the user. A Caution identies conditions and procedures that can

cause damage to the Product or the equipment under test.

WX Warning

To prevent the possibility of electric shock or personal injury:

• Read all safety information before you use the Product.

• Do not alter the Product and use only as specied, or the

protection supplied by the Product can be compromised.

• Carefully read all instructions.

• Do not use the Product if it operates incorrectly.

• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.

• Limit operation to the specied measurement category,

voltage, or amperage ratings.

• Do not exceed the Measurement Category (CAT) rating

of the lowest-rated individual component of a Product,

probe, or accessory.

• Comply with local and national safety codes. Use

personal protective equipment (approved rubber

gloves, face protection, and ame-resistant clothes) to

prevent shock and arc blast injury where hazardous live

conductors are exposed.

3-Year Limited Warranty.

See the Users Manual for the full warranty.

PN 5361884, May 2022

Specications are subject to change without notice.

All product names are trademarks of their respective companies.

• Do not operate the Product with covers removed or the

case open. Hazardous voltage exposure is possible.

• Do not use a current measurement as an indication

that a circuit is safe to touch. A voltage measurement is

necessary to know if a circuit is hazardous.

• Remove the input signals before you clean the Product.

• Use only specied replacement parts.

• Have an approved technician repair the Product.

• Do not use cable assembly if there is damage. Examine

the cable assembly for damaged insulation, exposed

metal. Check cable assembly continuity.

• Measure a known voltage rst to make sure that the

Product operates correctly.

• Do not use the Product around explosive gas, vapor, or in

damp or wet environments.

• Do not use the Product if it is altered or damaged.

• Examine the case before you use the Product. Look for

cracks or missing plastic. Carefully look at the insulation

around the terminals.

• Do not use cable assembly if they are damaged. Examine

the cable assembly for damaged insulation and measure

a known voltage.

• Use only accessory supplied with the Product.

• Only connect the Product to the charging stations as

indicated in the Specication section.

• Use the Product within the operating range only. The

operating range is specied in the Specication section.

Symbols

Symbol Description

WWARNING. RISK OF DANGER.

XWARNING. HAZARDOUS VOLTAGE.

Risk of electric shock.

Consult user documentation.

JEarth

TDouble Insulated.



Measurement Category II is applicable to test and

measuring circuits connected directly to utilization points

(socket outlets and similar points) of the low-voltage

MAINS installation.

PE PE Protective Earth.

CP CP Control Pilot.

Vehicles not requiring ventilation for indoor charging

areas.

Vehicles requiring ventilation for indoor charging areas.



This product complies with the WEEE Directive and its

marking requirements. The a󰀩xed label indicates that

you must not discard this electrical/electronic product

in domestic household waste. Do not dispose of this

product as unsorted municipal waste. For information

about take-back and recycling programs available in

your country, see the Fluke website.

Contact Fluke

Fluke Corporation operates worldwide. For local contact information,

go to our website: www.uke.com

To register your product, view, print, or download the latest manual

or manual supplement, go to our website.

Fluke Corporation Fluke Europe B.V

P.O. Box 9090 PO Box 1186

Everett, WA 98206 5602 BD EINDHOVEN

U.S.A. The Netherlands

Specications

General Features

Input voltage .......................... Up to 250 V (single phase system) /

up to 480 V (three phase system),

50/60 Hz, max 10 A

Internal power consumption . . 3 W max.

FEV300-CON-TY2 Plug ........ AC charging mode 3, suitable to

IEC 62196-2 type 2 socket outlet or

xed cable with vehicle connector

(type 2, 7P three-phase)

FEV300-CON-TY1 Plug ........ AC charging mode 3, suitable to

IEC 62196-2 type 1 or SAE J1772

with vehicle connector (type 1, 5P

single-phase)

Dimensions (H × W × D) ....... 110 mm × 45 mm × 220 mm

(4.3 in × 1.8 in × 8.7 in) length

without connection cable and

test cable

Weight (including type 1 or

type 2 connection cable) ....... Approx. 1 kg (2.2 lb)

Safety standards ................... IEC/EN 61010-1, pollution degree 2

IEC/EN 61010-2-030, CAT II 300 V,

protection class II

Ingress protection .................. IEC 60529: IP54 (housing)

IEC 60529: IP54 (Measuring

terminals with protection caps in

place, connector/plug in connected

condition or with protection caps in

place, otherwise IP20)

Operating temperature .......... -20 °C to 40 °C (-4 °F to 104 °F)

Storage temperature ............. -20 °C to 50 °C (-4 °F to 122 °F)

Operating humidity range ...... 10 % to 85 % relative humidity

non-condensing

Storage relative humidity ...... 0 % to 85 % non-condensing

Operating altitude .................. 2000 m (6561 ft) max.

Functions

PE Pre-Test ........................... Visible indication >50 V AC/DC

between PE conductor and

touch sensor

PP Simulation ........................ Open, 13 A, 20 A, 32 A, 63 A

CP States .............................. State A, B, C, D

CP Error state “E” .................. On/o󰀨 (CP signal short-circuited

to PE)

PE Error state "F"

(Earth fault) ............................ On/o󰀨 (interruption of PE conductor)

Outputs (for test purpose only)

Measuring terminals

L1, L2, L3, N, PE ................... Max. 250/480 V, max. 10 A

CP signal output terminals .... Approx. +/-12 V

Caution: In case of wrong wiring or error of the charging station these

terminals may be hazardous.

Altri manuali per FEV300

Indice

Altri manuali Fluke Apparecchiature di prova

Fluke

Fluke 6135A/PMU Manuale utente

Fluke

Fluke 4322 Manuale utente

Fluke

Fluke 975CK Manuale utente

Fluke

Fluke 4180 Manuale utente

Fluke

Fluke P3800 Series Manuale utente

Fluke

Fluke 199CM Guida alla configurazione

Fluke

Fluke 726 Manuale utente

Fluke

Fluke VisiFault Visual Fault Locator Manuale utente

Fluke

Fluke P3860-MPA Manuale utente

Fluke

Fluke 5500A Manuale utente

Fluke

Fluke CertiFiber Manuale utente

Fluke

Fluke 718Ex 300G Manuale utente

Fluke

Fluke CableAnalyzer DSX-500 Manuale utente

Fluke

Fluke ScopeMeter 190-202 Manuale utente

Fluke

Fluke 753 Manuale utente

Fluke

Fluke FTK100 Manuale utente

Fluke

Fluke PRV240FS Manuale utente

Fluke

Fluke ScopeMeter 196 Manuale utente

Fluke

Fluke MicroScanner Pro Manuale utente

Fluke

Fluke TL1000-KIT Istruzioni originali

Fluke

Fluke 5320A Manuale utente

Fluke

Fluke 718 30G Manuale utente

Fluke

Fluke 6109A Manuale utente

Fluke

Fluke 71X Series Manuale per l'uso e la cura

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente