Flycam FLCM-FLN-PLA Manuale utente
1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
Flowline Placid 2-Axis Stabilizing Arm (FLCM-FLN-PLA)
Assembly Manua l
Tensioner Spring
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Safety Shock Cord
2
Remove the hook from Flowline support
bar.
Take the cord bundle out from the cup and
pull the whole cord unl a cord lock comes
out.
Flowline Placid Setup
Separate the cord from cord lock and keep
the lock aside for aaching it back
aerwards.
Separate the cord also from the cup and
keep aside for mounng it back later.
Use a tool to unscrew small bolts that hold
the front pulley, from each side.
3
Mount front pulley in between the cord,
and pull the cord so that it goes back inside
the support arm. Again use tools to ghten
the bolts from each side and set the pulley
at its posion.
Turn the Placid Arm upside down. By using
an allen key, loosen the mounng bracket of
Arm. Now the bracket has enough space for
the cord to pass through it.
Insert cord into the mounng bracket. Make
sure that it is going exactly in the centre, up
into the hole of the Placid arm. Then Pull
the cord from boom of Placid arm, near
the spring, while sll holding it upside
down.
To x Placid arm at its appropriate posion,
aach one side of Safety Elasc Cord to a
knob on Placid arm. Then, drag the other
side of elasc cord across Flowline support
arm, and aach to the knob on other side
of Placid arm.
Now you can hold the Placid arm in its
standard posion. The cord is aptly set to
perform its funcon. By using an allen key,
ghten the mounng bracket of Placid Arm
with Flowline support arm.
Pull out the front pulley carefully, so it
doesn’t drop into the Flowline support bar
and Insert the cord from the bottom hole
and take it out from the top hole.
4
Fix the hook back at its actual posion, using
an allen key. Now Set the provided Spring
again in the hook.
Wear support jacket and ghten the buckles
provided at the waist, adjust as per your
convenience. Tighten the buckles provided
at the chest of support jacket, and adjust as
per your convenience.
By adjusng side support, you will move the
weight on your hips, thus resulng in
comfortable long hour shoong.
Loosen the knob of hook and aach camera
to it. Tighten with provided knob to ensure
slip-free connecon.
Put-in the cup back through the cord and
relock it with the cord lock. Roll the leover
cord inside the cup.
Install Flycam Flowline Placid and change the Spring, Follow this
https://bit.ly/3Ae0t7a
5
YOUR FLOWLINE PLACID 2-AXIS STABILIZING ARM
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of
me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor
does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to
inspecon and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
Indice
Altri manuali Flycam Accessori per fotocamere
Flycam
Flycam FLCM-5000-Q Manuale utente
Flycam
Flycam GL-020-00 Manuale utente
Flycam
Flycam DSLR-NANO-QR-BL Manuale utente
Flycam
Flycam Flowline B-FLCM-FLN-FM Manuale utente
Flycam
Flycam FLCM-EDGE-01 Manuale utente
Flycam
Flycam Flowline Series Manuale utente
Flycam
Flycam FLCM-BP Manuale utente
Flycam
Flycam FLCM-FLN-TC Manuale utente
Flycam
Flycam HD-5000 Manuale utente
Flycam
Flycam FLCM-FLN-CH Manuale utente
Flycam
Flycam FLCM-PLA-EA Manuale utente
Flycam
Flycam Redking Manuale utente
Flycam
Flycam buddy flcm-bdy Manuale utente
Flycam
Flycam 5000 PRO Manuale utente
Flycam
Flycam Vista-II Manuale utente
Flycam
Flycam HD-3000 Manuale utente
Flycam
Flycam Flowline Master Manuale utente
Flycam
Flycam FLCM-FLN-PA Manuale utente
Flycam
Flycam FLCM-FLN-PA Manuale utente
Flycam
Flycam FLCM-QR Manuale utente
