Fluke SPOT Light Manuale utente
PN 4151274
February 2012 | Rev. 2, 1/22
© 2012-2022 Fluke Corporation. All rights reserved. Printed in USA. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
SPOT Light
SpO2 Functional Tester
Warranty and Product Support
Fluke Biomedical warrants this instrument against defects in materials and workmanship for two years from the date of
original purchase. You will be charged our customary fee for such calibration. During the warranty period, we will repair or at
our option replace, at no charge, a product that proves to be defective, provided you return the product, shipping prepaid, to
Fluke Biomedical. This warranty covers the original purchaser only and is not transferable. The warranty does not apply if
the product has been damaged by accident or misuse or has been serviced or modified by anyone other than an authorized
Fluke Biomedical service facility. NO OTHER WARRANTIES, SUCH AS FITNESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSED OR IMPLIED. FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, ARISING FROM ANY CAUSE OR THEORY.
This warranty covers only serialized products and their accessory items that bear a distinct serial number tag. Recalibration
of instruments is not covered under the warranty.
This warranty gives you specific legal rights and you may also have other rights that vary in different jurisdictions. Since
some jurisdictions do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages,
this limitation of liability may not apply to you. If any provision of this warranty is held invalid or unenforceable by a court or
other decision-maker of competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
7/07
Notices
All Rights Reserved
Copyright 2012-2022, Fluke Biomedical. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language without the written permission of Fluke Biomedical.
Copyright Release
Fluke Biomedical agrees to a limited copyright release that allows you to reproduce manuals and other printed materials for use in service
training programs and other technical publications. If you would like other reproductions or distributions, submit a written request to Fluke
Biomedical.
Unpacking and Inspection
Follow standard receiving practices upon receipt of the instrument. Check the shipping carton for damage. If damage is found, stop unpacking
the instrument. Notify the carrier and ask for an agent to be present while the instrument is unpacked. There are no special unpacking
instructions, but be careful not to damage the instrument when unpacking it. Inspect the instrument for physical damage such as bent or
broken parts, dents, or scratches.
Technical Support
For application support or answers to technical questions, either email [email protected] or call 1-800- 850-4608 or 1-440-
248-9300. In Europe, call +31-40-2675314.
Claims
Our routine method of shipment is via common carrier, FOB origin. Upon delivery, if physical damage is found, retain all packing materials in
their original condition and contact the carrier immediately to file a claim. If the instrument is delivered in good physical condition but does not
operate within specifications, or if there are any other problems not caused by shipping damage, please contact Fluke Biomedical or your local
sales representative.
Returns and Repairs
Return Procedure
All items being returned (including all warranty-claim shipments) must be sent freight-prepaid to our factory location. When you return an
instrument to Fluke Biomedical, we recommend using United Parcel Service, Federal Express, or Air Parcel Post. We also recommend that
you insure your shipment for its actual replacement cost. Fluke Biomedical will not be responsible for lost shipments or instruments that are
received in damaged condition due to improper packaging or handling.
Use the original carton and packaging material for shipment. If they are not available, we recommend the following guide for repackaging:
Use a double–walled carton of sufficient strength for the weight being shipped.
Use heavy paper or cardboard to protect all instrument surfaces. Use nonabrasive material around all projecting parts.
Use at least four inches of tightly packed, industry-approved, shock-absorbent material around the instrument.
Returns for partial refund/credit:
Every product returned for refund/credit must be accompanied by a Return Material Authorization (RMA) number, obtained from our Order
Entry Group at 1-440-498-2560.
Repair and Calibration:
For customers based in the U.S.A., please contact Fluke Electronics at globalcal@flukebiomedical.com, or call 1-833-296-9420.
All other customers, please go to www.flukebiomedical.com/service to find the nearest service center.
Certification
This instrument was thoroughly tested and inspected. It was found to meet Fluke Biomedical’s manufacturing specifications when it was
shipped from the factory. Calibration measurements are traceable to the National Institute of Standards and Technology (NIST). Devices for
which there are no NIST calibration standards are measured against in-house performance standards using accepted test procedures.
WARNING
Unauthorized user modifications or application beyond the published specifications may result in electrical shock hazards or improper
operation. Fluke Biomedical will not be responsible for any injuries sustained due to unauthorized equipment modifications.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a commitment by Fluke Biomedical. Changes made to the
information in this document will be incorporated in new editions of the publication. No responsibility is assumed by Fluke Biomedical
for the use or reliability of software or equipment that is not supplied by Fluke Biomedical, or by its affiliated dealers.
Manufacturing Location
The SPOT Light SpO2 Functional Tester is manufactured at Fluke Biomedical, 6920 Seaway Blvd., Everett, WA, U.S.A.
i
Table of Contents
Title Page
Introduction .................................................................................................................... 1
Intended Use .................................................................................................................. 2
Safety Information .......................................................................................................... 2
Unpack the Product........................................................................................................ 3
Instrument Familiarization .............................................................................................. 4
Accessories.................................................................................................................... 5
How to Turn On the Product........................................................................................... 6
How to Use the Product ................................................................................................. 6
SpO2 Sensor Placement ........................................................................................... 6
How to Set Test Parameters ..................................................................................... 8
How to Set Custom Tests............................................................................................... 9
Maintenance................................................................................................................... 10
How to Clean the Product.......................................................................................... 11
Battery Maintenance.................................................................................................. 11
How to Charge the Battery ................................................................................... 11
SPOT Light
Users Manual
ii
Battery Removal................................................................................................... 13
General Specifications................................................................................................... 14
Detailed Specifications .................................................................................................. 14
Oximeter SpO2Optical Emitter and Detector ............................................................ 14
iii
List of Tables
Table Title Page
1. Symbols................................................................................................................................. 2
2. Product Controls and Connections........................................................................................ 4
3. Standard Accessories ........................................................................................................... 5
4. Optional Accessories............................................................................................................. 5
5. Test Parameters.................................................................................................................... 8
SPOT Light
Users Manual
iv
Indice
Altri manuali Fluke Apparecchiature di prova
Fluke
Fluke 2AC VoltAlert Manuale di istruzioni
Fluke
Fluke 707Ex Manuale per l'uso e la cura
Fluke
Fluke 5730A Manuale elenco delle parti
Fluke
Fluke 1550C Manuale per l'uso e la cura
Fluke
Fluke 820-2 Manuale utente
Fluke
Fluke 707 Manuale utente
Fluke
Fluke CertiFiber Manuale utente
Fluke
Fluke AIRCHECK Manuale utente
Fluke
Fluke 729 Manuale utente
Fluke
Fluke 1587 Manuale utente
Fluke
Fluke 1621 Manuale utente
Fluke
Fluke 753 Manuale utente
Fluke
Fluke IT100 IntelliTone Toner Manuale utente
Fluke
Fluke ScopeMeter 190-502 Manuale di istruzioni
Fluke
Fluke P3860-MPA Manuale utente
Fluke
Fluke 718Ex 300G Manuale utente
Fluke
Fluke FiberInspector Pro FI-7000 Manuale utente
Fluke
Fluke 725Ex Manuale utente
Fluke
Fluke 6003A Manuale utente
Fluke
Fluke Series II Manuale utente
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Mercury
Mercury TSL01 Manuale utente
