FOREVER Call Me 2 Manuale utente

MANUAL

Smartwatch KW-60

(long version)

Thank you for buying Setty brand product. Before use, read

EN this instruction manual and keep it for future reference. Do not

open the device on your own –any repairs should be carried

out by a serviceman. Only use original parts and accessories

supplied by the manufacturer. The device must not be exposed

to direct fire or other heat sources. We hope that Setty will meet

your expectations.

Introduction

Before using the kids watch, carefully read the instruction ma -

nual to ensure correct operation. Kids watch is a small telecom-

munication device, used to locate its position and send data.

Operation of the device is based on GSM/GPRS mobile network.

Specification

Display: 1.44’’ 128x128 px

Touch screen: yes

Standby time: do 2-3 days

Charging time: 2-3 hours

Strap length: 230 mm

Battery: 400mAh

Camera: yes

Microphone and speaker: built-in

Sim card: micro SIM (with no PIN lock)

Compatibility: Android ≥5.0 , iOS ≥10.0

Important!

The device requires installation of a micro SIM card with active

service, allowing to make and receive calls, with no PIN lock. It is

recommended to deactivate voicemail. When sending informa-

tion regarding location, the watch will require access to mobile

Internet, therefore, you should buy at least 1 GB package. Use of

the watch may be associated with fees for using the network and

n a

dan

’

ff.

Device description

Speaker

Micro USB connector

Microphone

Camera

Answear the call / Turning on the flashlight (after pressing

twice)

Flashlight

On/Off/SOS buton/Return to mine screen

Function touch button - return to the start screen

The set includes

smartwatch

charging cable

user manual

Charging

It is recommended to use a charger of output parameters of

5V ⎓1A. Charger is not included in the set. Full charging time

of the watch is approximately 2 hours. Open the plug protec -

ting the micro USB port, then connect the included micro USB

cable and connect the device to a power source.

Installing the SIM card

Always make sure your watch is turned off before inserting or

removing the SIM card. Never insert or remove the SIM card

when the watch is turned on. Open the back cover of the watch

by gently prying it at the top and sides until the latches are unfa-

stened. Then remove the battery, taking care not to damage the

battery cables. Remember its position. Open the micro sim card

cover by sliding it slightly to the right, and then insert the SIM

card into the slot in such a way that the sim card chip is facing

upwards to the watch screen. Then close the lock by sliding to

the left. Place the batteri in the watch in it original position, then

close the back cover by pressing the latches.

First run

EN After installing the SIM card in the watch and charging the devi-

ce, you can start it by pressing and holding the on button.

- After starting, the watch connects to the mobile network.

Device operation

We operate the device via a touch screen. By sliding your finger

on the screen, you can switch between individual functions and

you select a given function by pressing the screen.

Device home screen showing the current date and time as well as

battery level. On this screen, we also see the icon for connecting

to the mobile network and the icon for the amount of contractual

awards received.

Enables you to make a phone call by manually entering the number.

The phone book gives you access to 10 contacts defined using the

application.

Allows you to take a photo that will be saved in the album.

Access to the last photo taken. Possibility to preview, send or delete

it. Each subsequent photo taken overwrites the previous one.

A simple math game with three levels.

It allows you to send voice messages and receive text and voice

messages.

It allows you to start the flashlight built into the watch.

It allows you to read the registration QR code for the device and the

application QR code.

4. Use of application

Download the „Forever Care” app for iOS or „Forever KidsCare”

for Android.

Account and watch registration:

In the registration window, enter your email address, password and

the area of use of the watch. Then enter or scan the watch code (REG

CODE) found on the bottom of the box and on the watch.

Functions

Chat: Send a text or voice message to the watch by typing it on

the keyboard or recording it using the phone’s microphone.

You can also listen to the voicemails sent from the watch here.

Route: select the date and time slot to display the traveled

route.

Map: Select the map icon to view the current location of the

watch.

Safety zone: designate a safety zone, when the watch will fo-

und outside the selected zone, you will receive a notification

from the app.

- Reward: Select the number of rewards you want to send to

EN your child. After approval, the information about the award

will be sent to the watch.

Alarm clock: alarm clock settings. Set the desired time and

frequency of repeat.

Find Watch: Select a feature to find your device if it’s near

you. The watch will ring to inform you of its location.

Notifications: This is where you get and preview any notifica-

tions and alarms you receive from the watch.

Remote camera: take a photo using the watch camera and

receive it on your phone. The captured image appears after

a certain waiting time, depending on the signal strength of

the cellular network.

My profile:

•

Personal data: Your account settings

•

Device list: Add, edit or remove a connected devices

•

Change Password: Change the password for your account.

Settings

•

SOS numbers: when the watch user presses and holds the

SOS button, the watch makes an automatic emergency call to

three contacts defined on list.

•

Voice monitoring: enter the phone number to be called

from the watch in order to listen to its surroundings. Pick up

the call and check what’s happening nearby. The user of the

watch has no notification that such a call has been made.

•

Do not disturb: Select the time during the day when the user

of the watch will not receive phone calls.

•

Location mode: select normal mode - refreshing the watch’s

location once every ten minutes, power saving - once every

hour, tracking - once every minute.

•

SMS notifications: enter the number to which you want to

receive SMS notifications about events such as: low battery

level in the watch, triggering the SOS alarm using the watch

button.

•

Phone book: Define up to ten contacts that the watch user

will have in the phone book.

•

Time zone: set your time zone than the device shows the cor-

rect date and time on.

•

Language: Choose language for your device from the available.

•

Settings switch: Enable or disable the watch function.

•

LBS Location: Enable or disable location using network ope-

rators antennas.

•

Turn off watch remotely: watch will be turned off.

FAQ

The application does not receive commands and shows in-

formation that the watch is disconnected from the network.

–Check whether GMS signal is correct–whether the range columns

are available / visible on the display. - - - If they are crossed out,

please turn off your watch.

Check if the SIM card is properly installed in the watch, if it supports

2G internet and if there is an internet data package available.

Turn on the device. If the range columns are still crossed out, go to

the next point.

Check if there are data transfer arrows, if not, set APN (Access Point

Name - specific packet network, e.g. internet):

Please send a text messag e to the number of the watch with the con -

tent:

pw,123456,apn,YYYYY,,,XXXXX#

* the Xcharacter stands for digits of MNC and MCC codes assigned to

a specific operator, e.g .:

26003 –ORANGE

26001 –PLUS

26006 –PLAY

26002 –T-MOBILE

the remaining digits of the codes are available at manual/forever.eu or

www.mcc-mnc.com/

* Instead of the

characters, enter

the operator's individual APN

name.

After sending the message,

wait several minutes for KidsWatch to

download the settings from the network

. Data transfer arrows will

appear.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali FOREVER Orologio

FOREVER

FOREVER Forevive SB-320 Manuale utente

FOREVER

FOREVER SEE ME!2 Manuale utente

FOREVER

FOREVER Icon II AW-110 Manuale utente

FOREVER

FOREVER LOOK ME! 2 Manuale utente

FOREVER

FOREVER FindMe! 2 Manuale utente

FOREVER

FOREVER Forevive SB-320 Manuale utente

FOREVER

FOREVER SIVA ST-100 Manuale utente

FOREVER

FOREVER ICON AW-100 Manuale utente

FOREVER

FOREVER Look Me KW-500 Manuale utente

FOREVER

FOREVER iGO JW-100 Manuale utente

FOREVER

FOREVER CALL ME! KW-50 Manuale utente

FOREVER

FOREVER SB-305 Manuale utente

FOREVER

FOREVER SW-500 Manuale utente

FOREVER

FOREVER GRAND SW-700 Manuale utente

FOREVER

FOREVER Care Me Manuale utente

FOREVER

FOREVER Forevive SB-320 Manuale utente

FOREVER

FOREVER ICON AW-100 Guida utente

FOREVER

FOREVER iGO JW-100 Manuale utente

FOREVER

FOREVER KW-210 Manuale utente

FOREVER

FOREVER ForeVigo 2 SW-310 Manuale utente

FOREVER

FOREVER SEE ME! 2 Manuale utente

FOREVER

FOREVER CALL ME! 2 Manuale utente

FOREVER

FOREVER ForeVive Lite Manuale utente

FOREVER

FOREVER Forevigo SW-300 Manuale utente

Manuali Orologio popolari di altre marche

Pandora

Pandora WATCH2 Manuale utente

Casio

Casio QW-4343 Manuale utente

Suunto

Suunto X6 Manuale utente

Seiko

Seiko N830 Manuale utente

MotionX

MotionX 365 Manuale utente

Garmin

Garmin VENU SQ 2 Manuale utente

QCY

QCY Watch GTC Manuale utente

Canyon

Canyon Cindy CNE-KW41WP Manuale utente

Esq

Esq Watches Guida all'installazione

Crane

Crane AA5-CDSM-3A Manuale utente

Timex

Timex W-214 Manuale utente

DETOMASO

DETOMASO MATERA Manuale utente

Geemarc

Geemarc Watch N Shake Manuale utente

LORUS

LORUS W590 Manuale utente

STENLILLE

STENLILLE Actío Manuale utente

Casio

Casio 5594 Manuale utente

Sinn

Sinn HUNTER'S WATCH 3. Edition Manuale utente

Slazenger

Slazenger SLZ800 Manuale utente