Follett HCC1000ABS Manuale utente
208264
208264
StockModule Identification Plate
StockModule Identification Plate
ServiceNo.
ServiceNo.
ModuleNo.
ModuleNo.
Product
Product
OMRESSORTHERMALLYPROTECTED
OMRESSORTHERMALLYPROTECTED
EastonPennsylvania
EastonPennsylvania
U
AMPS
AMPS
AMPS
AMPS
VOLTS
VOLTS
NSF
NSF
PHASE
PHASE
SINGLE
SINGLE
CHARGE
CHARGE
LOWSIDE
LOWSIDE
PARTNO
PARTNO
PSIG
PSIG
THEUSA
THEUSA
MADEIN
MADEIN
OZ
OZ
LL
U
R
C
R
HZ
HZ
Order parts online
www.follettice.com
self-contained
00159889R07
801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com
Horizon™Ice Machine Models with RIDE™Technology
Installation Instructions for Ice Storage Bins
HCC1000ABS, HMC1000ABS, HCC1400ABS, HMC1400ABS,
HCC1000WBS, HMC1000WBS, HCC1400WBS, HMC1400WBS,
HCE1000ABS, HME1000ABS, HCE1400ABS, HME1400ABS,
HCE1000WBS, HME1000WBS, HCE1400WBS, HME1400WBS
(See model number congurator on page 2 for details.)
2self-contained BIN • RIDE Technology
ConfigurationApplication
S RIDE™
(RIDE remote
ice delivery
equipment)
T Top-mount
400 up to
454 lbs
(206kg)
1000 up to
1036 lbs
(471kg)
1400 up to
1450 lbs
(658kg)
1650 up to
1580 lbs
(717kg)
V Vision™
H Harmony™
B Ice storage bin
J Drop-in
M Ice Manager
diverter valve
system
CondenserSeriesVoltageIcemaker
C 208-230/60/1 (icemaking head)
Self-contained only.
D 115/60/1 (icemaking head)
Self-contained and remote. If remote
unit, high side is 208-230/60/1.
E 230/50/1 (icemaking head)
Self-contained only.
F 115/60/1 (icemaking head)
Remote only. High side is
208-230/60/3.
MC Maestro™
Chewblet®
(400 Series)
HC Horizon
Chewblet
(1000, 1400,
1650 Series)
HM Horizon
Micro Chewblet
HC 1400CSVA
A Air-cooled, self-contained
W Water-cooled, self-contained
R Air-cooled, remote condensing unit
N Air-cooled, no condensing unit for
connection to parallel rack system
Chewblet®Ice Machine Model Number Configurations
BIN • RIDE Technology self-contained 3
87
5 6
43
21
Read and complete the following 8 installation steps
Front coverInternal connection
External connection
Louvered docking assembly
Bin preparation
Site preparationUnpack
Ice transport tube
4self-contained BIN • RIDE Technology
Carefully unpack and inspect the contents of your Follett ice machine. 1
Unpack
1/2"
1/2"
➊➋
➌➍
➎➏
Unpack ice machine
1. 1
BIN • RIDE Technology self-contained 5
Prepare the installation site. 2
NEMA
6-20
H_C1400A/W
H_C1000A/W
NEMA
6-15
H_E1000A/W‡
1' (0,3m)
1/4" (6,4mm)
H_E1400A/W‡
requires 15A circuit,
1.50 mm2wire
requires 20A circuit,
4.00 mm2wire
Site preparation
2.1
Provide drainage, water supply and electrical power to within 6 feet (2m)
of ice machine in accordance with local and national codes. Outdoor
installation is not recommended and will void warranty.
Electrical ➊
• H_C1000(A/W)BS 208-230/60/1-15 amps • H_C1400(A/W)BS 208-230/60/1-20 amps
• H_E1000(A/W)BS 230/50/1-15 amps‡• H_E1400(A/W)BS 230/50/1-20 amps‡
(H_E1000A/W requires 15A circuit, 1.50 mm2wire) (H_E1400A/W requires 20A circuit, 4.00 mm2wire)
‡ Plug must be provided by end user & must conform to standard EN 60 335-2-24 of the end destination.
Potable water supply ➋
• 10-70 psi (69-483kpa)
• 45 to 90 F (7 to 32 C)
• Follett recommends the use of an in-line water ltration system (#00130286)
Condenser water supply for water-cooled systems ➌
• 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.)
• 45 to 90 F (7 to 32 C)
• 1.5 gallons per minute (5.68 liters per minute)
Drain ➍
• The drain line from the ice machine must have at least 1/4" per foot pitch (6,4mm/0,3m)
Installation site requirements
2.1
6self-contained BIN • RIDE Technology
Prepare the bin 3
Bin preparation
• Remove protective tape from gaskets
Bin top preparation
3.1
➋
➊
➊
➌
• Apply gaskets
➊
• Install shuttle actuator ➋ through
dispenser top and secure with locking nut
➌
Bin top preparation
3.2
BIN • RIDE Technology self-contained 7
Louvered docking assembly 4
• Mount louvered docking assembly to wall
bracket accessory
Wall bracket accessory
• Mount louvered docking assembly to
machine stand accessory
Machine stand accessory
WARNING
• Docking station must be secured in accordance with these instructions to ensure ice machine
stability.
• Ventilation openings in the louvered docking station should be clear of obstruction
4.1 4.2
Install the louvered docking assembly.
8self-contained BIN • RIDE Technology
Ice transport tube
Install the ice transport tube. 5
1' (0,3m)
¡
¢
Hot Water
160 F (71 C)
1/4˝ (6,4mm)
Ice transport tube tips
• Insulate entire length of ice transport tube ➊
• Secure ice transport tube ➋as needed to prevent dips and traps from forming. For long tube
runs see guide on page 14.
• Pitch ice transport tube at least 1/4" per foot (6,4mm/.3m) ➌
• Ice transport tube must drain towards ice machine
Ice transport tube to bin
• Be sure tube ends are square ➍
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎
before making connection to ease assembly
• Push ice transport tube onto ice machine nipple ➏
• Install hose clamp ➐
Ice transport tube to Ice machine
• Be sure tube ends are square ➑
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎
before making connection to ease assembly
• Push ice transport tube onto ice machine nipple ➒
• Install hose clamp ➓
Ice transport tube installation
5.1
BIN • RIDE Technology self-contained 9
Connect utilities to louvered docking assembly. 6
External connections
➊
➌
➋
➍
➋
➊
• Remove access panel if necessary
• Install drain line ➊.
The rigid drain line from the ice machine
must have at least 1/4" per foot pitch
(6,4mm/0,3m).
• Install ice machine potable water
supply ➋
• Replace access panel
Air-cooled ice machines only
• Remove access panel if necessary
• Install drain line ➊.
The rigid drain line from the ice machine
must have at least 1/4" per foot pitch.
• Connect cooling water supply ➋and
return ➌
• Install ice machine potable water
supply ➍
• Replace access panel
Water-cooled ice machines only
6.1 6.2
10 self-contained BIN • RIDE Technology
Connect louvered docking assembly to ice
machine. 7
Internal connections
Air-cooled ice machines – follow steps 7.1 through 7.4.
➊
➋
• Slide ice machine into louvered docking
assembly ➊
• Insert ice transport tube all the way into
coupling and tighten nut rmly ➋
Ice transport tube
7. 1
➊
➋
➊
➋
• Insert potable water line into valve ➊
• Push drain line over hose barb on
back of evaporator mount ➋
Potable water line
7. 2
• Position plate into opening and secure
with supplied screw
Power cord
7. 4
➊
• Remove twist tie
• Carefully pass plug thru opening and plug
into wall outlet
Power cord
7. 3
CAUTION
• Plug must be accessible after nal installation.
• H_E1400A/W 230/50/1 requires a 20A circuit (4.00 mm2wire)
Questo manuale è adatto per i seguenti modelli
15
Indice
Altri manuali Follett Macchina per il ghiaccio
Follett
Follett HCD1650RBT Manuale utente
Follett
Follett Maestro Plus MCC425A BS Manuale operativo
Follett
Follett 7FS100A Guida all'installazione
Follett
Follett Horizon Elite series Manuale utente
Follett
Follett H_C700AHS Manuale utente
Follett
Follett Horizon Elite 1410 Series Manuale operativo
Follett
Follett HCC1010A Manuale operativo
Follett
Follett U300 Series Manuale utente
Follett
Follett Horizon Chewblet 710 Series Manuale utente
Follett
Follett Symphony 25HI400A Supplemento
Follett
Follett Horizon Elite 2110 Series Manuale utente
Follett
Follett L77091 Guida all'installazione
Follett
Follett Ice Pro EDB1000-SA Series Manuale utente
Follett
Follett 7UC100A Manuale utente
Follett
Follett Horizon Elite HCE710A Manuale operativo
Follett
Follett Horizon Elite Chewblet 1010 Series Manuale utente
Follett
Follett Horizon Elite HCC710AJS Manuale utente
Follett
Follett 400 Series Supplemento
Follett
Follett Horizon Elite series Manuale utente
Follett
Follett Horizon Elite Chewblet HCD1010RVS Manuale utente
